Knowledge on moisture transport in wood is important for understanding its utilization, durability and product quality. Moisture transport processes in wood can be studied by Nuclear Magnetic Resonance (NMR) imaging. By combining NMR imaging with relaxometry, the state of water within wood can be identified, i.e. water bound to the cell wall, and free water in the cell lumen/vessel. This paper presents how the transport of water can be monitored and quantified in terms of bound and free water during water uptake and drying. Three types of wood from softwood to hardwood were selected covering a range of low to high density wood; pine sapwood and oak and teak. A calibration is performed to determine the different water states in each different wood type and to convert the NMR signal into moisture content. For all wood types, water transport appeared to be internally limited during both uptake and drying. In case of water uptake, free water was observed only after the cell walls were saturated with bound water. In case of drying, the loss of bound water starts only after vanishing of free water, irrespective of the position. Obviously, there is always a local thermodynamic equilibrium of bound and free water for both uptake and drying. Finally, we determined the effective diffusion coefficient (D eff ). Experimentally determined diffusion constants were compared with those derived by the diffusion models for conceptual understanding of transport mechanism. We found that diffusion in the cell wall fibers plays a critical role in the transport process.

No abstract

Water uptake by multilayer films plays an important role in their performance. Individual layers may consist of different polymeric phases. Understanding the water uptake in such systems requires knowledge of the water distribution, its state in the polymer, and influence on the polymeric phases. This study illustrates the application of high-resolution NMR and relaxometry for measuring water distributions and evaluating water–polymer interactions. We studied water uptake in a two-layered base coat/top coat system, where the base coat consisted of acrylic, polyurethane, pigment particles, and a polymeric dispersant. Water and the polymer phases in the base coat were identified with NMR relaxometry. The water diffusivity in the base coat was determined. At high water contents water is highly mobile and is loosely bonded to the polymer. Reversible plasticization of the dispersant was observed. The polymeric dispersant seems to play a key role in the sorption of water by the coating.

No abstract

The hypothesis of whether early life exposure (both pre- and early postnatal) to endocrine-disrupting chemicals (EDCs) may be a risk factor for obesity and related metabolic diseases later in life will be tested in the European research project OBELIX (OBesogenic Endocrine disrupting chemicals: LInking prenatal eXposure to the development of obesity later in life). OBELIX is a 4-y project that started in May 2009 and which has the following 5 main objectives: 1) to assess early life exposure in humans to major classes of EDCs identified as potential inducers of obesity (ie, dioxin-like compounds, non-dioxin-like polychlorinated biphenyls, organochlorine pesticides, brominated flame retardants, phthalates, and perfluorinated compounds) by using mother-child cohorts from 4 European regions with different food-contaminant exposure patterns; 2) to relate early life exposure to EDCs with clinical markers, novel biomarkers, and health-effect data related to obesity; 3) to perform hazard characterization of early life exposure to EDCs for the development of obesity later in life by using a mouse model; 4) to determine mechanisms of action of obesogenic EDCs on developmental programming with in vivo and in vitro genomics and epigenetic analyses; and 5) to perform risk assessments of prenatal exposure to obesogenic EDCs in food by integrating maternal exposure through food-contaminant exposure and health-effect data in children and hazard data in animal studies.