Lemongrass fiber was analyzed to determine the chemical proportion of its lignocellulosic components. Fibers' thermal behavior, surface structures, and functionality were assessed by thermogravimetric analysis (TGA), scanning electron microscope (SEM), and Fourier transforminfrared spectroscopy (FT-IR), respectively. High-density polyethylene (HDPE) matrix composites filled with varying (10%, 20%, 30%, 40%, and 50%) fiber content were prepared and investigated. Composite wicker was made from HDPE and low density polyethylene (LDPE) blend-matrix and 10% alkaline modified fiber. Alkaline or maleic anhydride grafted polypropylene (MA-g-PP) was used to improve the compatibility between the fiber and matrices. The composites were evaluated by using TGA, SEM microscopy, and universal testing machine, respectively. The fiber was constituted by equitable amounts of lignocellulosic components with cellulose accounting for the highest proportion. It also exhibited high degradation temperature, which was further increased following alkaline modification. Superior thermal degradation behavior was measured for modified fiber composites. SEM showed that the modified fiber composites demonstrated better compatibility. Lemongrass fiber reinforcement substantially improved the mechanical properties of the composites.
This study investigates the effect of modified wheat straw on the physical and mechanical properties of modified wheat straw/high-density polyethylene (MWS/HDPE) straw-plastic composites. Wheat straw fibers with particle sizes in the range of 0.25 to 0.50 mm were modified with caprolactam (CPL). A Fourier transform infrared spectroscopy (FT-IR) analysis of MWS showed that when the CPL level was 5%, the intensity of the hydroxyl (O-H) and carbonyl (C-O) absorption peaks noticeably decreased, indicating a corresponding decrease in the polarity of the fibers. A physical analysis of the wheat straw fibers indicated that after the modification, the characteristics of the fibers were closer to those of the HDPE polymer matrix, thus contributing to good compatibility and dispersion of the straw fibers within the matrix. The composites of the highdensity polyethylene with modified wheat straw particles were successfully synthesized using the melt blend method. The prepared composites were characterized using scanning electron microscopy (SEM), and their mechanical properties were investigated. The MWS/HDPE composites showed superior mechanical properties because of a greater compatibility of MWS with HDPE. The modified WS fibers function as "biological steel," reinforcing the HDPE to produce bio-composites.
Nowadays, there is an increasing concern toward substituting the scarce wood fibers with alternative lignocellulosic fibers that originate from crop residue to reinforce biocomposites. In this paper, the potential application of coffee hull (CH) of the reinforced polyethylene (PE) matrix composites was studied for the first time. Experiments of composite that enhanced with CH on mechanical properties, hydroscopicity, thermogravimetric analysis, fiber treatment, and microstructures were tested in this study. The PE matrix was reinforced with varying volume fractions of CH and was studied. The results show that incorporation of coffee hull markedly improved the mechanical properties of the reinforced high-density polyethylene (HDPE) matrix composites. Micrographs show a strong interfacial adhesion between the CH fiber particles. This property may be the main reason for the stability between composites. At the same time this work investigated the effect of different treatments on the mechanical properties and water absorption behavior of composites. The fiber surface treatments were done using active chemicals such as calcium hydroxide (Ca(OH) 2), silane coupling agent (SCA), maleic anhydride grafted polypropylene (MA-g-PP), stearic acid (SA), ethylene bis stearamide (EBS) and the combination (MA-g-PP, SA, EBS). The results show that (Ca(OH) 2)treatment is the best way to improve its properties. Probably because attributed to removal of surface active functional groups (-OH) from the CH fiber and induction of hydrophobicity that in turn improved the compatibility with the polymer matrix. As a result, the use of coffee hull in composites could have great significance for the industry.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.