Selective catalytic hydrogenation has wide applications in both petrochemical and fine chemical industries, however, it remains challenging when two or multiple functional groups coexist in the substrate. To tackle this challenge, the “active site isolation” strategy has been proved effective, and various approaches to the site isolation have been developed. In this review, we have summarized these approaches, including adsorption/grafting of N/S-containing organic molecules on the metal surface, partial covering of active metal surface by metal oxides either via doping or through strong metal–support interaction, confinement of active metal nanoparticles in micro- or mesopores of the supports, formation of bimetallic alloys or intermetallics or core@shell structures with a relatively inert metal (IB and IIB) or nonmetal element (B, C, S, etc.), and construction of single-atom catalysts on reducible oxides or inert metals. Both advantages and disadvantages of each approach toward the site isolation have been discussed for three types of chemoselective hydrogenation reactions, including alkynes/dienes to monoenes, α,β-unsaturated aldehydes/ketones to the unsaturated alcohols, and substituted nitroarenes to the corresponding anilines. The key factors affecting the catalytic activity/selectivity, in particular, the geometric and electronic structure of the active sites, are discussed with the aim to extract fundamental principles for the development of efficient and selective catalysts in hydrogenation as well as other transformations.

Nanostructured Fe-N-C materials represent a new type of "platinum-like" non-noble-metal catalyst for various electrochemical reactions and organic transformations. However, no consensus has been reached on the active sites of the Fe-N-C catalysts because of their heterogeneity in particle size and composition. In this contribution, we have successfully prepared atomically dispersed Fe-N-C catalyst, which exhibited high activity and excellent reusability for the selective oxidation of the C-H bond. A wide scope of substrates, including aromatic, heterocyclic, and aliphatic alkanes, were smoothly oxidized at room temperature, and the selectivity of corresponding products reached as high as 99%. By using sub-ångström-resolution HAADF-STEM in combination with XPS, XAS, ESR, and Mössbauer spectroscopy, we have provided solid evidence that Fe is exclusively dispersed as single atoms via forming FeN (x = 4-6) and that the relative concentration of each FeN species is critically dependent on the pyrolysis temperature. Among them, the medium-spin FeN affords the highest turnover frequency (6455 h), which is at least 1 order of magnitude more active than the high-spin and low-spin FeN structures and 3 times more active than the FeN structure, although its relative concentration in the catalysts is much lower than that of the FeN structures.

The catalytic hydrogenation of nitroarenes is an environmentally benign technology for the production of anilines, which are key intermediates for manufacturing agrochemicals, pharmaceuticals and dyes. Most of the precious metal catalysts, however, suffer from low chemoselectivity when one or more reducible groups are present in a nitroarene molecule. Herein we report FeO x -supported platinum single-atom and pseudo-single-atom structures as highly active, chemoselective and reusable catalysts for hydrogenation of a variety of substituted nitroarenes. For hydrogenation of 3-nitrostyrene, the catalyst yields a TOF of B1,500 h À 1 , 20-fold higher than the best result reported in literature, and a selectivity to 3-aminostyrene close to 99%, the best ever achieved over platinum group metals. The superior performance can be attributed to the presence of positively charged platinum centres and the absence of Pt-Pt metallic bonding, both of which favour the preferential adsorption of nitro groups.

The single-atom Co–N–C catalyst with the structure of CoN4C8-1-2O2 shows excellent performance for the chemoselective hydrogenation of nitroarenes to produce azo compounds under mild reaction conditions.

Cubosomes, a product of nanobioengineering, are self-structured lipid nanoparticles that act like drug-loaded theranostic probes. Here, we describe a simple method for the preparation of combinatorial drug-loaded cubosomes with, proof-of-principle, therapeutic effect against cancer cells, along with diagnostic capabilities. Anticancer drugs cisplatin and paclitaxel were loaded in the cubosomes in combination. The cubosomes were coated with a layer of poly-Ɛ-lysine, which helped avoid the initial burst release of drug and allowed for a slow and sustained release for better efficacy. Cubosomes were imaged by transmission electron microscope, and their dispersion analyzed in vitro by differential scanning calorimetric and X-ray diffractogram studies. The microscopic images depicted spherical polyangular structures, which are easily distinguishable. The analyses revealed that the drug is uniformly dispersed all through the cubosomes. Further characterization was carried out by zeta-potential measurement, in vitro release, and entrapment efficiency studies. The in vitro studies established that the coating of cubosomes successfully reduced the burst release of drugs initially and confirmed a slow, sustained release over increased time. Comparative cytotoxicity of coated, uncoated, and blank cubosomes was evaluated, using human hepatoma HepG2 cell line, and the formulations were found to be entirely nontoxic, similar to the blank ones. The therapeutic efficiency of the cubosomes against HeLa cells was confirmed by the impedance measurement and fluorescent imaging. Furthermore, the reduction in impedance in cells treated with coated combinatorial cubosomes proved the impairment of HeLa cells, as confirmed by fluorescence microscopy.

No abstract

Selective hydrogenation of acetylene to ethylene is an industrially important reaction. Pd-based catalysts have been proved to be efficient for the acetylene conversion, while enhancing the selectivity to ethylene is challenging. Here, we chose Cu as the partner of Pd, fabricated an alloyed Pd single-atom catalyst (SAC), and investigated its catalytic performance for the selective hydrogenation of acetylene to ethylene under a simulated front-end hydrogenation process in industry: that is, with a high concentration of hydrogen and ethylene. The Cu-alloyed Pd SAC showed ∼85% selectivity to ethylene and 100% acetylene elimination. In comparison with the Au- or Ag-alloyed Pd SAC, the Cu-alloyed analogue exceeded both of them in conversion, while the selectivity rivaled that of the Ag-alloyed Pd SAC and surpassed that of the Au-alloyed Pd SAC. As Cu is a low-cost metal, Cu-alloyed Pd SAC would minimize the noble-metal usage and possess high utilization potential for industry. The Cu-alloyed Pd SAC was verified by EXAFS, with the Pd/Cu atomic ratio lowered to 0.006, corresponding to the loading of Pd at 494 ppm. The microcalorimetric measurement results demonstrated that the adsorption of C2H4 over the Cu-alloyed Pd SAC was weaker than that over the catalyst with large Pd ensembles; thus, the selectivity to ethylene was greatly enhanced. At the same time, the adsorption of H2 was stronger than that over the corresponding monometallic Cu catalyst; thus, the activation of H2 was obviously promoted. On the basis of the above results, a possible reaction path over the Cu-alloyed Pd SAC was proposed. Furthermore, by systematic comparison of the IB-metal-alloyed Pd SACs, we found that the apparent activation energies of the IB-metal-alloyed Pd SACs were close to each other, indicating similar active sites and/or catalytic mechanisms over the three catalysts. The isolation of the Pd atoms by the IB metal distinctly contributed to both the conversion and the selectivity. Further DFT calculation results suggested that electron transfer between the IB metal and Pd might be responsible for their different selectivities to ethylene.

Lithium‐oxygen (Li‐O2) batteries are one of the most promising candidates for high‐energy‐density storage systems. However, the low utilization of porous carbon and the inefficient transport of reactants in the cathode limit terribly the practical capacity and, in particular, the rate capability of state‐of‐the‐art Li‐O2 batteries. Here, free‐standing, hierarchically porous carbon (FHPC) derived from graphene oxide (GO) gel in nickel foam without any additional binder is synthesized by a facile and effective in situ sol‐gel method, wherein the GO not only acts as a special carbon source, but also provides the framework of a 3D gel; more importantly, the proper acidity via its intrinsic COOH groups guarantees the formation of the whole structure. Interestingly, when employed as a cathode for Li‐O2 batteries, the capacity reaches 11 060 mA h g−1 at a current density of 0.2 mA cm−2 (280 mA g−1); and, unexpectedly, a high capacity of 2020 mA h g−1 can be obtained even the current density increases ten times, up to 2 mA cm−2 (2.8 A g−1), which is the best rate performance for Li‐O2 batteries reported to date. This excellent performance is attributed to the synergistic effect of the loose packing of the carbon, the hierarchical porous structure, and the high electronic conductivity of the Ni foam.