In this work it was carried out the bioremediation of water containing chlorides with native microalgae (MCA) provided by the Centre for study and research in biotechnology (CIBIOT) at Universidad Pontificia Bolivariana. Microalgae presented an adaptation to the water and so the conditions evaluated reaching a production of CO 2 in mg L -1 of 53.0, 26.6, 56.0, 16.0 and 30.0 and chloride removal efficiencies of 16.37, 26.03, 40.04, 25.96 and 20.25% for microalgae1, microalgae2, microalgae3, microalgae4 and microalgae5 respectively. Water bioremediation process was carried out with content of chlorides in fed batch system with an initial concentration of chlorides of 20585 mg L -1 every 2 days. The Manipulated variables were: the flow of MCA3 (10% inoculum) for test one; NPK flow for test two, and flow of flow of MCA3+0.5 g L -1 NPK. Chloride removal efficiencies were 66.88%, 63.41% and 66.98% for test one, two and three respectively, for a total bioprocess time of 55 days.Keywords: chlorides in water, bioremediation, native algae, paper industry, feed batch. Potencial de microalga na biorremediação da água com conteúdo de cloretos ResumoNeste trabalho avaliou-se a biorremediação da água com conteúdos de cloretos utilizando microalgas nativas (MCA) fornecidas pelo Centro de Estudos e Pesquisas em Biotecnologia (CIBIOT) da Universidad Pontifícia Bolivariana. As microalgas empregadas apresentaram uma adaptação ao meio de cultura e as condições operacionais avaliadas atingindo uma produção de CO2 em mg L -1 de 53,0, 26,6, 56,0, 16,0 e 30,0 e eficiências de remoção de cloretos de 16,37, 26,03, 40,04, 25,96 e 20,25% para MCA1, MCA2, MCA3, MCA4 e MCA5 respectivamente. A biorremediação da água com conteúdos de cloretos foi realizada em modo batelada alimentada (Feed Batch) com uma concentração inicial de cloretos de 20585 mg L -1. A alimentação foi realizada a cada 2 dias. A variável manipulada foi: ensaio um, uma vazão de MCA3 (10% de inoculo); ensaio dois, uma vazão de NPK e ensaio três, uma vazão de MCA3+0,5 g L -1 NPK. As eficiências de remoção foram 66,88%, 63,41% e 66,98% para os ensaios um, dois e três, respectivamente num tempo do bioprocesso total de 55 dias.Palavras-chave: cloretos na água, biorremediação, algas nativas, industria de papel, batelada alimentada.
Scaling up bioprocesses from the experimental to the pilot or industrial scale involves heuristics and scale relationships that are far from the specific phenomena and are usually not connected to the experimental data. In complex systems, the scaling-up methodology must connect the experimental data with the tools of engineering design. In this work, a two-stage gold bioleaching process was used as a case study to develop a mathematical model of bioprocess scaling that combines the design of experiments with dimensional analysis using the Buckingham Pi theorem to formulate a predictive model that allows scaling up bioprocesses. It was found that the C/N, C/K, and T/C ratios are dimensionless factors that can explain the behavior of a system. Using the Pearson Product–Moment bivariate analysis, it was found that the dimensionless factors C/N and C/K were correlated with the leaching potential of the fermented broth at 1060 cm−1. With these results, a non-linear logarithmic model based on dimensionless parameters was proposed to explain the behavior of the system with a correlation coefficient of R2 = 0.9889, showing that the optimal conditions to produce fermented broth comprised a C/N ratio close to 50 and a C/K ratio close to 800, which allows predicting the scaling of the bioprocess.
This review paper explores the potential of bioleaching as a sustainable alternative for recovering metals from solid matrices. With over 12 billion tons of solid waste annually worldwide, bioleaching provides a promising opportunity to extract metals from solid waste, avoiding harmful chemical processes. It explains bacterial and fungal bioleaching techniques that extract copper, gold, zinc, and other metals from solid matrices. Fungal bioleaching effectively extracts a wide range of valuable metals, including nickel, vanadium, aluminium, molybdenum, cobalt, iron, manganese, silver, platinum, and palladium. The review highlights different solid matrices with metal contents that have the potential to be recovered by bioleaching, presenting promising bioprocess alternatives to current industrially available technologies for metal recovery. The optimal conditions for bioleaching, including pH, temperature, agitation–aeration, and pulp density are also discussed. The review shows that bioleaching has the potential to play a crucial role in the transition to a more sustainable and circular economy by providing an efficient, cost-effective, and environmentally friendly method for metal recovery from solid matrices.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.