The low carbon steel has good ductility that is favorable for forming process, but its low strength leads to limiting their application for forced structures. This paper studied improving strength of low-carbon steel via rolling deformation and dual-phase treatment. The results showed that the dual-phase treated steel had a combination of high strength and good ductility; its tensile ultimate strength reached 740 MPa with elongation at fracture of over 15%, while that of the cold-rolled steel only reached 700 MPa with elongation at fracture of under 3%. Based on the obtained results, relationships between mechanical properties and dual-phase processing parameters were established to help users choose suitable-processing parameters according to requirements of products.
Tính chất của vật liệu composite nhựa gỗ chịu ảnh hưởng của nhiều yếu tố, trong đó, yếu tố mang tính quyết định đến tính chất của sản phẩm là khả năng tương tác tại bề mặt tiếp xúc giữa hai pha gỗ-nhựa. Để cải thiện khả năng tương tác giữa hai pha này, qua đó làm tăng cường tính chất cơ học, việc sử dụng các phụ gia trợ tương hợp là rất cần thiết. Trong bài báo này, ảnh hưởng của phụ gia trợ tương hợp MAPE đến các tính chất của vật liệu composite nhựa gỗ trên cơ sở nhựa polyethylene tái chế đã được nghiên cứu. Kết quả nghiên cứu cho thấy rằng: việc bổ sung thêm MAPE đã cải thiện khả năng gia công của vật liệu ở trạng thái nóng chảy, làm tăng cường các tính chất cơ học và giảm đáng kể độ hấp thụ nước. Quan sát ảnh hiển vi điện tử quét (SEM) cấu trúc của vật liệu cho thấy rằng: khi sử dụng phụ gia tương hợp, bột gỗ phân tán đồng đều hơn trong nền nhựa, không còn sự phân tách pha rõ rệt so với mẫu đối chứng. Khi bổ sung phụ gia tương hợp MAPE với hàm lượng 4 pkl: vật liệu có độ bền kéo tăng khoảng 62 % (từ 6,67 MPa lên 10,84 MPa), độ bền uốn tăng khoảng 73 % (từ 12,26 MPa lên 21,12 MPa).
Bài báo trình bày kết quả nghiên cứu về tổng hợp và đánh giá một số tính chất theo yêu cầu kỹ thuật của nhựa TΦ-60 (LB Nga) đối với nhựa poly(ethylen terephthalat-co-ethylen sebacat) copolyeste được tông hợp trong phòng thí nghiệm. Cấu trúc và tỷ lệ của thành phần terephthalat (T) và sebacat (S) đã được chứng minh và xác định bằng phổ 1H NMR. Ảnh hưởng của tỷ lệ T/S lên các tính chất nhựa, tính chất keo dán cũng được khảo sát. Từ các kết quả này chỉ ra rằng, nhựa poly(ethylen terephthalat-co-ethylen sebacat) copolyeste có tỷ lệ T/S từ 60/40 đến 70/30 đáp ứng được các yêu cầu kỹ thuật của nhựa TΦ-60 và có thể sử dụng để thay thế loại nhựa này.
Trong sản xuất vật liệu composite nhựa gỗ, để giảm chi phí sản xuất và cải thiện một số tính chất của vật liệu, việc sử dụng các chất độn khoáng là rất cần thiết. Trong bài báo này, ảnh hưởng của bột đá đến tính chất của vật liệu composite nhựa gỗ được chế tạo trên cơ sở nhựa polyethylene tái chế và bột gỗ đã được nghiên cứu. Kết quả nghiên cứu cho thấy: việc bổ sung bột đá với hàm lượng phù hợp đã cải thiện khả năng gia công của vật liệu ở trạng thái nóng chảy, cũng như các tính chất cơ lý khác như độ bền kéo, độ bền uốn. Khi bổ sung bột đá với hàm lượng 15 % khối lượng so với bột gỗ và nhựa (pkl), vật liệu cho tínhchất tối ưu nhất với độ bền kéo tăng khoảng 20% (từ 10,84 MPa lên 13,16 MPa), độ bền uốn tăng khoảng12 % (từ 21,12 MPa lên 23,70 MPa), so với mẫu đối chứng không sử dụng bột đá. Khi không sử dụng bột đá, trong lòng vật liệu tồn tại nhiều khoảng trống có thể quan sát được qua ảnh hiển vi điện tử quét (SEM), những khoảng trống này là nguyên nhân của độ hút nước cao cũng như khối lượng riêng kém hơn so với mẫu sử dụng bột đá với hàm lượng phù hợp.
Đặt vấn đề: Morphin khoang dưới nhện được xem là “tiêu chuẩn vàng” trong giảm đau sau phẫu thuật lấy thai (PTLT), tuy nhiên nó gây ra nhiều tác dụng không mong muốn. Phương pháp giảm đau đa mô thức giúp giảm đau hiệu quả đồng thời giảm các tác dụng không mong muốn. Mục tiêu của nghiên cứu này là đánh giá hiệu quả giảm đau đa mô thức bằng gây tê mặt phẳng cơ ngang bụng dưới hướng dẫn siêu âm kết hợp các thuốc giảm đau đường toàn thân sau PTLT. Đối tượng và phương pháp nghiên cứu: Trong một thử nghiệm lâm sàng ngẫu nhiên đối chứng, 180 sản phụ (SP) sau PTLT được chia ngẫu nhiên thành 3 nhóm lần lượt là Para-TAP, Diclo-TAP và Para-Diclo. Nhóm Para-TAP được dùng paracetamol kết hợp gây tê mặt phẳng cơ ngang bụng (gây tê TAP), nhóm Diclo-TAP được dùng diclofenac đường trực tràng kết hợp gây tê TAP, nhóm Para-Diclo được dùng paracetamol kết hợp diclofenac đường trực tràng. Cường độ đau được đánh giá theo thang điểm đau nhìn hình đồng dạng (VAS) tại các thời điểm 1, 2, 4, 6, 8, 12, 18, 24 giờ và theo thang điểm hoạt động chức năng (FAS) trong 24 giờ sau phẫu thuật, thống kê tỉ lệ yêu cầu giải cứu đau và các tác dụng không mong muốn của các phương pháp. Giải cứu đau bằng 5 mg morphin tiêm tĩnh mạch chậm khi điểm VAS nghỉ ≥ 4 hoặc VAS vận động ≥ 5. Kết quả: Về điểm đau VAS, các SP có điểm đau từ 3 trở xuống trong nhóm Para-TAP chiếm tỉ lệ cao lúc nghỉ, nhưng thấp khi vận động; trong khi đó nhóm Diclo-TAP và Para-Diclo chiếm tỉ lệ cao cả lúc nghỉ ngơi và vận động; nhóm Para-TAP hiệu quả hơn nhóm Para-Diclo từ 4 - 6 giờ đầu; nhóm Para-Diclo hiệu quả hơn nhóm Para-TAP từ 12 - 24 giờ; nhóm Diclo-TAP hiệu quả hơn nhóm Para-Diclo từ 2 - 8 giờ. Nhóm Para-TAP có điểm FAS đạt mức A chiếm 90% trong khoảng thời gian từ 1 - 8 giờ, hơn 50% từ 8 - 16 giờ, hơn 60% từ 16 - 24 giờ; có 23,33% SP cần giải cứu đau. Nhóm Diclo-TAP có điểm FAS đạt mức A chiếm 100% trong khoảng thời gian từ 1 - 8 giờ, gần 80% từ 8 - 24 giờ; có 10% SP cần giải cứu đau. Nhóm Para-Diclo có điểm FAS đạt mức A chiếm gần 70% trong khoảng thời gian từ 1 - 16 giờ, gần 90% từ 16 - 24 giờ, có 10% SP cần giải cứu đau. Tác dụng không mong muốn chiếm tỉ lệ thấp và mức độ nhẹ ở 3 nhóm. Kết luận: Nhóm Para-TAP có hiệu quả giảm đau tốt trong 8 giờ đầu, nhóm Diclo-TAP có hiệu quả giảm đau tốt trong 24 giờ và tốt hơn nhóm Para-Diclo trong 8 giờ đầu sau phẫu thuật, tác dụng không mong muốn của các nhóm chiếm tỉ lệ thấp và mức độ nhẹ ở 3 nhóm.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.