To enhance color quality of glass-based phosphor-converted white light-emitting diodes (pc-WLEDs) with multi-layer remote phosphor layer structures, two phosphors, green CdS:In and red ZnS:Te,Mn, are integrated into the glass matrix and applied to the dual-layer and triple-layer WLED packages. The attained results were examined with Mie-scattering theory and Lambert-Beer law. The dual-layer showed significant enhancement in color rendering index (CRI), in the range of approximate 80-90. Meanwhile, CRI in the triple-layer was lower and stayed around 66. In terms of color quality scale (CQS), a more overall color evaluating index, triple-layer structure helps the glass-based WLED achieve higher value than the dual-layer. The triple-layer is also beneficial to the luminous efficacy, according to the experimented results. Thus, the triple-layer structure can be used to strengthen the benefit of the glass matrix used in WLED products.
Among the structures using for fabricating white light-emitting diodes (WLEDs) such as the conformal coating or in-cup geometries, the remote phosphor structure gives the highest luminous efficacy. However, in terms of color quality, its performance is not as good as the others. The red-light compensation has been reported as the effective solution for enhancing the color quality of WLEDs. Hence, this study adopted the idea and applied to the dual-layer phosphor structure. The phosphor used to boost the red color in light formation is (Y,Gd)BO3:Eu particle. The dual-layer remote phosphor structure was simulated with the red (Y,Gd)BO3:Eu phosphor layer above the original yellow phosphor YAG:Ce3+ one. The WLEDs with different correlated color temperatures of 5600 K, 6600 K and 7700K were experimented. Mie-theory and Lambert-Beer law were applied to examine the results. The growth in color rendering index (CRI) and color quality scale (CQS) with the increase of (Y,Gd)BO3:Eu phosphor concentration was observed. Nevertheless, the lumen efficacy would be degraded if the concentration was over a certain number. The information provided in this article is useful for the development of high-power WLED production with greater color quality.
The needs for accurate energy consumption estimation in different design alternatives are essential for all projects. The demands to achieve sustainable design drive not only the efforts of a large number of researchers and organizations all over the world but also for designers in Vietnam, especially for building design in Vietnam, whereas the green constructions are growing rapidly. The developed software in the first stage helps the designers to quickly calculate and select the alternatives for green building design. This paper is carried out under the collaboration project between Van Lang University (VLU, Vietnam) and Carnegie Mellon University (CMU, USA) to develop a software for sustainable design, which focuses on energy consumption optimization. This software is the first project towards the full software development life cycle for green design in Vietnam.
This paper illustrates the application of computational design using Rhinoceros software and Grasshopper plugin to investigate a real accommodation with respect to the solar radiation reduction. The paper also introduces the basic concepts of Building Information Modelling (BIM) utilization in construction. The multidisciplinary BIM model show that the Computable BIM Model can be used for Architecture, Structure, Mechanical - Electrical -Plumbing (MEP) to help architects, designers do sustainable design such as acoustic comfort, lighting design on effective cost manner with many rapid design options from the conceptual design phase, to facilitate wind load simulation, predict structural behaviour under fierce conditions, to estimate heat load, HVAC systems performance for energy saving and sustainable design.
While the remote phosphor structure is not an appropriate solution for WLED color uniformity, it is more advantageous for the luminous output of WLED than the conformal phosphor or in-cup phosphor structure. Acknowledging the ability of the remote phosphor structure, many studies have been carried out to surmount the color quality disadvantage of this structure. A dual-layer remote phosphor configuration is proposed in this research paper to acquire better color quality for WLEDs through heightening the color rendering index (CRI) and the color quality scale (CQS). The color temperature of the WLED packages this study is 8500 K. By inserting a layer of green CaSO4:Ce3+,Mn2+ or red LiLaO2:Eu3+ phosphor on the yellow YAG:Ce3+ phosphor layer, the phosphor structure configuration can be constructed. Then, to get the best color quality, the concentration of added phosphor LiLaO2:Eu3+ would be changed. The findings showed the rise of CRI and CQS along with the LiLaO2:Eu3+, which implies the influence of LiLaO2:Eu3+ to the growth of red light components within WLEDs packages. The greater the concentration of LiLaO2:Eu3+ is, the more the CRI and CQS increase. Meanwhile, the luminous flux gains from the green phosphor CaSO4:Ce3+,Mn2+. Nevertheless, the luminous flux and color quality would decrease if the concentrations of both red LiLaO2:Eu3+ and green CaSO4:Ce3+,Mn2+ phosphors reach a certain corresponding level. Centered on the Mie-scattering theory and the law of Lambert-Beer, this result is illustrated. The findings in this research are vital references for manufacturing WLEDs with higher white light performance.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.