No abstract

Low-dimensional materials have recently attracted much interest as thermoelectric materials because of their charge carrier confinement leading to thermoelectric performance enhancement. Carbon nanotubes are promising candidates because of their one-dimensionality in addition to their unique advantages such as flexibility and light weight. However, preserving the large power factor of individual carbon nanotubes in macroscopic assemblies has been challenging, primarily due to poor sample morphology and a lack of proper Fermi energy tuning. Here, we report an ultrahigh value of power factor (14 ± 5 mW m−1 K−2) for macroscopic weavable fibers of aligned carbon nanotubes with ultrahigh electrical and thermal conductivity. The observed giant power factor originates from the ultrahigh electrical conductivity achieved through excellent sample morphology, combined with an enhanced Seebeck coefficient through Fermi energy tuning. We fabricate a textile thermoelectric generator based on these carbon nanotube fibers, which demonstrates high thermoelectric performance, weavability, and scalability. The giant power factor we observe make these fibers strong candidates for the emerging field of thermoelectric active cooling, which requires a large thermoelectric power factor and a large thermal conductivity at the same time.

Theoretical considerations suggest that the strength of carbon nanotube (CNT) fibers be exceptional; however, their mechanical performance values are much lower than the theoretical values. To achieve macroscopic fibers with ultrahigh performance, we developed a method to form multidimensional nanostructures by coalescence of individual nanotubes. The highly aligned wet-spun fibers of single- or double-walled nanotube bundles were graphitized to induce nanotube collapse and multi-inner walled structures. These advanced nanostructures formed a network of interconnected, close-packed graphitic domains. Their near-perfect alignment and high longitudinal crystallinity that increased the shear strength between CNTs while retaining notable flexibility. The resulting fibers have an exceptional combination of high tensile strength (6.57 GPa), modulus (629 GPa), thermal conductivity (482 W/m·K), and electrical conductivity (2.2 MS/m), thereby overcoming the limits associated with conventional synthetic fibers.

Smart wearable electronic accessories (e.g., watches) have found wide adoption; conversely, progress in electronic textiles has been slow due to the difficulty of embedding rigid electronic materials into flexible fabrics. Electronic clothing requires fibers that are conductive, robust, biocompatible, and can be produced on a large scale. Here, we create sewable electrodes and signal transmission wires from neat carbon nanotube threads (CNTT). These threads are soft like standard sewing thread, but they have metal-level conductivity and low interfacial impedance with skin. Electrocardiograms (EKGs) obtained by CNTT electrodes were comparable (P > 0.05) to signals obtained with commercial electrodes. CNTT can also be used as transmission wires to carry signals to other parts of a garment. Finally, the textiles can be machine-washed and stretched repeatedly without signal degradation. These results demonstrate promise for textile sensors and electronic fabric with the feel of standard clothing that can be incorporated with traditional clothing manufacturing techniques.

A monofilament fiber spun from individual carbon nanotubes is an arbitrarily long ensemble of weakly interacting, aligned, discrete nanoparticles. Despite the structural resemblance of carbon nanotube monofilament fibers to crystalline polymeric fibers, very little is known about their dynamic collective mechanics, which arise from van der Waals interactions among the individual carbon nanotubes. Using ultrafast stroboscopic microscopy, we study the collective dynamics of carbon nanotube fibers and compare them directly with nylon, Kevlar, and aluminum monofilament fibers under the same supersonic impact conditions. The in situ dynamics and kinetic parameters of the fibers show that the kinetic energy absorption characteristics of the carbon nanotube fibers surpass all other fibers. This study provides insight into the strain-rate-dependent strengthening mechanics of an ensemble of nanomaterials for the development of high-performance fibers used in body armor and other protective nanomaterials possessing exceptional stability in various harsh environments.

The remarkable flexibility, stable chemical structure, and extraordinary thermal, electrical, and optical properties of carbon nanotubes (CNTs) are promising for a variety of applications in flexible and/or high-temperature electronics, optoelectronics, and thermoelectrics, including wearables, refractory photonics, and waste heat harvesting. However, the long-standing problem in the preparation of CNT ensembles is to maintain the extraordinary properties of individual CNTs on a macroscopic scale; the polydispersity and randomness remain two main challenges. In this topical review, we will discuss three ways of creating wafer-scale aligned CNTs: direct growth of aligned CNTs by chemical vapor deposition, production of ultrahighconductivity CNT fibers through solution spinning and coating, and spontaneous formation of wafer-scale aligned CNT films via controlled vacuum filtration. We will then describe flexible and high-temperature applications of these materials, such as flexible CNT broadband detectors, flexible strain sensors, spectrally selective thermal emitters, and thermoelectric devices.

Active fibers with electro-optic functionalities are promising building blocks for the emerging and rapidly growing field of fiber and textile electronics. Yet, there remains significant challenges that require improved understanding of the principles of active fiber assembly to enable the development of fiber-shaped devices characterized by having a small diameter, being lightweight, and having high mechanical strength. To this end, the current frameworks are insufficient, and new designs and fabrication approaches are essential to accommodate this unconventional form factor. Here, we present a first demonstration of a pathway that effectively integrates the foundational components meeting such requirements, with the use of a flexible and robust conductive core carbon nanotube fiber and an organic–inorganic emissive composite layer as the two critical elements. We introduce an active fiber design that can be realized through an all solution-processed approach. We have implemented this technique to demonstrate a three-layered light-emitting fiber with a coaxially coated design.

No abstract