Cavity optomechanics has recently emerged as a new paradigm enabling the manipulation of mechanical motion via optical fields tightly confined in deformable cavities. When driving an optomechanical (OM) crystal cavity with a laser blue-detuned with respect to the optical resonance, the mechanical motion is amplified, ultimately resulting in phonon lasing at MHz and even GHz frequencies. In this work, we show that a silicon OM crystal cavity performs as an OM microwave oscillator when pumped above the threshold for self-sustained OM oscillations. To this end, we use an OM cavity designed to have a breathing-like mechanical mode at 3.897 GHz in a full phononic bandgap. Our measurements show that the first harmonic of the detected signal displays a phase noise of ≈−100 dBc/Hz at 100 kHz. Stronger blue-detuned driving leads eventually to the formation of an OM frequency comb, whose lines are spaced by the mechanical frequency. We also measure the phase noise for higher-order harmonics and show that, unlike in Brillouin oscillators, the noise is increased as corresponding to classical harmonic mixing. Finally, we present real-time measurements of the comb waveform and show that it can be fitted to a theoretical model recently presented. Our results suggest that silicon OM cavities could be relevant processing elements in microwave photonics and optical RF processing, in particular in disciplines requiring low weight, compactness and fiber interconnection.
Silicon on insulator photonics has offered a versatile platform for the recent development of integrated optomechanical circuits. However, there are some constraints such as the high cost of the wafers and limitation to a single physical device level. In the present work we investigate nanocrystalline silicon as an alternative material for optomechanical devices. In particular, we demonstrate that optomechanical crystal cavities fabricated of nanocrystalline silicon have optical and mechanical properties enabling non-linear dynamical behaviour and effects such as thermo-optic/free-carrier-dispersion self-pulsing, phonon lasing and chaos, all at low input laser power and with typical frequencies as high as 0.3 GHz.
Dynamical radiation pressure effects in cavity optomechanical systems give rise to self-sustained oscillations or 'phonon lasing' behavior, producing stable oscillators up to GHz frequencies in nanoscale devices. Like in photonic lasers, phonon lasing normally occurs in a single mechanical mode. We show here that phaselocked, multi-mode phonon lasing can be established in a multimode optomechanical system through Floquet dynamics induced by a temporally modulated laser drive. We demonstrate this concept in a suitably engineered silicon photonic nanocavity coupled to multiple GHz-frequency mechanical modes. We find that the long-term frequency stability is significantly improved in the multi-mode lasing state as a result of the phase locking.is it clear that we can claim it is a result of phase locking?These results provide a path towards highly stable ultra-compact oscillators, pulsed phonon lasing, coherent waveform synthesis, and emergent many-mode phenomena in oscillator arrays.
Conditioning of a metal structure in a high-voltage system is the progressive development of resistance to vacuum arcing over the operational life of the system. This is, for instance, seen during the initial operation of radio frequency (rf) cavities in particle accelerators. It is a relevant topic for any technology where breakdown limits performance, and where conditioning continues for a significant duration of system runtime. Projected future linear accelerators require structures with accelerating gradients of up to 100 MV/m. Currently, this performance level is only achievable after a multi-month conditioning period. In this work, a pulsed DC system applying voltage pulses over parallel disk electrodes was used to study the conditioning process, with the objective of obtaining insight into its underlying mechanics, and ultimately, to find ways to shorten the conditioning process. Two kinds of copper electrodes were tested: As-prepared machine-turned electrodes ("hard" copper), and electrodes that additionally had been subjected to high temperature treatments ("soft" copper). The conditioning behaviour of the soft electrodes was found to be similar to that of comparably treated accelerating structures, indicating a similar conditioning process. The hard electrodes reached the same ultimate performance as the soft electrodes much faster, with a difference of more than an order of magnitude in the number of applied voltage pulses. Two distinctly different distributions of breakdown locations were observed on the two types of electrodes. Considered together, our results support the crystal structure dislocation theory of breakdown, and suggest that the conditioning of copper in high field systems such as rf accelerating structures is dominated by material hardening.
Strong acousto-optic interaction in high-index waveguides and cavities generally requires the releasing of the high-index core to avoid mechanical leakage into the underlying low-index substrate. This complicates fabrication, limits thermalization, reduces the mechanical robustness, and hinders largearea optomechanical devices on a single chip. Here, we overcome this limitation by employing vertical photonic-phononic engineering to drastically reduce mechanical leakage into the cladding by adding a pedestal with specific properties between the core and the cladding. We apply this concept to a siliconbased platform, due to the remarkable properties of silicon to enhance optomechanical interactions and the technological relevance of silicon devices in multiple applications. Specifically, the insertion of a thick silicon nitride layer between the silicon guiding core and the silica substrate contributes to reducing gigahertz-frequency phonon leakage while enabling large values of the Brillouin gain in an unreleased platform. We numerically obtain values of the Brillouin gain around 300 (W m) −1 for different configurations, which could be further increased by operation at cryogenic temperatures. These values should enable Brillouin-related phenomena in centimeter-scale waveguides or in more compact ring resonators. Our findings could pave the way toward large-area unreleased-cavity and waveguide optomechanics on silicon and other high-index photonic technologies.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.