Hydrogels are widely used as in vitro culture models to mimic 3D cellular microenvironments. The stiffness of the extracellular matrix is known to influence cell phenotype, inspiring work toward unraveling the role of stiffness on cell behavior using hydrogels. However, in many biological processes such as embryonic development, wound healing, and tumorigenesis, the microenvironment is highly dynamic, leading to changes in matrix stiffness over a broad range of timescales. To recapitulate dynamic microenvironments, a hydrogel with temporally tunable stiffness is needed. Here, we present a system in which alginate gel stiffness can be temporally modulated by light-triggered release of calcium or a chelator from liposomes. Others have shown softening via photodegradation or stiffening via secondary cross-linking; however, our system is capable of both dynamic stiffening and softening. Dynamic modulation of stiffness can be induced at least 14 d after gelation and can be spatially controlled to produce gradients and patterns. We use this system to investigate the regulation of fibroblast morphology by stiffness in both nondegradable gels and gels with degradable elements. Interestingly, stiffening inhibits fibroblast spreading through either mesenchymal or amoeboid migration modes. We demonstrate this technology can be translated in vivo by using deeply penetrating near-infrared light for transdermal stiffness modulation, enabling external control of gel stiffness. Temporal modulation of hydrogel stiffness is a powerful tool that will enable investigation of the role that dynamic microenvironments play in biological processes both in vitro and in well-controlled in vivo experiments.hydrogel | dynamic microenvironment | cell spreading | transdermal

Longitudinal monitoring of cells is required in order to understand the role of delivered stem cells in therapeutic neovascularization. However, there is not an imaging technique that is capable of quantitative, longitudinal assessment of stem cell behaviors with high spatial resolution and sufficient penetration depth. In this study, in vivo and in vitro experiments were performed to demonstrate the efficacy of ultrasound-guided photoacoustic (US/PA) imaging to monitor mesenchymal stem cells (MSCs) labeled with gold nanotracers (Au NTs). The Au NT labeled MSCs, injected intramuscularly in the lower limb of the Lewis rat, were detected and spatially resolved. Furthermore, our quantitative in vitro cell studies indicate that US/PA imaging is capable of high detection sensitivity (1×104 cells/mL) of the Au NT labeled MSCs. Finally, Au NT labeled MSCs captured in the PEGylated fibrin gel system were imaged in vivo, as well as in vitro, over a one week time period, suggesting that longitudinal cell tracking using US/PA imaging is possible. Overall, Au NT labeling of MSCs and US/PA imaging can be an alternative approach in stem cell imaging capable of noninvasive, sensitive, quantitative, longitudinal assessment of stem cell behaviors with high spatial and temporal resolutions at sufficient depths.

Skeletal muscle injury resulting in tissue loss poses unique challenges for surgical repair. Despite the regenerative potential of skeletal muscle, if a significant amount of tissue is lost, skeletal myofibers will not grow to fill the injured area completely. Prior work in our lab has shown the potential to fill the void with an extracellular matrix (ECM) scaffold, resulting in restoration of morphology, but not functional recovery. To improve the functional outcome of the injured muscle, a muscle-derived ECM was implanted into a 1 x 1 cm(2), full-thickness defect in the lateral gastrocnemius (LGAS) of Lewis rats. Seven days later, bone-marrow-derived mesenchymal stem cells (MSCs) were injected directly into the implanted ECM. Partial functional recovery occurred over the course of 42 days when the LGAS was repaired with an MSC-seeded ECM producing 85.4 +/- 3.6% of the contralateral LGAS. This was significantly higher than earlier recovery time points (p < 0.05). The specific tension returned to 94 +/- 9% of the contralateral limb. The implanted MSC-seeded ECM had more blood vessels and regenerating skeletal myofibers than the ECM without cells (p < 0.05). The data suggest that the repair of a skeletal muscle defect injury by the implantation of a muscle-derived ECM seeded with MSCs can improve functional recovery after 42 days.

The loss of a portion of skeletal muscle poses a unique challenge for the normal regeneration of muscle tissue. A transection injury with tissue loss will not heal due to the gap between muscle segments. A damage model was developed by removing a portion of the lateral gastrocnemius (GAS) of Sprague-Dawley rats. Maximal isometric, tetanic tension (P(o)) was measured after the removal of either a small defect (0.5 x 1.0 cm) or a large defect (1.0 x 1.0 cm) piece of the GAS. In situ P(o) immediately after creation of the defect was 88.3 +/- 2.0% of the nonoperated contralateral GAS force for small defect and 76.9 +/- 3.2% of control for large defect. No functional recovery occurred in either group over the course of 28 days. To enhance recovery, a homologous, decellularized, muscle extracellular matrix (ECM) was implanted into the 1 x 1 cm defect of the lateral GAS of Lewis rats. After 42 days, growth of blood vessels and myofibers into the ECM was apparent, but no restoration of P(o) occurred. These data demonstrate the ability of the ECM to support muscle and blood vessel regeneration, but full recovery of function does not occur after 42 days.

Three-dimensional bioprinting is an innovative technique in tissue engineering, to create layer-by-layer structures, required for mimicking body tissues. However, synthetic bioinks do not generally possess high printability and biocompatibility at the same time. So, there is an urgent need for naturally derived bioinks that can exhibit such optimized properties. We used furfuryl-gelatin as a novel, visible-light crosslinkable bioink for fabricating cell-laden structures with high viability. Hyaluronic acid was added as a viscosity enhancer and either Rose Bengal or Riboflavin was used as a visible-light crosslinker. Crosslinking was done by exposing the printed structure for 2.5 min to visible light and confirmed using Fourier transform infrared spectroscopy and rheometry. Scanning electron microscopy revealed a highly porous networked structure. Three different cell types were successfully bioprinted within these constructs. Mouse mesenchymal stem cells printed within monolayer and bilayer sheets showed viability, network formation and proliferation (∼5.33 times) within 72 h of culture. C2C12 and STO cells were used to print a double layered structure, which showed evidence of the viability of both cells and heterocellular clusters within the construct. This furfuryl-gelatin based bioink can be used for tissue engineering of complex tissues and help in understanding how cellular crosstalk happens in vivo during normal or diseased pathology. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2018.

Stromal-derived factor 1alpha (SDF-1alpha) is a key stem cell homing factor that is crucial for mobilization of stem cells from bone marrow to peripheral blood and subsequent engraftment to the tissue of diseased organs. It has been reported that SDF-1alpha is transiently over-expressed in ischemic myocardium. Therefore, there may be a limited time window after acute myocardial infarction (AMI) during which stem cells are recruited to injured myocardium for repair. This study aimed at investigating whether controlled release of SDF-1alpha via a novel conjugated poly(ethylene glycol) (PEG) (PEGylated) fibrin patch at the infarct site would increase the rate of stem cell recruitment and offer potential therapeutic benefits. Recombinant mouse SDF-1alpha was covalently bound to the PEGylated fibrinogen as evidenced by immunoprecipitation and western blotting. The PEGylated fibrinogen, bound with recombinant mouse SDF-1alpha, was mixed with thrombin to form the PEGylated fibrin patch. The release kinetics of SDF-1alpha were detected in vitro using enzyme-linked immunosorbent assay. Using a mouse AMI model produced by a ligature on the left anterior descending coronary artery, a PEGylated fibrin patch bound with SDF-1alpha (100 ng) was placed on the surface of the infarct area of the left ventricle. Infarct size, left ventricular (LV) function, and the percentage of sca-1(+)/c-kit(+) cells within the infarct area were measured at days 7, 14, and 28 after AMI. In vitro results showed that SDF-1alpha was successfully bound to the PEGylated fibrin patch and can be released from the patch constantly for up to 10 days. Two weeks after infarction, the myocardial recruitment of c-kit(+) cells was significantly higher in the group treated with the SDF-1alpha PEGylated fibrin patch (n = 9) than in the AMI control group (n = 10) (p < 0.05; 11.20 +/- 1.71% vs. 4.22 +/- 0.96%, respectively). At day 28 post-AMI, unlike the control group, the group with the SDF-1alpha-releasing patch maintained stable release of SDF-1alpha concurrent with additional stem cell homing. Moreover, LV function was significantly better than in the control group. These data demonstrate that the PEGylated fibrin patch based SDF-1alpha delivery can improve the rate of c-kit(+) cell homing and improve LV function in hearts with postinfarction LV remodeling.

Background: Stem cells can differentiate into multiple cell types, and therefore can be used for cellular therapies, including tissue repair. However, the participation of stem cells in tissue repair and neovascularization is not well understood. Therefore, implementing a noninvasive, long-term imaging technique to track stem cells in vivo is needed to obtain a better understanding of the wound healing response. Generally, we are interested in developing an imaging approach to track mesenchymal stem cells (MSCs) in vivo after delivery via a polyethylene glycol modified fibrin matrix (PEGylated fibrin matrix) using MSCs loaded with gold nanoparticles as nanotracers. The objective of the current study was to assess the effects of loading MSCs with gold nanoparticles on cellular function. Methods: In this study, we utilized various gold nanoparticle formulations by varying size and surface coatings and assessed the efficiency of cell labeling using darkfield microscopy. We hypothesized that loading cells with gold nanotracers would not significantly alter cell function due to the inert and biocompatible characteristics of gold. The effect of nanoparticle loading on cell viability and cytotoxicity was analyzed using a LIVE/DEAD stain and an MTT assay. The ability of MSCs to differentiate into adipocytes and osteocytes after nanoparticle loading was also examined. In addition, nanoparticle loading and retention over time was assessed using inductively coupled plasma mass spectrometry (ICP-MS). Conclusion: Our results demonstrate that loading MSCs with gold nanotracers does not alter cell function and, based on the ICP-MS results, long-term imaging and tracking of MSCs is feasible. These findings strengthen the possibility of imaging MSCs in vivo, such as with optical or photoacoustic imaging, to understand better the participation and role of MSCs in neovascularization.

We have investigated the self-assembly of fluorenylmethoxycarbonyl-conjugated dialanine (Fmoc-AA) molecules using combined computational and experimental approaches. Fmoc-AA gels were characterized using TEM, circular dichroism, FTIR, and WAXS. Computationally, we simulated the assembly of Fmoc-AA using molecular dynamics techniques. All simulations converged to a condensed fibril structure in which the Fmoc groups stack mostly within in the center of the fibril. However, the Fmoc groups are partially exposed to water, creating an amphiphilic surface, which may be responsible for aggregation of fibrils into nano-scale fibers observed in TEM. From the fibril models, radial distribution calculations agree with d-spacings observed in WAXS for the fibril diameter and π-stacking interactions. Our analyses show that dialanine, despite its short length, adopts a mainly extended polyproline II conformation. In contrast to previous hypotheses, these results indicate that β-sheet-like hydrogen bonding is not prevalent. Rather, stacking of Fmoc groups, inter-residue hydrogen bonding and hydrogen bonding with water play the important roles in stabilizing the fibril structure of supramolecular assemblies of short conjugated peptides.