The article presents the results of measurements of the ambient temperature around the working cylindrical grinding machines during the working day. The analysis of the behavior of the grinding head spindle of different cylindrical grinding machines during the work shift is performed, namely the results of experimental studies of the displacement of the front and rear ends of the grinding head spindle of cylindrical grinding machines are presented. The analysis of influence of temperature of working fluids in spindle bearings on its displacement is carried out. Possible changes in the geometric shape, namely, conicity, of parts machined on cylindrical grinding machines have been established.
The proposed scientific work considers and substantiates an effective method for selecting interference fit on smooth cylindrical surfaces of parts, which can be successfully applied in automated design of fit. Based on the analysis of numerical and analytical research of the results of calculation and design of the considered joints, a flat image of a mathematical model of the area of existence of geometric parameter values in a two-dimensional coordinate system (diameter and working length of the fit) was first obtained. At the next stage of modeling many alternative i-th standard interference fits were built. Within each i-th object centers of grouping rational values of geometric parameters were defined. They are formed by crossing the largest segments of allowable ranges of changing values of diameter and working length in each of the models of sets. The position of such centers is analytically described using the mathematical apparatus of the theory of R-functions. On the considered specific example of this research, the criterion for choosing a rational standard interference fit is formulated depending on the values of geometric parameters. The meaning of this criterion is that within the flat geometric image of the model, the shortest distance is analytically determined - the segment between the points of the grouping centers of the model of set of the �-th fit and the model of the area of existence of values. The effectiveness and advisability of the formulated criterion is illustrated by comparison with other criterions obtained in previous researches of the authors. As a result of the research, it was revealed that the task of choosing a single rational design solution is significantly simplified if several criterions of one of the alternative fits coincide.
Experimental studies of the temperature of the working fluid in the spindle bearings of the grinding head of circular grinding machines of different models have been performed. The conditions of the performed experimental researches are described. The influence of ambient temperature and design parameters of grinding head parts on the change of working fluid temperature in the front and rear spindle bearings is considered. It is experimentally proven that the difference in fluid temperatures in the front and rear bearings depends on the operating time of the machine. The time interval of machine operation when thermal equilibrium occurs is set.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.