The need of light weight alloys for future transportation industry puts Sc and Ti under a sudden demand. While these metals can bring unique and desired properties to alloys, lack of reliable sources brought forth a supply problem which can be solved by valorization of the secondary resources. Bauxite residue (red mud), with considerable Ti and Sc content, is a promising resource for secure supply of these metals. Due to drawbacks of the direct leaching route from bauxite residue, such as silica gel formation and low selectivity towards these valuable metals, a novel leaching process based on oxidative leaching conditions, aiming more efficient and selective leaching but also considering environmental aspects via lower acid consumption, was investigated in this study. Combination of hydrogen peroxide (H2O2) and sulfuric acid (H2SO4) was utilized as the leaching solution, where various acid concentrations, solid-to-liquid ratios, leaching temperatures and times were examined in a comparative manner. Leaching with 2.5 M H2O2: 2.5 M H2SO4 mixture at 90 °C for 30 min was observed to be the best leaching conditions with suppressed silica gel formation and the highest reported leaching efficiency with high S/L ratio for Sc and Ti; 68% and 91%; respectively.

Due to its alkalinity, red mud produced by the Bayer process may affect both the environment and human health. For this reason, its further utilization instead of disposal is of great importance. Numerous methods have already been studied for hydrometallurgical treatment of red mud, especially for the recovery of various metallic components such as iron, aluminum, titanium or rare earth elements. This study focuses on the extraction of titanium from red mud and in particular the mineralogical changes, induced by leaching. Sulfuric acid, hydrochloric acid and their combination have been utilized as leaching agents with the same leaching parameters. It has been determined that sulfuric acid is the best candidate for the red mud treatment in terms of titanium leaching efficiency at the end of 2 h with a value of 67.3%. Moreover, samples from intermediate times of reaction revealed that leaching of Ti exhibit various reaction rates at different times of reaction depending on acid type. In order to explain differences, X-ray Diffraction (XRD), scanning electron microscope (SEM) and QEMSCAN techniques were utilized. Beside titanium oxide (TiO 2 ) with available free surface area, a certain amount of the TiO 2 was detected as entrapped in Fe dominating oxide. These associations between Ti and Fe phases were used to explain different leaching reaction rates and a reaction mechanism was proposed to open a process window.

Quartz cementation in sandstones is closely linked to grain coating phases and diagenetic alteration. Grain coatings consisting of illite smectite stained with iron oxides and hydroxides are able to preserve large amounts of porosity by preventing the formation of syntaxial quartz overgrowth cement. The Penrith Sandstone Formation was chosen as an analogue for Rotliegend reservoirs to test the impact of grain coatings on quartz cementation. This adds to an existing model of cementation. Differences of grain coating coverage can be linked to grain size. Extensive grain coatings are present in finer grained laminae in some samples. Coarser grained laminae contain less extensive grain coatings. The analysis of grain coatings based on standard petrographic analyses is combined with high resolution QEMSCAN® analyses. Structural features include deformation bands of different ages. Diagenetic alterations around faults, recorded by grain coatings, allow the delineation of relative temporal relations, revealing at least two generations of deformation band formation associated with normal faulting. In the Vale of Eden succession one normal faulting event postdates burial diagenetic quartz cementation as is evident by fault focused fluid flow and associated bleaching of iron and absence of quartz overgrowth. Repository KITopenDies ist ein Postprint/begutachtetes Manuskript.

No abstract

No abstract