Fluidization characteristics such as the minimum fluidization velocity and the bed pressure drop are important for the design of an efficient fluidized bed. These characteristics can be measured experimentally, but also modelled by CFD simulations. The aim of this study was to use experimental data to validate drag models applied in the CFD software Barracuda.Most of the drag models available in the literature are validated against Geldart B or D particles and are not necessarily suitable for Geldart A particles, such as the zirconia particles used in the present study. However, by adjusting one of the constants in the Wen-Yu and Ergun drag models, it should be possible to apply these equations also for Geldart A particles.Data from an in-house built lab-scale fluidized bed unit were used in the study. Reducing the k1 value in the drag model from 180 to 47 gave a reasonable representation of the minimum fluidization velocity and the pressure drop over the bed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.