Fibre-reinforced composites are rapidly gaining market share in structural applications, but further growth is limited by their lack of toughness. Fibre hybridisation is a promising strategy to toughen composite materials. By combining two or more fibre types, these hybrid composites offer a better balance in mechanical properties than non-hybrid composites. Predicting their mechanical properties is challenging due to the synergistic effects between both fibres. This review aims to explain basic mechanisms of these hybrid effects and describes the state-of-the-art models to predict them. An overview of the tensile, flexural, impact and fatigue properties of hybrid composites is presented to aid in optimal design of hybrid composites. Finally, some current trends in fibre hybridisation, such as pseudoductility, are described.

Voids, the most studied type of manufacturing defects, form very often in processing of fiber-reinforced composites. Due to their considerable influence on physical and thermomechanical properties of composites, they have been extensively studied, with the focus on three research tracks: void formation, characteristics, and mechanical effects. Investigation of voids in composites started around half a century ago and is still an active research field in composites community. This is because of remaining unknowns and uncertainties about voids as well as difficulties in their suppression in modern manufacturing techniques like out-of-autoclave curing and parts with high complexity, further complicated by increased viscosity of modified resins. Finally, this is because of the increasing interest in realization of more accurate void rejection limits that would tolerate some voidage. The current study reviews the research on formation, characterization, and mechanical effects of voids, which has been conducted over the past five decades. Investigation and control of void formation, using experimental and modeling approaches, in liquid composite molding as well as in prepreg composite processing are surveyed. Techniques for void characterization with their advantages and disadvantages are described. Finally, the effect of voids on a broad range of mechanical properties, including inter-laminar shear, tensile, compressive, and flexural strength as well as fracture toughness and fatigue life, is appraised. Both experimental and simulation approaches and results, concerning voids' effects, are reviewed.

No abstract

No abstract

Abstract:Natural fibres are studied as alternatives for man-made fibres to reinforce composites while keeping the weight lower. The assessment of the value of some commonly available tropical fibres for the composite industry starts with the determination of the strength, E-modulus and strain to failure through single fibre tensile tests. The mean strength and standard deviation is calculated following the normal and Weibull distribution resulting in the questionable benefit of applying the Weibull distribution. Furthermore, a correction method assesses the real fibre elongation from the measured clamp displacement. This procedure seems to be useful for strong, brittle fibres to produce more reliable results for the E-modulus and strain to failure.

No abstract

No abstract

No abstract