This article covers the introduction to polymer composites, phenol formaldehyde resin, phenol formaldehyde composites, and foams along with their properties and applications. The previous research in the fields of phenol formaldehyde composites, nanocomposites, and PF foams is also covered in depth. Various combinations of nanomaterials and processes have been investigated in the field of structural composites to meet the requirements of industries such as automotive, aerospace, military, civil, and construction. Due to their different features and possibilities when compared to equivalents composed of other polymers, particularly thermosets, phenol-formaldehyde reinforced composites are commonly used for large load bearing structural applications. Composite properties can be improved by using nanoparticles, which are materials that have been developed as a result of advances in nanotechnology. This research focuses on a literature review of nanofillers' use to improve the structural properties of phenol-formaldehyde composites and foams published in the last two decades. The use of nanomaterials to modify composites is examined in depth.
Phenol-formaldehyde resin is an inevitable polymer material because of their excellent properties like heat resistance, chemical resistance, creep resistance, and low water sorption. But the drawback associated with PF matrix is buckling and brittleness. The incorporation of nanofillers can effectively reduce these problems. Carbon nanotubes is one among the nanofiller which is widely used to enhance the mechanical, thermal, electrical properties of the host matrix.The present study deals with the synthesis and comparison of two Phenol-formaldehyde nanocomposites incorporated with pristine multiwalled carbon nanotubes and carboxylated multiwalled carbon nanotubes via in-situ polymerisation technique. The effect of filler loading (MWCNT, MWCNT-COOH) with different weight percentages (0.05 wt%, 0.08 wt%, 0.12 wt%, 0.15 wt%) has been investigated in this study. Pristine MWCNT was functionalised with carboxyl groups and confirmed by XRD, FT-IR, CHN analysis, X-ray photoelectron spectroscopy, AFM and Raman spectra. All these analysis showed successful funtionalisation of pure MWCNT. The prepared nanocomposites were compared by mechanical, thermal and morphological analysis. The effect of both fillers on tensile strength, stress-strain, young’s modulus and elongation at break were also analysed. The addition of MWCNT and MWCNT-COOH have enhanced the mechanical and thermal properties of the prepared nanocomposite. The mechanical properties of PF-MWCNT nanocomposite showed a maxima for 0.12 wt% and for PF-MWCNTCOOH nanocomposite it was 0.08 wt%. Higher thermal stability was exhibited for 0.15 wt% MWCNT loading. The thermal stability enhanced by the addition of MWCNT COOH upto 0.12 wt% and then declined. Moreover the prepared nanocomposites were morphologically characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM) and from the fracture analysis it is clear that the reinforcements brought plastic deformation of phenol-formaldehyde nanocomposite from brittle to more ductile material. From the TEM image it was clear that the presence of carboxyl groups attached on MWCNT reduced agglomeration in PF matrix. Halpin-Tsai modelling was done for comparing experimental and theoretical values of tensile modulus and it illustrates good correlation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.