The international Muon Ionization Cooling Experiment (MICE), which is under construction at the Rutherford Appleton Laboratory (RAL), will demonstrate the principle of ionization cooling as a technique for the reduction of the phase-space volume occupied by a muon beam. Ionization cooling channels are required for the Neutrino Factory and the Muon Collider. MICE will evaluate in detail the performance of a single lattice cell of the Feasibility Study 2 cooling channel. The MICE Muon Beam has been constructed at the ISIS synchrotron at RAL, and in MICE Step I, it has been characterized using the MICE beam-instrumentation system. In this paper, the MICE Muon Beam and beam-line instrumentation are described. The muon rate is presented as a function of the beam loss generated by the MICE target dipping into the ISIS proton beam. For a 1 V signal from the ISIS beam-loss monitors downstream of our target we obtain a 30 KHz instantaneous muon rate, with a neglible pion contamination in the beam.
Abstract-The RF coupling coil (RFCC) module of MICE is where muons that have been cooled within the MICE absorber focus (AFC) modules are re-accelerated to their original longitudinal momentum. The RFCC module consists of four 201.25 MHz RF cavities in a 1.4 meter diameter vacuum vessel. The muons are kept within the RF cavities by the magnetic field generated by a superconducting coupling solenoid that goes around the RF cavities. The coupling solenoid will be cooled using a pair of 4 K pulse tube cooler that will generate 1.5 W of cooling at 4.2 K. The magnet will be powered using a 300 A twoquadrant power supply. This report describes the ICST engineering design of the coupling solenoid for MICE.
Abstract-The MICE cooling channel consists of alternating three absorber focus coil module (AFC) and two RF coupling coil module (RFCC) where the process of muon cooling and reacceleration occurs. The RFCC module comprises a superconducting coupling solenoid mounted around four conventional conducting 201.25 MHz closed RF cavities and producing up to 2.2T magnetic field on the centerline. The coupling coil magnetic field is to produce a low muon beam beta function in order to keep the beam within the RF cavities. The magnet is to be built using commercial niobium titanium MRI conductors and cooled by pulse tube coolers that produce 1.5 W of cooling capacity at 4.2 K each. A self-centering support system is applied for the coupling magnet cold mass support, which is designed to carry a longitudinal force up to 500 kN. This report will describe the updated design for the MICE coupling magnet. The cold mass support system and helium cooling system are discussed in detail.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.