a b s t r a c tThe motion of a large object in a bubbling fluidized bed was experimentally studied using digital image analysis (DIA). The experiments were performed in a 2 D bubbling fluidized bed with glass spheres as bed material. The object motion was measured using non intrusive tracking techniques, while independent measurements of the dense phase velocity (using Particle Image Velocimetry (PIV)) and bubble velocity (using DIA) were carried out. The effect of the dimensionless gas velocity on the object motion was also analyzed.This work characterizes the circulation patterns of an object with a density similar to that of the bed, but much larger in size. Object size and density remained constant throughout the experiments. A comparison between the motion of sinking objects and the motion of the dense phase provided evidence of the feeble effect of buoyant forces on the motion of sinking objects. In contrast, the motion of rising objects is linked to the motion of bubbles. It was found that objects may be raised to the surface of the bed either by the action of a single bubble (one jump) or by several passing bubbles (multiple jumps). Based on these results, the circulation time of objects throughout the bed is a function of two parameters: the maximum depth attained by an object and the number of jumps during its rising path. This relationship is presented along and the multiple jumps phenomenon is studied in detail. Finally, an estimate of the circulation time of an object based on semi empirical expressions is presented for different dimensionless gas velocities. The probability density function of the circulation time shows two different modes as the object was less prone to be raised at moderate depths. The estimate of the circulation time was found to be in good agreement with our experimental data.

a b s t r a c tThe effect of buoyant forces on the motion of a large object immersed in a bubbling fluidized bed (BFB) was experimentally studied using digital image analysis. The experiments were performed in a 2 D bubbling fluidized bed with glass spheres as bed material and cylindrical objects with different densities and sizes. The object motion was measured using non intrusive tracking techniques. The effect of gas velocity was also analyzed.The circulation of an object in a BFB is defined by several parameters. The object might be able to circulate homogeneously throughout the bed or stay in preferred regions, such as the splash zone or the bottom zone. While circulating, the object moves back and forth between the surface of the bed and the inner regions, performing a series of cycles. Each cycle is composed by sinking and rising paths, which can be one or several, depending on whether a passing bubble is able to lift the object to the surface or the object is detached from it or its drift at an intermediate depth. Therefore, the number of rising paths or number of jumps that the object undergo in a cycle, interleaved with sinking paths, and the maximum attained depth characterize each cycle, together with the mean sinking and rising velocities of the object. In this work, experimental measurements of the probability distributions of the number of jumps and the maximum attained depth, the axial homogeneity of object motion and rising and sinking object velocities are presented for objects with different sizes and densities. The results show a coherent behavior, independent of density and size, for the probability distributions of the number of jumps. This is also true for the maximum attained depth, but only when a proper circulation throughout the bed is ensured. Such a proper circulation and axial homogeneity is, on the other hand, much affected by object density, size and gas velocity. Rising and sinking velocities are highly dependent on gas velocity, as established in well known models of bubble and dense phase velocities. Nevertheless, rising velocities are practically unaffected by object density or size, while sinking velocities show a low dependence on density and a steeper one on size. These results suggest that buoyant forces are relevant during the sinking process, and almost neutral during the rising path.

Abstract:The thermal decomposition of biomass (pine pellets) and sewage sludge was studied using thermogravi metric analysis under an inert atmosphere and the Distributed Activation Energy Model (DAEM) was employed. The activation energy and the frequency factor that characterize the kinetics were determined for both samples. A simplification of the process for prediction of devolatilization curves was proposed, evaluating its validity for both cases. The simplified method was found to combine both simplicity and low deviations with experimental data.

No abstract

N. (2017). Pyrolysis of sewage sludge in a fixed and a bubbling fluidized bed -Estimation and experimental validation of the pyrolysis time.