Solid-state electrolytes based on ionic liquids and a gelling matrix are promising for rechargeable lithiumion batteries due to their safety under diverse operating conditions, favorable electrochemical and thermal properties, and wide processing compatibility. However, gel electrolytes also suffer from low mechanical moduli, which imply poor structural integrity and thus an enhanced probability of electrical shorting, particularly under conditions that are favorable for lithium dendrite growth. Here, we realize high-modulus, ion-conductive gel electrolytes based on imidazolium ionic liquids and exfoliated hexagonal boron nitride (hBN) nanoplatelets. Compared to conventional bulk hBN microparticles, exfoliated hBN nanoplatelets improve the mechanical properties of gel electrolytes by 2 orders of magnitude (shear storage modulus ∼5 MPa), while retaining high ionic conductivity at room temperature (>1 mS cm −1 ). Moreover, exfoliated hBN nanoplatelets are compatible with high-voltage cathodes (>5 V vs Li/Li + ) and impart exceptional thermal stability that allows high-rate operation of solid-state rechargeable lithium-ion batteries at temperatures up to 175 °C.
Background Various public health measures have been implemented globally to counter the coronavirus disease 2019 (COVID-19) pandemic. The purpose of this study was to evaluate respiratory virus surveillance data to determine the effectiveness of such interventions in reducing transmission of seasonal respiratory viruses. Method We retrospectively analysed data from the Respiratory Virus Detection Surveillance System in Canada, before and during the COVID-19 pandemic, by interrupted time series regression. Results The national level of infection with seasonal respiratory viruses, which generally does not necessitate quarantine or contact screening, was greatly reduced after Canada imposed physical distancing and other quarantine measures. The 2019–2020 influenza season ended earlier than it did in the previous year. The influenza virus was replaced by rhinovirus/enterovirus or parainfluenza virus in the previous year, with the overall test positivity remaining at approximately 35%. However, during the 2019–2020 post-influenza period, the overall test positivity of respiratory viruses during the COVID-19 was still low (7.2%). Moreover, the 2020–2021 influenza season had not occurred by the end of February 2021. Conclusion Respiratory virus surveillance data may provide real-world evidence of the effectiveness of implemented public health interventions during the current and future pandemics.
By preventing electrical contact between anode and cathode electrodes while promoting ionic transport, separators are critical components in the safe operation of rechargeable battery technologies. However, traditional polymer-based separators have limited thermal stability, which has contributed to catastrophic thermal runaway failure modes that have conspicuously plagued lithium-ion batteries. Here, we describe the development of phase-inversion composite separators based on carbon-coated hexagonal boron nitride (hBN) nanosheets and poly(vinylidene fluoride) (PVDF) polymers that possess high porosity, electrolyte wettability, and thermal stability. The carbon-coated hBN nanosheets are obtained through a scalable liquid-phase shear exfoliation method using ethyl cellulose as a polymer stabilizer and source of the carbon coating following thermal pyrolysis. When incorporated within the PVDF matrix, the carbon-coated hBN nanosheets promote favorable interfacial interactions during the phase-inversion process, resulting in porous, flexible, free-standing composite separators. The unique chemical composition of these carbon-coated hBN separators implies high wettability for a wide range of liquid electrolytes. This combination of high porosity and electrolyte wettability enables enhanced ionic conductivity and lithium-ion battery electrochemical performance that exceeds incumbent polyolefin separators over a wide range of operating conditions. The hBN nanosheets also impart high thermal stability, providing safe lithium-ion battery operation up to 120 °C.
To achieve the high energy densities demanded by emerging technologies, lithium battery electrodes need to approach the volumetric and specific capacity limits of their electrochemically active constituents, which requires minimization of the inactive components of the electrode. However, a reduction in the percentage of inactive conductive additives limits charge transport within the battery electrode, which results in compromised electrochemical performance. Here, we introduce an electrode design that achieves efficient electron and lithium-ion transport kinetics at exceptionally low conductive additive levels and industrially relevant active material areal loadings. Using a scalable Pickering emulsion approach, Ni-rich LiNi 0.8 Co 0.15 Al 0.05 O 2 cathode powders are conformally coated using only 0.5 wt% of solution-processed graphene, resulting in an electrical conductivity that is comparable to 5 wt% carbon black. Moreover, the conformal graphene coating mitigates degradation at the cathode surface, thus This article is protected by copyright. All rights reserved.3 providing improved electrochemical cycle life. The morphology of the electrodes also facilitates rapid lithium-ion transport kinetics, which provides superlative rate capability.Overall, this electrode design concurrently approaches theoretical volumetric and specific capacity limits without tradeoffs in cycle life, rate capability, or active material areal loading.
Layered, nickel-rich lithium transition metal oxides have emerged as leading candidates for lithium-ion battery (LIB) cathode materials. High-performance applications for nickel-rich cathodes, such as electric vehicles and grid-level energy storage, demand electrodes that deliver high power without compromising cell lifetimes or impedance. Nanoparticle-based nickel-rich cathodes seemingly present a solution to this challenge due to shorter lithium-ion diffusion lengths compared to incumbent micrometer-scale active material particles. However, since smaller particle sizes imply that surface effects become increasingly important, particle surface chemistry must be well characterized and controlled to achieve robust electrochemical properties. Moreover, residual surface impurities can disrupt commonly used carbon coating schemes, which result in compromised cell performance. Using x-ray photoelectron spectroscopy, here we present a detailed characterization of the surface chemistry of LiNi0.8Al0.15Co0.05O2 (NCA) nanoparticles, ultimately identifying surface impurities that limit LIB performance. With this chemical insight, annealing procedures are developed that minimize these surface impurities, thus improving electrochemical properties and enabling conformal graphene coatings that reduce cell impedance, maximize electrode packing density, and enhance cell lifetime fourfold. Overall, this work demonstrates that controlling and stabilizing surface chemistry enables the full potential of nanostructured nickel-rich cathodes to be realized in high-performance LIB technology.
Lithium nickel manganese cobalt oxides (NMCs) are promising cathode materials for high-performance lithium-ion batteries. Although these materials are commonly cycled within mild voltage windows (up to 4.3 V vs Li/Li + ), operation at high voltages (>4.7 V vs Li/Li + ) to access additional capacity is generally avoided due to severe interfacial and chemomechanical degradation. At these high potentials, NMC degradation is caused by exacerbated electrolyte decomposition reactions and non-uniform buildup of chemomechanical strains that result in particle fracture. By applying a conformal graphene coating on the surface of NMC primary particles, we find significant enhancements in the high-voltage cycle life and Coulombic efficiency upon electrochemical cycling. Postmortem X-ray diffraction, X-ray photoelectron spectroscopy, and electron microscopy suggest that the graphene coating mitigates electrolyte decomposition reactions and reduces particle fracture and electrochemical creep. We propose a relationship between the spatial uniformity of lithium flux and particle-level mechanical degradation and show that a conformal graphene coating is well-suited to address these issues. Overall, these results delineate a pathway for rationally mitigating high-voltage chemomechanical degradation of nickel-rich cathodes that can be applied to existing and emerging classes of battery materials.
As a Li-ion battery anode, Li 2 TiSiO 5 nanoparticles are conformally coated with graphene using a scalable ethyl cellulose-based solution process, which enables low overpotential and charge-transfer resistance, resulting in high rate performance with minimal risk for Li dendrite growth. Furthermore, the ethyl cellulose-based solution processing enables dense electrode packing and thus exceptionally high volumetric energy densities. With these advantages, graphenefunctionalized Li 2 TiSiO 5 shows significant potential as a next-generation Li-ion battery anode for high volumetric energy and power density applications.
In eusocial ants, aggressive behaviors require the ability to discriminate between chemical signatures such as cuticular hydrocarbons that distinguish nestmate friends from non-nestmate foes. It has been suggested that a mismatch between a chemical signature (label) and the internal, neuronal representation of the colony odor (template) leads to aggression between non-nestmates. Moreover, a definitive demonstration that odorant receptors are responsible for the processing of the chemical signals that regulate nestmate recognition has thus far been lacking. To address these issues, we have developed an aggression-based bioassay incorporating highly selective modulators that target odorant receptor functionality to characterize their role in nestmate recognition in the formicine ant Camponotus floridanus. Electrophysiological studies were used to show that exposure to either a volatilized antagonist or an agonist eliminated or dramatically altered signaling, respectively. Administration of these compounds to adult workers significantly reduced aggression between non-nestmates without altering aggression levels between nestmates. These studies provide direct evidence that odorant receptors are indeed necessary and sufficient for mediating aggression towards non-nestmates. Furthermore, our observations support a hypothesis in which rejection of non-nestmates depends on the precise decoding of chemical signatures present on non-nestmates as opposed to the absence of any information or the active acceptance of familiar signatures.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.