BackgroundImprovements in data processing, increased understanding of the biomechanical background behind kinetics and kinematics, and technological advancements in inertial measurement unit (IMU) sensors have enabled high precision in the measurement of joint angles and acceleration on human subjects. This has resulted in new devices that reportedly measure joint angles, arm speed, and stresses to the pitching arms of baseball players. This study seeks to validate one such sensor, the MotusBASEBALL unit, with a marker-based motion capture laboratory.HypothesisWe hypothesize that the joint angle measurements (“arm slot” and “shoulder rotation”) of the MotusBASEBALL device will hold a statistically significant level of reliability and accuracy, but that the “arm speed” and “stress” metrics will not be accurate due to limitations in IMU technology.MethodsA total of 10 healthy subjects threw five to seven fastballs followed by five to seven breaking pitches (slider or curveball) in the motion capture lab. Subjects wore retroreflective markers and the MotusBASEBALL sensor simultaneously.ResultsIt was found that the arm slot (R = 0.975, P < 0.001), shoulder rotation (R = 0.749, P < 0.001), and stress (R = 0.667, P = 0.001 when compared to elbow torque; R = 0.653, P = 0.002 when compared to shoulder torque) measurements were all significantly correlated with the results from the motion capture lab. Arm speed showed significant correlations to shoulder internal rotation speed (R = 0.668, P = 0.001) and shoulder velocity magnitude (R = 0.659, P = 0.002). For the entire sample, arm slot and shoulder rotation measurements were on a similar scale, or within 5–15% in absolute value, of magnitude to measurements from the motion capture test, averaging eight degrees less (12.9% relative differences) and nine degrees (5.4%) less, respectively. Arm speed had a much larger difference, averaging 3,745 deg/s (80.2%) lower than shoulder internal rotation velocity, and 3,891 deg/s (80.8%) less than the shoulder velocity magnitude. The stress metric was found to be 41 Newton meter (Nm; 38.7%) less when compared to elbow torque, and 42 Nm (39.3%) less when compared to shoulder torque. Despite the differences in magnitude, the correlations were extremely strong, indicating that the MotusBASEBALL sensor had high reliability for casual use.ConclusionThis study attempts to validate the use of the MotusBASEBALL for future studies that look at the arm slot, shoulder rotation, arm speed, and stress measurements from the MotusBASEBALL sensor. Excepting elbow extension velocity, all metrics from the MotusBASEBALL unit showed significant correlations to their corresponding metrics from motion capture and while some magnitudes differ substantially and therefore fall short in validity, the link between the metrics is strong enough to indicate reliable casual use. Further research should be done to further investigate the validity and reliability of the arm speed metric.

BackgroundWeighted-baseball training programs are used at the high school, collegiate, and professional levels of baseball. The purpose of this study was to evaluate the effects of a six-week training period consisting of weighted implements, manual therapy, weightlifting, and other modalities on shoulder external rotation, elbow valgus stress, pitching velocity, and kinematics.HypothesisA six-week training program that includes weighted implements will increase pitching velocity along with concomitant increases in arm angular velocities, joint kinetics, and shoulder external rotation.MethodsSeventeen collegiate and professional baseball pitchers (age range 18–23, average: 19.9 ± 1.3) training at Driveline Baseball were evaluated via a combination of an eight-camera motion-capture system, range-of-motion measurements and radar- and pitch-tracking equipment, both before and after a six-week training period. Each participant received individualized training programs, with significant overlap in training methods for all athletes. Twenty-eight biomechanical parameters were computed for each bullpen trial, four arm range-of-motion measurements were taken, and pitching velocities were recorded before and after the training period. Pre- and post-training period data were compared via post-hoc paired t tests.ResultsThere was no change in pitching velocity across the seventeen subjects. Four biomechanical parameters for the holistic group were significantly changed after the training period: internal rotational velocity was higher (from 4,527 ± 470 to 4,759 ± 542 degrees/second), shoulder abduction was lower at ball release (96 ± 7.6 to 93 ± 5.4°), the shoulder was less externally rotated at ball release (95 ± 15 to 86 ± 18°) and shoulder adduction torque was higher (from 103 ± 39 to 138 ± 53 N-m). Among the arm range of motion measurements, four were significantly different after the training period: the shoulder internal rotation range of motion and total range of motion for both the dominant and non-dominant arm. When the group was divided into those who gained pitching velocity and those who did not, neither group showed a significant increase in shoulder external rotation, or elbow valgus stress.ConclusionsFollowing a six-week weighted implement program, pitchers did not show a significant change in velocity, joint kinetics, or shoulder external rotation range of motion. When comparing pitchers who gained velocity versus pitchers who did not, no statistically significant changes were seen in joint kinetics and shoulder range of motion.

The purpose of this study was to examine differences in the Electromyography (EMG) amplitude of the serratus anterior between 45° kettlebell carries and 90° kettlebell carries. Thirty-three men aged roughly between 19 and 23 and who were either college or professional baseball pitchers were chosen and randomly assigned to either perform the 45° kettlebell carry followed by the 90° kettlebell carry (n = 17) or the 90° kettlebell carry followed by the 45° kettlebell carry (n = 16). Each pitcher was instructed in the proper usage of the exercise and assigned a short break between the two carries. Changes in EMG amplitude were examined after proper band-pass filtering, normalization, and moving average-smoothing of the raw EMG signal. Differences of the EMG amplitude mean frequencies were examined between each subject’s individual carries and the clumped groups of all 45° and 90° carries. Among each individual comparison, eight pitchers had “large” Effect Size differences between the EMG amplitudes of their two carries, with seven of them signaling the 45° carry as the larger value. In addition, when examining the grouped mean differences of the EMG amplitudes, we found the 45° carries to be significantly higher (p-value of 0.018).

No abstract

8 Purpose: Bench press variations that elicit greater serratus anterior muscle activation may be 9 preferable for improving scapula stability and avoiding injury in overhead throwing athletes. 10Here we compare serratus anterior activity during dumbbell and barbell bench press using 11 surface electromyography (EMG). 12Methods: Forty college and professional baseball pitchers (men, age 22.6 ± 2.5 years) performed 13four sets of bench press-light (43 kg) and heavy (61 kg) dumbbell and barbell-with five 14repetitions each. Each pitcher was instructed in proper technique and rested for 90 seconds 15 between sets. Surface electrodes were used to record serratus anterior activity during isometric 16contraction (for normalization) and during each set. 17Results: Dumbbell sets showed significantly greater serratus anterior activation than barbell 18 sets at both weights (weight-normalized mean EMG amplitude, 44.7 versus 38.2; p = .005). 19Conclusion: This suggests that dumbbell press is preferable to barbell press for building serratus 20anterior muscle strength. 22Keywords 23 overhead throwing athlete, dumbbell, barbell, scapular stability, activation 24 25 DOI 26