No abstract

Flower-like copper cobaltite (CuCo2O4) nanosheets anchored on graphite paper have been synthesized using a facile hydrothermal method followed by a postannealing treatment. Supercapacitor electrodes employing CuCo2O4 nanosheets exhibit an enhanced capacitance of 1131 F g(-1) at a current density of 1 A g(-1) compared with previously reported supercapacitor electrodes. The CuCo2O4 electrode delivers a specific capacitance of up to 409 F g(-1) at a current density of as high as 50 A g(-1), and a good long-term cycling stability, with 79.7% of its specific capacitance retained after 5000 cycles at 10 A g(-1). Furthermore, the as-prepared CuCo2O4 nanosheets on graphite paper can be fabricated as electrodes and used as enzymeless glucose sensors, which exhibit good sensitivity (3.625 μA μM(-1) cm(-2)) and an extraordinary linear response ranging up to 320 μM with a low detection limit (5 μM).

Black phosphorus (BP) is rediscovered as a 2D layered material. Since its first isolation in 2014, 2D BP has triggered tremendous interest in the fields of condensed matter physics, chemistry, and materials science. Given its unique puckered monolayer geometry, 2D BP displays many unprecedented properties and is being explored for use in numerous applications. The flexibility, large surface area, and good electric conductivity of 2D BP make it a promising electrode material for electrochemical energy storage devices (EESDs). Here, the experimental and theoretical progress of 2D BP is presented on the basis of its preparation methods. The structural and physiochemical properties, air instability, passivation, and EESD applications of 2D BP are discussed systemically. Specifically, the latest research findings on utilizing 2D BP in EESDs, such as lithium‐ion batteries, supercapacitors, and emerging technologies (lithium–sulfur batteries, magnesium‐ion batteries, and sodium‐ion batteries), are summarized. On the basis of the current progress, a few personal perspectives on the existing challenges and future research directions in this developing field are provided.

No abstract

New insight into the effect of fluorine doping and oxygen vacancies on electrochemical performance of Co 2 MnO 4 for flexible quasi-solid-state asymmetric supercapacitors, Energy Storage Materials (2019),

In this work, we report a low-cost technique for fabrication of a simple three-dimensional (3D) free-standing nickel nanoparticle/graphene aerogel with a graphene sheet network. The 3D composite architecture was formed through the self-assembly aggregation of graphene accompanied by nickel nanoparticle in situ loading on the graphene sheet during the hydrothermal reduction of graphene oxide and Ni ions. The obtained composite architecture was characterized using X-ray diffraction, Fourier transform infrared, and scanning electron microscopy. The electrocatalytic properties of the as-synthesized Ni/graphene aerogel for ethanol oxidation were investigated using cyclic voltammetry and chronoamperometry. A high peak current density of about 6 mA cm^-2 for ethanol oxidation was recorded during ethanol oxidation under the test condition of adding 0.1 M ethanol in 0.1 M NaOH solution. This result revealed excellent electrocatalytic activity for ethanol oxidation, which shows great potential for direct application in ethanol fuel cells. This study provides a guide to preparing well-defined sponge-like three-dimensional metallic/graphene nanoarchitectures for fuel cell applications. © 2013 The Royal Society of Chemistry

Flexible quasi‐/all‐solid‐state supercapacitors have elicited scientific attention to fulfill the explosive demand for portable and wearable electronic devices. However, the use of electrode materials faces several challenges, such as intrinsically slow kinetics and volume change upon cycling, which impede the energy output and electrochemical stability. This study presents well‐aligned molybdenum dioxide@nitrogen‐doped carbon (MoO2@NC) and copper cobalt sulfide (CuCo2S4) tubular nanostructures grown on flexible carbon fiber for use as electrode materials in supercapacitors. Benefiting from the chemically stable interfaces, affluent active sites, and efficient 1D electron transport, the MoO2@NC and CuCo2S4 nanostructures integrated on conductive substrates deliver excellent electrochemical performance. A flexible quasi‐solid‐state asymmetric supercapacitor composed of MoO2@NC as the negative electrode and CuCo2S4 as the positive electrode achieves an ultrahigh energy density of 65.1 W h kg−1 at a power density of 800 W kg−1 and retains a favorable energy density of 27.6 W h kg−1 at an ultrahigh power density of 12.8 kW kg−1. Moreover, it demonstrates good cycling performance with 90.6% capacitance retention after 5000 cycles and excellent mechanical flexibility by enabling 92.2% capacitance retention after 2000 bending cycles. This study provides an effective strategy to develop electrode materials with superior electrochemical performance for flexible supercapacitors.

New and novel 3D hierarchical porous graphene aerogels (HPGA) with uniform and tunable meso-pores (e.g., 21 and 53 nm) on graphene nanosheets (GNS) were prepared by a hydrothermal self-assembly process and an in-situ carbothermal reaction. The size and distribution of the meso-pores on the individual GNS were uniform and could be tuned by controlling the sizes of the Co3O4 NPs used in the hydrothermal reaction. This unique architecture of HPGA prevents the stacking of GNS and promises more electrochemically active sites that enhance the electrochemical storage level significantly. HPGA, as a lithium-ion battery anode, exhibited superior electrochemical performance, including a high reversible specific capacity of 1100 mAh/g at a current density of 0.1 A/g, outstanding cycling stability and excellent rate performance. Even at a large current density of 20 A/g, the reversible capacity was retained at 300 mAh/g, which is larger than that of most porous carbon-based anodes reported, suggesting it to be a promising candidate for energy storage. The proposed 3D HPGA is expected to provide an important platform that can promote the development of 3D topological porous systems in a range of energy storage and generation fields.