Considering the excellent properties of three dimensional (3D) porous graphene framework and Prussian blue (PB), a combination of macro porous graphene network with PB might give enhanced removal capacity of radioactive cesium (137Cs) [1]. Although there have been many reports of PB decorated organic/inorganic composites for Cs removal applications, synthesis of the hetero structured 3D porous PB/graphene composite is scarce in the literature [2].In previous work, we present a simple and general method to fabricate PB/reduced graphene oxide foam (RGOF) via one-step hydrothermal method for the efficient removal of 137Cs. This macro porous network allowed rapid cesium ion diffusion into three dimensionally connected PB, while the interconnected graphene sheets provided excellent mechanical integrity and served a high adsorption capacity (18.67 mg/g) to the PB. An adsorption isotherm was fitted well by the Langmuir model with a linear regression correlation value of 0.97. The 3D macro porous adsorbents showed excellent removal efficiency of over 99.5% 137Cs from contaminated water (87.49 Bq/g) [3].To characterize the Ca-alginate beads, The SEM images were acquired using an FE-SEM (NNS450, FEI) at various acceleration voltage of 5 to 15 kV. The FTIR spectra were recorded using a Jasco FT/IR-6600. The XRD patterns were collected using a Bruker D2 PHASER (Germany) diffractometer with Cu Kα radiation. The BET surface area and average pore diameter were obtained from the N2 adsorption/desorption isotherm using a fully automatic physisorption analyzer (ASAP 2020, Tristar). The XPS measurements were obtained using a Thermo Scientific, K-Alpha electron spectrometer with an Al X-ray source. UV-vis analysis were carried out using a V770 (JASCO) spectrophotometer. The mechanical properties were measured using micro-indenter measurements (Noise Is a Signal (NIS), customized). The inductively coupled plasma mass spectrometry (ICP-MS) measurements were carried out using a PerkinElmer ELAN6100. The radioactive cesium activity was measured using a High Purity Germanium (HPGe) detector (Canberra, USA).Especially the surface analysis of this porous nanomaterials by scanning electron microscopy meet with a difficulty to get a clear cross-sectional SE image. The porous nanomaterial, Ca-alginate beads and other composite such as alginate/AIP clay composite, P-MSC composite were hard to get a clear crosssection of sample. The material was soft texture as marshmallow which cause the structure collapse by blade cutting. Other problem was electron beam damage on the sample. The electron microscopy beam source occurs shrinkage and carbon contamination of the samples.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.