No abstract

No abstract

No abstract

Acoustic emission (AE) was applied for detection of microcrack initiation in carbon fiber reinforced polymer composites subjected to shear stresses. Experimental materials were prepared from polyester bonded unidirectional (1D) non-crimp fabric and 2D plain-weave carbon fiber fabrics, using the resin transfer moulding technology. Control of epoxy resin/carbon textile proportions enabled variation of fiber volume content from small (34/35% for 2D/1D), through medium (51%) to high (68%). Rectangular samples (45 × 4 × 2 mm) were cut from 1D plates along [0] and across [90] fibers. Similar size samples from 2D plates were cut along warp/weft axes as well as in two orthogonal bias directions. Selected side surfaces were polished for microscopic (SEM) observations. Short-beam-strength tests were performed in 3-point bending (l/h=4), with two AE sensors attached for damage monitoring, which allowed to interrupt loading sequence before final failure. The acoustic emission historic index was the most effective AE parameter in damage initiation control. Microcracks developing on polished composite side-surfaces were observed under the SEM and direct microscopic evidence confirmed fiber debonding to be the principal mechanism of crack initiation in these materials and testing conditions before any further damage.

Acoustic emission (AE) technique was applied to continuously monitor property degradation during standard thermal shock fatique testing of three distinct types of refractories. AE results were correlated with respective strength losses of analyzed materials after a defined number of heating and cooling cycles. The complex nature of the AE signals was revealed by AE amplitude and duration analysis indicating that not all of the signals that were registered during thermal shock tests could be correlated with strength changes. On this basis, it was postulated that simple counting of a number of AE events should not be used as a measure of the degree of damage in refractories under thermal shock. [