This paper reports a self-powered, flexible, piezo-and pyro-electric hybrid nanogenerator (NG) device that can be fixed on different locations of human skin for detecting static and dynamic pressure variations and can also monitor temperature fluctuations during the respiration process. An efficient and cost-effective fabrication strategy has been developed to create electrospun poly(vinylidene fluoride) (PVDF)/ graphene oxide (GO) nanofibers, which are used to create a highly sensitive wearable pressure sensor and pyroelectric breathing sensor. The sensor can accurately and rapidly detect pressures as low as 10 Pa with a high sensitivity (4.3 V/kPa), a key performance indicator for wearable sensors. Importantly, the sensor exhibits a high sensitivity to bending and stretching by finger, wrist, and elbow. The pressure sensor is also highly sensitive to vocal vibrations when attached to the human throat. The device can generate a maximum output power density of ∼6.2 mW/m 2 when subjected to a compressive stress, which enhances its range of applications. Moreover, it is demonstrated that doping with GO improves the pyroelectric energy harvesting and sensing performance of the device under repeated temperature fluctuations. The PVDF/GO-based nanogenerator has a maximum pyroelectric output power density of ∼1.2 nW/m 2 and can sense temperature changes during respiration, which makes it promising as a pyroelectric breathing sensor. It is demonstrated that processing of the PVDF-GO self-powered multifunctional pressure and pyroelectric breathing sensor can be up-scaled for fabricating compact and high-performance electronic skins for application in health monitoring, motion detection, and portable electronics.

This work introduces a piezoelectric–pyroelectric nanogenerator (P-PNG) based on methylammonium lead iodide (CH3NH3PbI3) incorporated electrospun poly­(vinylidene fluoride) (PVDF) nanofibers that are able to harvest mechanical and thermal energies. During the application of a periodic compressive contact force at a frequency of 4 Hz, an output voltage of ∼220 mV is generated. The P-PNG has a piezoelectric coefficient (d 33) of ∼19.7 pC/N coupled with a high durability (60 000 cycles) and quick response time (∼1 ms). The maximum generated output power density (∼0.8 mW/m2) is sufficient to charge up a variety of capacitors, with the potential to replace an external power supply to drive portable devices. In addition, upon exposure to cyclic heating and cooling at a temperature of 38 K, a pyroelectric output current of 18.2 pA and a voltage of 41.78 mV were achieved. The fast response time of 1.14 s, reset time of 1.25 s, and pyroelectric coefficient of ∼44 pC/m2 K demonstrate a self-powered temperature sensing capability of the P-PNG. These characteristics make the P-PNG suitable for flexible piezoelectric–pyroelectric energy harvesting for self-powered electronic devices.

Perhaps the most abundant form of waste energy in our surrounding is the parasitic magnetic noise arising from electrical power transmission system. In this work, a flexible and rollable magneto-mechano-electric nanogenerator (MMENG) based wireless IoT sensor has been demonstrated in order to capture and utilize the magnetic noise. Free standing magnetoelectric composites are fabricated by combining magnetostrictive nickel ferrite (NiFe 2 O 4 ) nanoparticles and piezoelectric polyvinylidene-co-trifluoroethylene (P(VDF-TrFE)) polymer. The magnetoelctric 0-3 type nanocomposites possess maximum magnetoelectric voltage co-efficient (α) of 11.43 mV/cm-Oe. Even, without magnetic bias field 99 % of the maximum value is observed due to self-bias effect. As a result, the MMENG generates peak-to-peak open circuit voltage of 1.4 V, output power density of 0.05 µW/cm 3 and successfully operates commercial capacitor under the weak (⁓ 1.7× 10 -3 T) and low frequency (⁓ 50 Hz) stray magnetic field arising from the power cable of home appliances such as, electric kettle. Finally, the harvested electrical signal has been wirelessly transmitted to a smart phone in order to demonstrate the possibility of position monitoring system construction. This cost effective and easy to integrate approach with tailored size and shape of device configuration is expected to be explored in nextgeneration self-powered IoT sensors including implantable biomedical devices and human health monitoring sensory systems.

In recent years, flexible and sensitive pressure sensors are of extensive interest in healthcare monitoring, artificial intelligence, and national security. In this context, we report the synthetic procedure of a three-dimensional (3D) metal–organic framework (MOF) comprising cadmium (Cd) metals as nodes and isoniazid (INH) moieties as organic linkers (CdI2–INHCMe2) for designing self-polarized ferroelectret-based highly mechano-sensitive skin sensors. The as-synthesized MOF preferentially nucleates the stable piezoelectric β-phase in poly­(vinylidene fluoride) (PVDF) and also gives rise to a porous ferroelectret composite film. Benefiting from the porous structure of 3D MOFs, composite ferroelectret film-based ultrasensitive pressure sensor (mechano-sensitivity of 8.52 V/kPa within 1 kPa pressure range) as well as high-throughput ( power density of 32 μW/cm2) mechanical energy harvester (MEH) has been designed. Simulation-based finite element method (FEM) analysis indicates that the geometrical stress confinement effect within the interpore region of the ferroelectret structure synergistically influences the mechano-electrical property of the MEH. In addition, 143 pC/N (∼4.5 times higher than commercial piezoelectric PVDF films) piezoelectric charge coefficient (d 33) magnitude and superior response time (t r ∼ 8 ms) of this composite ferroelectret film enable the detection of different physiological signals such as coughing, pronunciation, and gulping behavior, making it a promising candidate for early intervention of healthcare, which may play a significant role in accurate alert of influenza and chronic obstructive pulmonary disease (COPD)-related symptoms. In addition, MEH enables the tracking of the subtle pressure change in the wrist pulse, indicating its usefulness in effective mechano-sensitivity. Since the cardiovascular signal is one of the vital parameters that can determine the on-going physiological conditions, the wireless transmission of the detected wrist pulse signal has been demonstrated. All of these features coupled with wireless data transmission indicate the promising application of MOF-assisted composite ferroelectret films in noninvasive real-time remote healthcare monitoring.

The real-time application of piezoelectric nanogenerators (PNGs) under a harsh environment remains a challenge due to lower output performance and poor durability. Thus, the development of flexible, sensitive, and stable PNGs became a topic of interest to capture different human motions including gesture monitoring to speech recognition. Herein, a scalable approach is adapted where naphthylamine bridging a [Cd­(II)-μ-I4] two-dimensional (2D) metal–organic framework (MOF)-reinforced poly­(vinylidene fluoride) (PVDF) composite nanofibers mat is prepared to fabricate a flexible and sensitive composite piezoelectric nanogenerator (C-PNG). The needle-shaped MOF was successfully synthesized by the layering and diffusion of two different solutions. The incorporation of single-crystalline 2D MOF ensures a large content of electroactive phases (98%) with a resultant high-magnitude piezoelectric coefficient of 41 pC/N in a composite nanofibers mat due to the interfacial specific interaction with −CH2–/–CF2– dipoles of PVDF. As an outcome, C-PNG generates high electrical output (open-circuit voltage of 22 V and maximum power density of 24 μW/cm2) with a very fast response time (t r ≈ 5 ms) under periodic pressure imparting stimuli. Benefiting from bending and twisting functionality, C-PNG is capable of scavenging biomechanical energy by mimicking complex musculoskeletal motions that broaden its application in wearable electronics and fabric integrated medical devices. In addition, C-PNG also demonstrates an efficient acoustic vibration to electric energy conversion capability with an improved power density and acoustic sensitivity of 6.25 μW and 0.95 V/Pa, respectively. The overall energy conversion efficiency is sufficient to operate several consumer electronics without any energy storage unit. This acoustic observation is further validated by the finite element method-based theoretical simulation. Overall, the 2D MOF-based device design strategy opens up a new possibility to develop a human-motion compatible energy generator and a self-powered acoustic sensor to power up electronic gadgets as well as low-frequency noise detection.

No abstract

The design and development of intrinsically stretchable all-organic self-powered sensors concurrently perceiving temperature and pressure remain a challenge but deliver an exciting platform to realize environmentally friendly wearable electronics. In this approach, a biomimetic all-organic stretchable energy harvester is designed by a xylitol-added poly­(3,4-ethylenedioxythiophene):poly­(4-styrenesulfonate) (PEDOT:PSS/Xyl) film as a compatible overlay electrode with polyaniline-reinforced one-dimensional aligned poly­(vinylidene fluoride) hybrid electroactive soft nanowires. The gradient of elastic modulus between the electrode and the active nanowire component enables the all-organic device to manifest excellent power-generating performance under external temperature fluctuation (∼3 μW/m2 under ΔT ∼ 92 K) and mechanical force (∼31 μW/cm2 at 30 N). Importantly, the device renders simultaneous energy scavenging of temperature and pressure changes under pressing and stretching conditions (∼20%). The excellent mechanosensitivity (∼100 mV/N), fast response time (∼1 ms), outstanding mechanical and thermal stability, and good temperature resolution <10 K enable the harvester to act as an epidermal sensor, which simultaneously detects and discriminates both subtle pressure and thermal deviations exposed to an epidermis surface. The real-time recording and wireless transferring of physiological signals to a smartphone indicate an effective way to realize remote healthcare monitoring for early intervention.

In this work, an all-fiber pyro- and piezo-electric nanogenerator (PPNG) is designed by multiwall carbon nanotube (MWCNT) doped poly(vinylidene fluoride) (PVDF) electrospun nanofibers as the active layer and interlocked conducting...