No abstract

No abstract

This study deals with the degradation of polyethylene terephthalate (PET) waste through aminolysis with various amines. All of these degradation experiments were carried out at ambient temperature and at normal pressure. Although PET is known to be recycled in many ways, but still there is a need of development of other environment friendly recycling techniques. The amines used to study the degradation of PET waste were namely methylamine, ethylamine, and n-butyl amine, respectively where the degradation of PET waste completes in 45 days.The aminolyzed products so obtained were characterized by using various conventional techniques such as spectroscopic techniques namely IR, NMR, and simultaneous differential scanning calorimeter (DSC). In the present research work, a useful method of PET recycling by using various amines was successfully established.

The degradation of polyethylene terephthalate (PET) waste by making use of hydrazine monohydrate was investigated at ambient temperature and pressure. The aminolysed end products obtained were characterized with chemical tests and spectroscopic techniques namely IR, UV-visible spectroscopy and NMR, and the differential scanning calorimeter (DSC). The end product was characterized as terephthalic dihydrazide (TPD) and further used in PVC compounding as secondary plasticizer. The hardness, tensile strength, elongation at break, thermal stability, and compatibility of the PVC sheet were studied and concluded that the aminolysed product may find potential application as secondary plasticizer in PVC formulations.

A novel acrylic aromatic amide oligomer was synthesized by using depolymerized end product of PET waste with hydrazine monohydrate. The end product of aminolysed PET waste was synthesized under ambient conditions and was used in the preparation of novel acrylic oligomer with the reaction of acryloyl chloride prepared from acrylic acid. The acrylic oligomer was characterized by spectroscopic techniques, such as FTIR, 1 H-NMR, UV, Mass spectrometry, and by other analytical techniques such as, Iodine value, TGA, and DSC. The proposed structure of the oligomer is supported by its spectral analysis and the same is inferred from other techniques. The acrylic oligomer mixed with other acrylate monomers such as methylmethacrylate, ethylhexylacrylate, acrylic acid, and photoinitiator, can be cured by UV radiation and can thus be used as an adhesion promoter on metal/glass surface. This article presents the possibility of using a difunctional aromatic amide oligomer with excellent hydrogen bonding capacity as an alternative to urethane acrylates in radiation curable formulations.

No abstract

No abstract

No abstract