In this review, the efforts done by different research groups to enhance the performance of the electric double-layer capacitors (EDLCs), regarding the effect of the modification of activated carbon structures on the electrochemical properties, are summarized. Activated carbon materials with various porous textures, surface chemistry, and microstructure have been synthesized using several different techniques by different researchers. Micro-, meso-, and macroporous textures can be obtained through the activation/carbonization process using various activating agents. The surface chemistry of activated carbon materials can be modified via: (i) the carbonization of heteroatom-enriched compounds, (ii) post-treatment of carbon materials with reactive heteroatom sources, and (iii) activated carbon combined both with metal oxide materials dan conducting polymers to obtain composites. Intending to improve the EDLCs performance, the introduction of heteroatoms into an activated carbon matrix and composited activated carbon with either metal oxide materials or conducting polymers introduced a pseudo-capacitance effect, which is an additional contribution to the dominant double-layer capacitance. Such tricks offer high capacitance due to the presence of both electrical double layer charge storage mechanism and faradic charge transfer. The surface modification by attaching suitable heteroatoms such as phosphorus species increases the cell operating voltage, thereby improving the cell performance. To establish a detailed understanding of how one can modify the activated carbon structure regarding its porous textures, the surface chemistry, the wettability, and microstructure enable to enhance the performance of the EDLCs is discussed here in detail. This review discusses the basic key parameters which are considered to evaluate the performance of EDLCs such as cell capacitance, operating voltage, equivalent series resistance, power density, and energy density, and how these are affected by the modification of the activated carbon framework.
A blend polymer based on the latex of the South-Asian giant milkweed Calotropis gigantea (CGL) combined with poly (vinylidene fluoride)-co-hexafluoropropylene (PVDF-HFP) at a mass ratio of 1:1 without the addition of doping salts was synthesized via solution casting to prepare an ionic conductive film. The morphology, crystalline state, vibrational and thermal properties of the film were investigated by Scanning electron microscopy, X-ray diffraction, Fourier Transform infrared spectroscopy (FTIR), Thermal gravimetric analysis (TGA) and Differential scanning calorimetry (DSC). The ionic conductivity and transport properties were investigated by using electrochemical impedance spectroscopy (EIS) Technique. Due the highest ionic conductivity at room temperature (2.7 x 10−2 S/cm), all-solid-state electrolyte was assembled using the prepared polymer film and a comparative study was conducted with respect to 1M H2SO4 liquid electrolyte, regarding the specific capacitance and the electrical properties. The results demonstrate that the fabricated all-solid-state supercapacitor using PVDF-HFP/CGL blend polymer film as electrolyte matches the performance of the liquid electrolyte.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.