No abstract

Cylindrical silk fiber (SF) was coated with Graphene oxide (GO) for capacitive humidity sensor applications. Negatively charged GO in the solution was attracted to the positively charged SF surface via electrostatic force without any help from adhesive intermediates. The magnitude of the positively charged SF surface was controlled through the static electricity charges created on the SF surface. The GO coating ability on the SF improved as the SF's positive charge increased. The GO-coated SFs at various conditions were characterized using an optical microscope, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Raman spectroscopy, and LCR meter. Unlike the intact SF, the GO-coated SF showed clear response-recovery behavior and well-behaved repeatability when it was exposed to 20% relative humidity (RH) and 90% RH alternatively in a capacitive mode. This approach allows humidity sensors to take advantage of GO's excellent sensing properties and SF's flexibility, expediting the production of flexible, low power consumption devices at relatively low costs.

No abstract

The oxidation properties of graphene oxide (GO) are systematically correlated with their chemical sensing properties. Based on an impedance analysis, the equivalent circuit models of the capacitive sensors are established, and it is demonstrated that capacitive operations are related to the degree of oxidation. This is also confirmed by X-ray diffraction and Raman analysis. Finally, highly sensitive stacked GO sensors are shown to detect humidity in capacitive mode, which can be useful in various applications requiring low power consumption.

A zero-power, low-cost ultraviolet (UV)-C colorimetric sensor is demonstrated using a gallium oxide and reduced graphene oxide (rGO) hybrid via photoelectrochemical reactions. A wide bandgap semiconductor (WBS) such as gallium oxide with an energy bandgap of 4.9 eV generates electron-hole pairs (EHPs) when exposed under a mercury lamp emitting 254 nm. While the conventional UVC sensors employing WBS convert the generated EHPs into an electrical signal via a solid-state junction device (SSD), our newly proposed UVC sensory system works by converting EHPs into an electrochemical reaction. The electrochemical reaction causes the degradation of a cationic thiazine redox dye, methylene blue (MB) and thereby spontaneously changes its color. As more rGO was hybridized with the gallium oxide, MB degradation was effectively expedited. Thus, the level of MB degradation under UVC can be evaluated as a UVC indicator. Unlike conventional SSD-based UVC sensors, our responsive colorimetric sensor can be applied where needed inexpensively and zero power.