We measured the contact areas and contact stresses at the post-cam mechanism of a posterior-stabilised total knee arthroplasty when a posterior force of 500 N was applied to the Kirschner Performance, Scorpio Superflex, NexGen LPS Flex Fixed, and NexGen LPS Flex Mobile knee systems. Measurements were made at 90 degrees, 120 degrees, and 150 degrees of flexion both in neutral rotation and 10 degrees of internal rotation of the tibial component. Peak contact stresses at 90 degrees, 120 degrees, and 150 degrees were 24.0, 33.9, and 28.8 MPa, respectively, for the Kirschner; 26.0, 32.4, and 22.1 MPa, respectively, for the Scorpio; and 34.1, 31.5, and 32.5 MPa, respectively, for the NexGen LPS Flex Fixed. With an internally rotated tibia, the contact stress increased significantly with all the fixed-bearing arthroplasties but not with the NexGen LPS Flex Mobile arthroplasty. The post-cam design should be modified in order to provide a larger contact area whilst avoiding any impingement and edge loading.

Proto‐Araceae, the earliest diverged lineage within the family Araceae, includes two subfamilies, Gymnostachydoideae (one species) and Orontioideae (eight species). Based on an extensive sampling (a total of 198 accessions) of six chloroplast non‐coding regions (5799 aligned sites), we assessed phylogenetic relationships among the genera and species within subfamily Orontioideae and estimated the timing of intercontinental disjunct events in the Northern Hemisphere. Overall phylogenetic relationships among the genera were consistent with results from previous studies, but several new important findings were discovered, primarily within Symplocarpus Salisb. ex W. P. C. Barton. First, two major lineages within Symplocarpus were identified: one lineage included S. foetidus (L.) Salisb. ex W. Barton, S. nabekuraensis Otsuka & K. Inoue, and S. renifolius Schott ex Tzvelev (Japan), whereas the other included S. nipponicus Makino, S. egorovii N. S. Pavlova & V. A. Nechaev, and S. renifolius (Korea). Symplocarpus renifolius in Japan was tetraploid and closely related to the tetraploid S. foetidus in eastern North America. Populations of S. renifolius in Korea were confirmed to be diploid (2n = 30) and shared the most recent common ancestor with the other diploid species, S. nipponicus. Second, two recently described species, S. nabekuraensis and S. egorovii, were deeply embedded within S. renifolius in Japan and Korea, respectively, and their distinct taxonomic status requires further assessment. Finally, two intercontinental disjunction events in the subfamily, one in Lysichiton Schott between eastern Asia and western North America and the other in Symplocarpus between eastern Asia and eastern North America, were estimated to be between 4.5 and 1.4 million years ago (Pliocene and Pleistocene) and between 1.9 and 0.5 million years ago (Pleistocene), respectively.

No abstract

No abstract

This report describes the study on the lubrication characteristics of porous journal bearings as a DC spindle motor's bearing system made with oil impregnated sintered materials having some hydrodynamic shapes. Herring Bone (Ⅰ & Ⅱ), Three Lobed Type or Sleeve as radial hydrodynamic shapes were proposed, and four kinds of specimens were produced for porous journal bearings with pivot supported conditions. They were examined experimentally to optimize the hydrodynamic shape of porous journal bearings by measuring the lubrication characteristics at the shaft starting state under sine-wave vibrated conditions. This report particularly refers to the experimental examination for Settling Time, Lissajous Curve Diagram or Shaft Whirling by measuring the Time History Waveform (T.H.W.) of the shaft such as the above mentioned lubrication characteristics under the same conditions. Furthermore, it was investigated to discuss the influences of vibrated frequency changes to the lubrication characteristics by measuring the T.H.W. of the shaft under the above conditions.

No abstract

No abstract

No abstract