This study presents the latest results of the groundwater monitoring of a research project, which tested an innovative pump and treat method in combination with an in-situ remediation. This technique was assessed on an abandoned site in Austria, where two hot spots of hexavalent chromium (Cr(VI)) were located. For the in-situ remediation, a strong reducing agent (sodium dithionite) was injected into the underground to reduce Cr(VI) to Cr(III) by using different injection strategies. Throughout this treatment, part of the Cr(VI) is mobilized and not instantly reduced. To prevent a further spreading of the mobilized Cr(VI), the pump and treat method, which uses zero-valent iron to clean the groundwater, was installed downgradient of the hot spots. Based on the groundwater sample analyses, it was possible to distinguish different remediation phases, characterized by excess chromate and excess sulfite. During the excess sulfite conditions, Cr(VI) was successfully removed from the system, but after terminating the sodium dithionite injection, the Cr(VI) rebounded. Keywords Cr(VI) remediation. In-situ treatment. Sodium dithionite injection. Cr(VI) mobilization. Cr(VI) reduction. Rebound effect 2−), but this newly formed ion is rather unstable.
Zero-valent iron (ZVI) has been used for water treatment for more than 160 years. However, passivation of its surface often constituted a problem which could only be tackled recently by the innovative Ferrodecont process using a fluidized bed reactor. In this study, pilot scale experiments for the removal of Mo, Cr, W, Cu, Ag and Zn from two industrial waste water samples and lab-scale experiments for the beneficiation of the abrasion products are presented to integrate the Ferrodecont process into a complete recycling process chain. Firstly, 38.5 % of Cu was removed from sample A, yielding abrasion products containing 33.1 wt% Cu as metallic copper (Cu) and various Cu compounds. The treatment of sample B removed 99.8 % of Mo, yielding abrasion products containing 17.8 wt% of Mo as amorphous phases or adsorbed species. Thermal treatment (1300 °C) of the abrasion product A indicated a reduction of delafossite to metallic Cu according to differential scanning calorimetry (DSC), thermogravimetry (TG) and X-ray diffraction (XRD), which was successfully separated from the magnetic iron phases. Hydrometallurgical treatment (1.5 M NaOH, 3 d, liquid:solid ratio (L:S) = 15:1) of sample B yielded aqueous extracts with Mo concentrations of 5820 to 6300 mgL−1. In conclusion, this corresponds to an up to 53-fold enrichment of Mo during the entire process chain.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.