Flow cytometry is widely used for analyzing microparticles, such as cells and bacteria. In this paper, we report an innovative microsystem, in which several different optical elements (waveguides, lens and fiber-to-waveguide couplers) are integrated with microfluidic channels to form a complete microchip flow cytometer. All the optical elements, the microfluidic system, and the fiber-to-waveguide couplers were defined in one layer of polymer (SU-8, negative photoresist) by standard photolithography. With only a single mask procedure required, all the fabrication and packaging processes can be finished in one day. Polystyrene beads were measured in the microchip flow cytometer, and three signals (forward scattering, large angle scattering and extinction) were measured simultaneously for each bead. To our knowledge this is the first time forward scattered light and incident light extinction were measured in a microsystem using integrated optics. The microsystem can be applied for analyzing different kinds of particles and cells, and can easily be integrated with other microfluidic components.

Multimode polymer waveguides and fiber-to-waveguide couplers have been integrated with microfluidic channels by use of a single-mask-step procedure, which ensured self-alignment between the optics and the fluidics and allowed a fabrication and packaging time of only one day. Three fabrication procedures for obtaining hermetically sealed channels were investigated, and the spectrally resolved propagation loss (400-900 nm) of the integrated waveguides was determined for all three procedures. Two chemical absorbance cells with optical path lengths of 100 and 1000 microm were furthermore fabricated and characterized in terms of coupling loss, sensitivity, and limit of detection for measurements of the dye bromothymol blue.

Microfluidic systems have become more and more important in the field of analytical chemistry. Detection methods on these microsystems are essential for the identification and quantification of chemical species that are being analyzed. This review concentrates on the latest developments of optical detection methods and mass spectrometry in conjunction with microfluidic systems. Electrochemical methods are discussed in another review in the same issue of this journal. Within the optical detection section, topics such as multiplexed detection and the use of waveguides are discussed. Within the discussion of mass spectrometry, the main focus is on electrospray emitters as interfaces between microsystem and spectrometer. Apart from optical detection and mass spectrometry, other techniques such as flame ionization and nuclear magnetic resonance are also mentioned.

A study of the size dependent blue-and redshift of the plasmon band of silver nanoparticle films in aqueous solution is reported. A detection scheme, where the particle size is continuously decreased by means of controlled dissolution, while measuring the plasmon band position by UV−vis absorption spectroscopy is used. Both blue-and redshifts of the peak position are observed, depending on the presence of electron donors and/or acceptors in the solution, respectively. A great increase in plasmon shifts for smaller particle sizes (R < 5 nm vs R > 10 nm) is demonstrated, which we ascribe to a transition from an extrinsic regime for the larger particles, where shifts of the plasmon frequency are related to changes in the dielectric environment, while the dielectric function of the metal is constant, to an intrinsic regime for the smaller particles. For this intrinsic regime, operative for small particles, nonlocality of the dielectric constant has to be considered. The experimental data are fitted with a recently published theoretical model that takes dynamical surface screening and quantum size effects into account as well as by a Drude model with a corrected effective volume, resulting in a corrected electron density. The reported results have potential for developing nanosensors based on small nanoparticles below 5 nm in size by using their intrinsic response to adsorbed analytes. This detection scheme suggests a potential increase in the sensitivity of up to 3×, particularly when redox processes play a role, such as for the detection of reactive oxygen species.

Taking the next step from individual functional components to higher integrated devices, we present a feasibility study of a lab-on-a-chip system with five different components monolithically integrated on one substrate. These five components represent three main domains of microchip technology: optics, fluidics and electronics. In particular, this device includes an on-chip optically pumped liquid dye laser, waveguides and fluidic channels with passive diffusive mixers, all defined in one layer of SU-8 polymer, as well as embedded photodiodes in the silicon substrate. The dye laser emits light at 576 nm, which is directly coupled into five waveguides that bring the light to five different locations along a fluidic channel for absorbance measurements. The transmitted portion of the light is collected at the other side of this cuvette, again by waveguides, and finally detected by the photodiodes. Electrical read-out is accomplished by integrated metal connectors. To our knowledge, this is the first time that integration of all these components has been demonstrated.