Inhalation exposure to indoor particulate contaminants contributes as one of the leading threats to public health. Most existing airway morphometry models are either theoretical or semi-empirical; these are developed for predicting deposition fractions for an averaged general population subgroup. It is difficult to customize a fast and accurate prediction on individual basis. This study aims to analyse the regional particle deposition along an anatomically correct airway model, which is developed from a healthy volunteer’s computer tomography images. Computational fluid dynamics simulation results show that the majority of particles are deposited in the bronchi. Accumulation particles (0.1–2.0 μm) have the smallest deposition fraction in the lower airways. An increase in the aerodynamic diameter >2.0 μm of the particles elevated the deposition fraction. These findings inspire future investigations into control methods that minimize the negative health impact of indoor emissions.

Low-Voltage Mineral Deposition technology (LVMD), widely known as Biorock, has previously been suggested as support for coral reef restoration, as hypothesized high porosity, wide pore-size distribution and connectivity, and good strength properties may facilitate biological functions (for example larvae settlement) and durability. In this technology, very low voltage induces an electrical current that initiates precipitation and accretion of hard minerals (aragonite and calcite) on a metal in seawater. This technology has been discussed mainly for its biological value, while this paper wants to highlight also its engineering value as artificial reef material. Indeed, some of the properties that makes it valuable in one domain are also supporting its use in the other. Because the metal on which the precipitation takes place can be of any shape and size, so can the artificial reef and its mechanical strength characteristics are above the ones of corals and similar to concrete, indicating adequate durability. Coral and boulder reefs suffering from degradation have severe implications on biodiversity, protection from flooding, and cultural value and therefore understanding how to persevere and re-establish these ecosystems is central for sustainable intervention in the marine environment. By comparing chemical-physical characteristics of Coral Porites Exoskeleton (CPE), one typical reef building coral type, LVMD and High-Voltage Mineral Deposition (HVMD), we show that they possess highly similar properties including chemical composition, density, total porosity, pore-size distribution, physical and chemical heterogeneity, total and external surface areas, and comparable mechanical strength.

No abstract

Eelgrass shows potential in meeting the rising demands towards new, sustainable materials. It hosts a range of characteristics that benefits its application as a building material, such as thermal and acoustic insulating properties that can compete with conventional mineral wool insulation. However, as a porous bio-based building material, the moisture performance of eelgrass must be assessed to ensure its practical application. In this study, experimental investigations are conducted by a new automated vapor sorption analyzer (VSA) to measure adsorption and desorption of water vapor on different compressions of eelgrass insulation, ranging from loose strands to densely compacted insulation batts. Overall, higher sorption dynamics are observed in eelgrass insulation compared to conventional mineral wool insulation. Loose strands of eelgrass depict higher dynamics (including hysteresis) for the full range of relative humidity in comparison to insulation batts, potentially due to additional binder. Increasing the compression of eelgrass insulation batts results in lower sorption dynamics in the >70% relative humidity range. A Guggenheim-Anderson-deBoer model is applied that shows good fit with the experimental data and may be applied in moisture transfer calculations. This study furthers the potential of compressing eelgrass for application in passive design strategies through its moisture buffering capabilities.