ZnO nanowires, grown on transparent conducting oxide substrates from aqueous solutions of methenamine and Zn(NO3)2, were integrated as the wide band gap semiconductor into dye-sensitized solar cells. ZnO nanowires and their growth mechanisms were studied using electron microscopy, x-ray diffraction and photoluminescence measurements. The solution growth method forms dense arrays of long nanowires oriented normal to the substrate surface because nanowires growing at off-normal angles are prevented from growing further when they run into neighbouring wires. Dye-sensitized solar cells with ZnO nanowires were assembled and characterized using optical and electrical measurements. Short circuit current densities of 1.3 mA cm−2, and overall power conversion efficiencies of 0.3% were achieved with 8 µm long nanowires. Photocurrent and efficiency increase with increasing nanowire length and improved light harvesting. Low surface area and a shunt that appears under light illumination limit the solar cell performance. Internal quantum efficiencies were similar for nanowires of all lengths, indicating that electron transport is not limited by the nanowire dimensions for aspect ratios less than 70.

No abstract

An increasing number of biomedical applications requires detailed knowledge of the magnetic susceptibility of individual particles. With conventional techniques it is very difficult to analyze individual particles smaller than 1μm. The authors demonstrate how the susceptibility of individual nanoparticles can be determined in an efficient way by optically analyzing the confined Brownian motion of a nanoparticle trapped in a known magnetic potential well on a chip. A setup is introduced that has a controllable two-dimensional magnetic potential well, which is defined by an integrated microscopic current wire. Susceptibility measurements have been performed on 150–450nm superparamagnetic beads. They found differences in bead susceptibility of an order of magnitude and differences in volumetric susceptibility of more than a factor of 2.

. Bond characterization by detection and manipulation of particle mobility in an optical evanescent field biosensor. Journal of Physics D: Applied Physics, IOP Publishing, 2010, 43 (38) AbstractWe present an optical biosensor technology that integrates the tethered particle motion technique and the magnetic tweezer technique. The goal is to quantify the three-dimensional mobility of bound particle labels and to characterize the bond between the particle and the surface. We show using a series of four different lengths of dsDNA (105 bp to 590 bp) that plots of the height as function of the in-plane particle position reflect the bond length and bond flexibility. We analyze ensembles of bound particles and show that the height displacement is at maximum the bond length, but that non-specific sticking causes large variations between particles. We also measured the height of bound particles under influence of magnetic forces. A magnetic gradient force towards the surface brought particles on average closer to the surface, but a magnetic gradient force away from the surface did not bring all particles away from the surface. We show that the latter can be explained by magnetic anisotropy in the particles. Our results demonstrate that mobility detection of bound particle labels in an evanescent field is a promising technique to characterize the bond between a particle and a surface in a biosensor system.