Temperature dependent energy levels of methylammonium lead iodide are investigated using a combination of ultraviolet photoemission spectroscopy and optical spectroscopy. Our results show that the valence band maximum and conduction band minimum shift down in energy by 110 meV and 77 meV as temperature increases from 28 C to 85 C. Density functional theory calculations using slab structures show that the decreased orbital splitting due to thermal expansion is a major contribution to the experimentally observed shift in energy levels. Our results have implications for solar cell performance under operating conditions with continued sunlight exposure and increased temperature. V C 2015 AIP Publishing LLC. [http://dx.
On a scalable silicon technology platform, we demonstrate photodetectors matching or even surpassing state-of-the-art III–V devices. As key components in high-speed optoelectronics, photodetectors with bandwidths greater than 100 GHz have been a topic of intense research for several decades. Solely InP-based detectors could satisfy the highest performance specifications. Devices based on other materials, such as germanium-on-silicon devices, used to lag behind in speed, but enabled complex photonic integrated circuits and co-integration with silicon electronics. Here we demonstrate waveguide-coupled germanium photodiodes with optoelectrical 3-dB bandwidths of 265 GHz and 240 GHz at a photocurrent of 1 mA. This outstanding performance is achieved by a novel device concept in which a germanium fin is sandwiched between complementary in situ-doped silicon layers. Our photodetectors show internal responsivities of 0.3 A W−1 (265 GHz) and 0.45 A W−1 (240 GHz) at a wavelength of 1,550 nm. The internal bandwidth–efficiency product of the latter device is 86 GHz. Low dark currents of 100–200 nA are obtained from these ultra-fast photodetectors.
Millimetre-wave (mmWave) technology continues to draw great interest due to its broad applications in wireless communications, radar, and spectroscopy. Compared to pure electronic solutions, photonic-based mmWave generation provides wide bandwidth, low power dissipation, and remoting through low-loss fibres. However, at high frequencies, two major challenges exist for the photonic system: the power roll-off of the photodiode, and the large signal linewidth derived directly from the lasers. Here, we demonstrate a new photonic mmWave platform combining integrated microresonator solitons and high-speed photodiodes to address the challenges in both power and coherence. The solitons, being inherently mode-locked, are measured to provide 5.8 dB additional gain through constructive interference among mmWave beatnotes, and the absolute mmWave power approaches the theoretical limit of conventional heterodyne detection at 100 GHz. In our free-running system, the soliton is capable of reducing the mmWave linewidth by two orders of magnitude from that of the pump laser. Our work leverages microresonator solitons and high-speed modified uni-traveling carrier photodiodes to provide a viable path to chip-scale, high-power, low-noise, high-frequency sources for mmWave applications.
We report a class of thermophotovoltaic emitter structures built upon planar films that support resonant modes, known as perfectly-absorbing modes, that facilitate an exceptional optical response for selective emission. These planar structures have several key advantages over previously-proposed designs for TPV applications: they are simple to fabricate, are stable across a range of temperatures and conditions, and are capable of achieving some of the highest spectral efficiencies reported of any class of emitter structure. Utilization of these emitters leads to exceptionally high device efficiencies under low operating temperature conditions, which should open new opportunities for waste heat management. We present a theoretical framework for understanding this performance, and show that this framework can be leveraged as a search algorithm for promising candidate structures. In addition to providing an efficient theoretical methodology for identifying high-performance emitter structures, our methodology provides new insight into underlying design principles and should pave way for future design of structures that are simple to fabricate, temperature stable, and possess exceptional optical properties.
This paper reviews high-power photodiodes, waveguide photodetectors, and integrated photodiode-antenna emitters with bandwidths up to 150 GHz. Results from heterogeneous III-V photodiodes on silicon and Ge-on-Si photodiode arrays for analog applications are presented.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.