Titanium-containing carbide slag (TCS) is the product obtained by high-temperature carbothermal reduction in Titanium-bearing blast furnace slag (TBFS), which contains a large amount of TiC phase with excellent electrical conductivity. In this paper, conductive cement mortar was prepared with TCS as an aggregate and graphite as a conductive phase. The content of graphite on the compressive strength and electrical resistivity of the prepared cement mortar was investigated. The results showed that the replacement of standard sand with TCS as an aggregate not only significantly reduced the electrical resistivity of the cement mortar, but also improved its compressive strength. When the graphite content was 10 wt%, the cement mortar with TCS as the aggregate exhibited excellent comprehensive performance with the 28d compressive strength of 34.0 MPa and the electrical resistivity of 2.9 Ω m in dry condition, respectively. The results of this paper provided a new way both for the utilization of TBFS and the preparation of conductive cement mortars.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.