Nanochannels coated with semiflexible polymer brushes behave as pressure-responsive gates.

We performed molecular dynamics simulations to study equilibrium and flow properties of a liquid in a nano-channel with confining surfaces coated with a layer of grafted semiflexible polymers. The coverage spans a wide range of grafting densities from essentially isolated chains to dense brushes. The end-grafted polymers were described by a bead spring model with an harmonic potential to include the bond stiffness of the chains. We varied the rigidity of the chains, from fully flexible polymers to rigid rods, in which the configurational entropy of the chains is negligible. The brushliquid interaction was tuned to obtain a super-hydrophobic channel, in which the liquid did not penetrate the polymer brush, giving rise to a Cassie-Baxter state. Equilibrium properties such us brush height and bending energy were measured, varying the grafting density and the stiffness of the polymers. We studied also the characteristics of the brush-liquid interface and the morphology of the polymers chains supporting the liquid for different bending rigidities. Non-equilibrium simulations were performed, moving the walls of the channel in opposite directions at constant speed, obtaining a Couette velocity profile in the bulk liquid. The molecular degrees of freedom of the polymers were studied as a function of the Weissenberg number. Also, the violation of the no-slip boundary condition and the slip properties were analyzed as a function of the shear rate, grafting density and bending stiffness. At high grafting densities, a finite slip length independent of the shear rate or bending constant was found, while at low grafting densities a very interesting non-monotonic behaviour on the bending constant is observed.

We study the influence of chain stiffness on droplet flow in a nanochannel, coated with semiflexible hydrophobic polymers by means of nonequilibrium molecular dynamics simulations. The studied system is then a moving droplet in the slit channel, coexisting with its vapor and subjected to periodic boundary conditions in the flow direction. The polymer chains, grafted by the terminal bead to the confining walls, are described by a coarse-grained model that accounts for chain connectivity, excluded volume interactions and local chain stiffness. The rheological, frictional and dynamical properties of the brush are explored over a wide range of persistence lengths. We find a rich behavior of polymer conformations and concomitant changes in the friction properties over the wide range of studied polymer stiffnesses. A rapid decrease in the droplet velocity was observed as the rigidity of the chains is increased for polymers whose persistence length is smaller than their contour length. We find a strong relation between the internal dynamics of the brush and the droplet transport properties, which could be used to tailor flow properties by surface functionalization. The monomers of the brush layer, under the droplet, present a collective "treadmill belt" like dynamics which can only be present due the existence of grafted chains. We describe its changes in spatial extension upon variations of polymer stiffness, with bidimensional velocity and density profiles. The deformation of the polymer brushes due to the presence of the droplet is analyzed in detail. Lastly, the droplet-gas interaction is studied by varying the liquid to gas ratio, observing a 16% speed increase for droplets that flow close to each other, compared to a train of droplets that present a large gap between consecutive droplets.