In this study, we exploit the excellent fouling resistance of polymer zwitterions and present electrospun nanofiber mats surface-functionalized with poly(2-methacryloyloxyethyl phosphorylcholine) (polyMPC). This zwitterionic polymer coating maximizes the accessibility of the zwitterion to effectively limit biofouling on nanofiber membranes. Two facile, scalable methods yielded a coating on a cellulose nanofiber platform: (i) a two-step sequential deposition featuring dopamine polymerization followed by the physioadsorption of polyMPC; and (ii) a one-step codeposition of polydopamine (PDA) with polyMPC. While the sequential and codeposited nanofiber mat assemblies have an equivalent average fiber diameter, hydrophilic contact angle, surface chemistry, and stability, the topography of nanofibers prepared by codeposition were smoother. Protein and microbial antifouling performance of the zwitterion modified nanofiber mats along with two controls, cellulose (unmodified) and PDA coated nanofiber mats were evaluated by dynamic protein fouling and prolonged bacteria exposure experiments. Following 21 days of exposure to bovine serum albumin, the sequential nanofiber mats significantly resisted protein fouling, as indicated by their 95% flux recovery ratio in a water flux experiment, 300% improvement over the cellulose nanofiber mats. When challenged with two model microbes Escherichia coli and Staphylococcus aureus for 24 hr, both zwitterion modifications demonstrated superior fouling resistance by statistically reducing microbial attachment over the two controls. This study demonstrates that by decorating the surfaces of chemically and mechanically robust cellulose nanofiber mats with polyMPC, we can generate high performance, free-standing nanofiber mats that hold potential in applications where antifouling materials are imperative, such as tissue engineering scaffolds and water purification technologies.
In this study, we have improved membrane performance by enhancing ultrafiltration membranes with electrospun nanofibers. The high-porosity nanofiber layer provides a tailorable platform that does not affect the base membrane structure. To decouple the effects that nanofiber chemistry and morphology have on membrane performance, two polymers commonly used in the membrane industry, cellulose and polysulfone, were electrospun into a layer that was 50 μm thick and consisted of randomly accumulated 1-μm-diameter fibers. Fouling resistance was improved and selectivity was retained by ultrafiltration membranes enhanced with a layer of either cellulose or polysulfone nanofibers. Potentially because of their better mechanical integrity, the polysulfone nanofiber-membranes demonstrated a higher pure-water permeance across a greater range of transmembrane pressures than the cellulose nanofiber-membranes and control membranes. This work demonstrates that nanofiber-enhanced membranes hold potential as versatile materials platforms for improving the performance of ultrafiltration membranes.
Numerous engineered and natural environments suffer deleterious effects from biofouling and/or biofilm formation. For instance, bacterial contamination on biomedical devices pose serious health concerns. In membrane-based technologies, such as desalination and wastewater reuse, biofouling decreases membrane lifetime, and increases the energy required to produce clean water. Traditionally, approaches have combatted bacteria using bactericidal agents. However, due to globalization, a decline in antibiotic discovery, and the widespread resistance of microbes to many commercial antibiotics and metallic nanoparticles, new materials, and approaches to reduce biofilm formation are needed. In this mini-review, we cover the recent strategies that have been explored to combat microbial contamination without exerting evolutionary pressure on microorganisms. Renewable feedstocks, relying on structure-property relationships, bioinspired/nature-derived compounds, and green processing methods are discussed. Greener strategies that mitigate biofouling hold great potential to positively impact human health and safety.
As demand for clean water increases, there is a growing need for effective sustainable water treatment systems. We used the symbiotic culture of bacteria and yeast (SCOBY) that forms while brewing kombucha tea as a living water filtration membrane (LFM). The LFMs function as ultrafiltration membranes with a permeability of 135 ± 25 L m–2 h–1 bar–1 and a 90% rejection of 30 nm nanoparticles. Because they contain living microorganisms that produce cellulose fibers, the surface of an LFM heals after a puncture or incision. Following punctures or incisions, membrane permeability, after a rapid increase postpuncture, returns to 110–250% of the original flux after 10 days in a growth solution. Additionally, LFMs may be manufactured using readily available materials, increasing membrane production accessibility.
We demonstrate antifouling ultrafiltration membranes with retained selectivity and pure water flux through the controlled deposition of zwitterionic polymers and poly(ethylene glycol) (PEG). Molecules for polymerization were immobilized on the membrane's surface yet prevented from attaching to the membrane's pores due to a backflow of nitrogen (N) gas achieved using an in-house constructed apparatus that we named the polymer prevention apparatus, or "PolyPrev". First, the operating parameters of the PolyPrev were optimized by investigating the polymerization of dopamine, which was selected due to its versatility in enabling further chemical reactions, published metrics for comparison, and its oxidative self-polymerization. Membrane characterization revealed that the polydopamine-modified membranes exhibited enhanced hydrophilicity; moreover, their size selectivity and pure water flux were statistically the same as those of the unmodified membranes. Because it is well documented that polydopamine coatings do not provide a long-lasting antifouling activity, poly(2-methacryloyloxyethyl phosphorylcholine) (polyMPC, M = 30 kDa) and succinimidyl-carboxymethyl-ester-terminated PEG ( M = 40 kDa) were codeposited while dopamine was polymerizing to generate antifouling membranes. Statistically, the molecular-weight cutoff of the polyMPC- and PEG-functionalized membranes synthesized in the PolyPrev was equivalent to that of the unmodified membranes, and the pure water flux of the PEG membranes was equivalent to that of the unmodified membranes. Notably, membranes prepared in the PolyPrev with polyMPC and PEG decreased bovine serum albumin fouling and Escherichia coli attachment. This study demonstrates that by restricting antifouling chemistries from attaching within the pores of membranes, we can generate high-performance, antifouling membranes appropriate for a wide range of water treatment applications without compromising intrinsic transport properties.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.