We present here a brief review of direct force measurements between hydrophobic surfaces in aqueous solutions. For almost 70 years, researchers have attempted to understand the hydrophobic effect (the low solubility of hydrophobic solutes in water) and the hydrophobic interaction or force (the unusually strong attraction of hydrophobic surfaces and groups in water). After many years of research into how hydrophobic interactions affect the thermodynamic properties of processes such as micelle formation (selfassembly) and protein folding, the results of direct force measurements between macroscopic surfaces began to appear in the 1980s. Reported ranges of the attraction between variously prepared hydrophobic surfaces in water grew from the initially reported value of 80 -100 Å to values as large as 3,000 Å. Recent improved surface preparation techniques and the combination of surface force apparatus measurements with atomic force microscopy imaging have made it possible to explain the long-range part of this interaction (at separations >200 Å) that is observed between certain surfaces. We tentatively conclude that only the short-range part of the attraction (<100 Å) represents the true hydrophobic interaction, although a quantitative explanation for this interaction will require additional research. Although our force-measuring technique did not allow collection of reliable data at separations <10 Å, it is clear that some stronger force must act in this regime if the measured interaction energy curve is to extrapolate to the measured adhesion energy as the surface separation approaches zero (i.e., as the surfaces come into molecular contact).hydrophobic effect ͉ surface forces ͉ patchy bilayers ͉ interfacial slip ͉ capillary bridges A s early as 1937 (1), researchers recognized the complexity of the problem of the low affinity of nonpolar groups for water and postulated an entropic origin for the effect because of its strong temperature dependence. In a landmark paper by Frank and Evans (2), a first attempt at providing a detailed theory of the hydrophobic effect was made. Frank and Evans described water molecules rearranging into a microscopic ''iceberg'' around a nonpolar molecule and discussed the entropic ramifications of this ''freezing.'' Several years later, Klotz (3) developed a general theory of the bond between two nonpolar molecules, and in 1959, the term ''hydrophobic bond'' was coined by Kauzmann (4) to describe the tendency toward adhesion between the nonpolar groups of proteins in aqueous solution. Kauzmann suggested that this bond was probably among the most important factors in the stabilization of certain folded configurations in native proteins.Although the term hydrophobic bond is still used today, as early as 1968, several researchers began to take issue with this description of the hydrophobic interaction (5). Use of the word ''bond'' was considered inappropriate, given that the attraction between nonpolar groups lacked any of the characteristic features that distinguish chemical bonds from v...
The surface forces apparatus (SFA) has been used for many years to measure the physical forces between surfaces, such as van der Waals (including Casimir) and electrostatic forces in vapors and liquids, adhesion and capillary forces, forces due to surface and liquid structure (e.g. solvation and hydration forces), polymer, steric and hydrophobic interactions, bio-specific interactions as well as friction and lubrication forces. Here we describe recent developments in the SFA technique, specifically the SFA 2000, its simplicity of operation and its extension into new areas of measurement of both static and dynamic forces as well as both normal and lateral (shear and friction) forces. The main reason for the greater simplicity of the SFA 2000 is that it operates on one central simple-cantilever spring to generate both coarse and fine motions over a total range of seven orders of magnitude (from millimeters to ångstroms). In addition, the SFA 2000 is more spacious and modulated so that new attachments and extra parts can easily be fitted for performing more extended types of experiments (e.g. extended strain friction experiments and higher rate dynamic experiments) as well as traditionally non-SFA type experiments (e.g. scanning probe microscopy and atomic force microscopy) and for studying different types of systems.
Geckos can run rapidly on walls and ceilings, requiring high friction forces (on walls) and adhesion forces (on ceilings), with typical step intervals of Ϸ20 ms. The rapid switching between gecko foot attachment and detachment is analyzed theoretically based on a tape model that incorporates the adhesion and friction forces originating from the van der Waals forces between the submicronsized spatulae and the substrate, which are controlled by the (macroscopic) actions of the gecko toes. The pulling force of a spatula along its shaft with an angle between 0 and 90°to the substrate, has a ''normal adhesion force'' contribution, produced at the spatula-substrate bifurcation zone, and a ''lateral friction force'' contribution from the part of spatula still in contact with the substrate. High net friction and adhesion forces on the whole gecko are obtained by rolling down and gripping the toes inward to realize small pulling angles between the large number of spatulae in contact with the substrate. To detach, the high adhesion͞friction is rapidly reduced to a very low value by rolling the toes upward and backward, which, mediated by the lever function of the setal shaft, peels the spatulae off perpendicularly from the substrates. By these mechanisms, both the adhesion and friction forces of geckos can be changed over three orders of magnitude, allowing for the swift attachment and detachment during gecko motion. The results have obvious implications for the fabrication of dry adhesives and robotic systems inspired by the gecko's locomotion mechanism.tape model ͉ pulling angle ͉ lever function ͉ spatula ͉ seta
A tape peeling model based on the geometry of the peel zone (PZ) is derived to predict the peeling behavior of adhesive tapes at peel angles less than or equal to 90o . The PZ model adds an angle-dependent multiplier to the 'Kendall equation' that takes into account the geometrical changes within the peel zone. The model is compared to experimental measurements of the peel force at different angles for a model tape and two commercial tapes, each with different bending moduli, stretch moduli and adhesive strengths. Good agreement is found for a wide range of peel angles. The PZ model is also applied to the gecko adhesive system and predicts a spatula peel angle of 18.4 o to achieve the adhesion forces reported for single setae. The PZ model captures the fact that adhesive forces can be significantly enhanced by peeling at an angle, thereby exploiting high friction forces between the detaching material and the substrate.
Tau is an intrinsically unstructured microtubule (MT)-associated protein capable of binding to and organizing MTs into evenly spaced parallel assemblies known as ''MT bundles.'' How tau achieves MT bundling is enigmatic because each tau molecule possesses only one MT-binding region. To dissect this complex behavior, we have used a surface forces apparatus to measure the interaction forces of the six CNS tau isoforms when bound to mica substrates in vitro. Two types of measurements were performed for each isoform: symmetric configuration experiments measured the interactions between two tau-coated mica surfaces, whereas ''asymmetric'' experiments examined tau-coated surfaces interacting with a smooth bare mica surface. Depending on the configuration (of which there were 12), the forces were weakly adhesive, strongly adhesive, or purely repulsive. The equilibrium spacing was determined mainly by the length of the tau projection domain, in contrast to the adhesion force/energy, which was determined by the number of repeats in the MT-binding region. Taken together, the data are incompatible with tau acting as a monomer; rather, they indicate that two tau molecules associate in an antiparallel configuration held together by an electrostatic ''zipper'' of complementary salt bridges composed of the N-terminal and central regions of each tau monomer, with the C-terminal MT-binding regions extending outward from each end of the dimeric backbone. This tau dimer determines the length and strength of the linker holding two MTs together and could be the fundamental structural unit of tau, underlying both its normal and pathological action.bridging interaction ͉ intrinsically unstructured proteins ͉ protein dimerization ͉ surface forces ͉ bioadhesion T he neural microtubule (MT)-associated protein (MAP) tau is essential for the proper development and maintenance of the nervous system. Among other functions, tau promotes the assembly of MTs into well organized, evenly spaced bundles in neuronal axons (1-6) and regulates the growing and shortening dynamics of individual MTs (7-11). Tau dysfunction has long been correlated with many neurodegenerative diseases, including Alzheimer's and related dementias. In the past decade, mutational analyses have demonstrated a direct cause-and-effect relationship between tau dysfunction and/or misregulation and the dramatic neuronal cell death underlying many of these dementias [for example,]. Some mutations cause amino acid substitutions in tau, whereas others are regulatory, causing aberrant patterns of tau RNA splicing without affecting the tau amino acid sequence.As a result of alternative RNA splicing, there are six naturally occurring isoforms of tau expressed in the CNS (Fig. 1). Based on sequence analysis and structure-function dissection (5,8,9,(15)(16)(17)(18), tau can be viewed as possessing four distinct regions. The C-terminal tail contains both basic and acidic subregions and serves to indirectly regulate tau binding to MTs, at least in part via regulated phosphorylation. On the...
Using a surface forces apparatus (SFA) and an atomic force microscope (AFM) we have studied the effects of surface roughness (root-mean-square (RMS) roughness between 0.3 and 220 nm) on the "contact mechanics", which describes the deformations and loading and unloading adhesion forces, of various polymeric surfaces. For randomly rough, moderately stiff, elastomeric surfaces, the force-distance curves on approach and separation are nearly reversible and almost perfectly exponentially repulsive, with an adhesion on separation that decreases only slightly with increasing RMS. Additionally, the magnitude of the preload force is seen to play a large role in determining the measured adhesion. The exponential repulsion likely arises from the local compressions (fine-grained nano- or submicron-scale deformations) of the surface asperities. The resulting characteristic decay lengths of the repulsion scale with the RMS roughness and correlate very well with a simple finite element method (FEM) analysis based on actual AFM topographical images of the surfaces. For "patterned" surfaces, with a nonrandom terraced structure, no similar exponential repulsion is observed, suggesting that asperity height variability or random roughness is required for the exponential behavior. However, the adhesion force or energy between two "patterned" surfaces fell off dramatically and roughly exponentially as the RMS increased, likely owing to a significant decrease in the contact area which in turn determines their adhesion. For both types of rough surfaces, random and patterned, the coarse-grained (global, meso- or macroscopic) deformations of the initially curved surfaces appear to be Hertzian.
The extraordinary climbing ability of geckos is partially attributed to the fine structure of their toe pads, which contain arrays consisting of thousands of micrometer-sized stalks (setae) that are in turn terminated by millions of fingerlike pads (spatulae) having nanoscale dimensions. Using a surface forces apparatus (SFA), we have investigated the dynamic sliding characteristics of setal arrays subjected to various loading, unloading, and shearing conditions at different angles. Setal arrays were glued onto silica substrates and, once installed into the SFA, brought toward a polymeric substrate surface and then sheared. Lateral shearing of the arrays was initiated along both the "gripping" and "releasing" directions of the setae on the foot pads. We find that the anisotropic microstructure of the setal arrays gives rise to quite different adhesive and tribological properties when sliding along these two directions, depending also on the angle that the setae subtend with respect to the surface. Thus, dragging the setal arrays along the gripping direction leads to strong adhesion and friction forces (as required during contact and attachment), whereas when shearing along the releasing direction, both forces fall to almost zero (as desired during rapid detachment). The results and analysis provide new insights into the biomechanics of adhesion and friction forces in animals, the coupling between these two forces, and the specialized structures that allow them to optimize these forces along different directions during movement. Our results also have practical implications and criteria for designing reversible and responsive adhesives and articulated robotic mechanisms.
Recently reported results indicate that the formation of surfactant-free, oil-in-water emulsions can be significantly enhanced by the almost complete removal of dissolved gases and that the reintroduction of dissolved gases does not immediately destabilize the already-formed emulsions. These initial experiments have been repeated and extended to include a wider range of organic liquids and the application of light scattering to determine droplet size and distribution. The earlier observations have been confirmed. In addition, a systematic trend was found between the solubility of the oil in water and the stability (lifetime) of the degassed oil droplets in water. The lower the solubility, the more stable the emulsion, and for oils that are sparingly soluble in water such as squalane, the small droplets remain stable for several weeks, with buoyancy separation being the main cause of instability of the large droplets with time. The addition of electrolytes, up to molar concentrations, substantially reduces the enhancement of the dispersions on degassing but appears to have little effect on the stability of the already-formed emulsions. The reduction of pH to about 2 significantly reduces both the enhancement of the dispersions on degassing and the stability of the already-formed emulsions. In contrast, the increase of pH to about 11 hardly affects the enhancement of the dispersions on degassing or the stability of the already-formed emulsions. We have confirmed the importance of dissolved gas and its association with the electrostatic effects, but we still cannot provide a complete explanation for the effect of degassing on the hydrophobic dispersions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.