Devices made from stretchable electronic materials could be incorporated into clothing or attached directly to the body. Such materials have typically been prepared by engineering conventional rigid materials such as silicon, rather than by developing new materials. Here, we report a class of wearable and stretchable devices fabricated from thin films of aligned single-walled carbon nanotubes. When stretched, the nanotube films fracture into gaps and islands, and bundles bridging the gaps. This mechanism allows the films to act as strain sensors capable of measuring strains up to 280% (50 times more than conventional metal strain gauges), with high durability, fast response and low creep. We assembled the carbon-nanotube sensors on stockings, bandages and gloves to fabricate devices that can detect different types of human motion, including movement, typing, breathing and speech.

We demonstrate the efficient chemical vapor deposition synthesis of singlewalled carbon nanotubes where the activity and lifetime of the catalysts are enhanced by water. Water-stimulated enhanced catalytic activity results in massive growth of superdense and vertically aligned nanotube forests with heights up to 2.5 millimeters that can be easily separated from the catalysts, providing nanotube material with carbon purity above 99.98%. Moreover, patterned, highly organized intrinsic nanotube structures were successfully fabricated. The water-assisted synthesis method addresses many critical problems that currently plague carbon nanotube synthesis.

We present a rational and general method to fabricate a high-densely packed and aligned single-walled carbon-nanotube (SWNT) material by using the zipping effect of liquids to draw tubes together. This bulk carbon-nanotube material retains the intrinsic properties of individual SWNTs, such as high surface area, flexibility and electrical conductivity. By controlling the fabrication process, it is possible to fabricate a wide range of solids in numerous shapes and structures. This dense SWNT material is advantageous for numerous applications, and here we demonstrate its use as flexible heaters as well as supercapacitor electrodes for compact energy-storage devices.

Stretchability will significantly expand the applications scope of electronics, particularly for large-area electronic displays, sensors and actuators. Unlike for conventional devices, stretchable electronics can cover arbitrary surfaces and movable parts. However, a large hurdle is the manufacture of large-area highly stretchable electrical wirings with high conductivity. Here, we describe the manufacture of printable elastic conductors comprising single-walled carbon nanotubes (SWNTs) uniformly dispersed in a fluorinated rubber. Using an ionic liquid and jet-milling, we produce long and fine SWNT bundles that can form well-developed conducting networks in the rubber. Conductivity of more than 100 S cm(-1) and stretchability of more than 100% are obtained. Making full use of this extraordinary conductivity, we constructed a rubber-like stretchable active-matrix display comprising integrated printed elastic conductors, organic transistors and organic light-emitting diodes. The display could be stretched by 30-50% and spread over a hemisphere without any mechanical or electrical damage.

By using an ionic liquid of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide, we uniformly dispersed single-walled carbon nanotubes (SWNTs) as chemically stable dopants in a vinylidene fluoride-hexafluoropropylene copolymer matrix to form a composite film. We found that the SWNT content can be increased up to 20 weight percent without reducing the mechanical flexibility or softness of the copolymer. The SWNT composite film was coated with dimethyl-siloxane-based rubber, which exhibited a conductivity of 57 siemens per centimeter and a stretchability of 134%. Further, the elastic conductor was integrated with printed organic transistors to fabricate a rubberlike active matrix with an effective area of 20 by 20 square centimeters. The active matrix sheet can be uniaxially and biaxially stretched by 70% without mechanical or electrical damage. The elastic conductor allows for the construction of electronic integrated circuits, which can be mounted anywhere, including arbitrary curved surfaces and movable parts, such as the joints of a robot's arm.

Among all known materials, we found that a forest of vertically aligned single-walled carbon nanotubes behaves most similarly to a black body, a theoretical material that absorbs all incident light. A requirement for an object to behave as a black body is to perfectly absorb light of all wavelengths. This important feature has not been observed for real materials because materials intrinsically have specific absorption bands because of their structure and composition. We found a material that can absorb light almost perfectly across a very wide spectral range (0.2-200 m). We attribute this black body behavior to stem from the sparseness and imperfect alignment of the vertical single-walled carbon nanotubes.absorbance ͉ emissivity ͉ reflectance A black body is a theoretical object that absorbs all light that falls on it, because no light is transmitted or reflected (1). As a result, it appears perfectly black at room temperature and is the most efficient thermal absorber and emitter because any object at thermal equilibrium will emit the same amount of light as it absorbs at every wavelength. The radiation spectrum of a black body is determined solely by the temperature and not by the material, properties, and structure. These features, as an ideal source to emit or absorb radiation, make the black body valuable for many applications. For example, because the black body efficiently converts light to heat, it has great importance to solar energy collectors (2-5) and infrared thermal detectors, such as pyroelectric sensors (6-8). As a perfect emitter of radiation, a hot material with black body behavior would create an efficient infrared heater and would be valuable for heat liberation (9), particularly in space or in a vacuum where convective cooling is negligible.A requirement for an object to behave as a black body is that it perfectly absorbs light of all wavelengths; yet, in reality, black bodies do not exist. Emissivity is a measure of how similar an object is to a black body and is defined as the ratio of the energy radiated by that object and by a black body. Therefore, a black body would possess emissivity of unity for all wavelengths. This important feature has not been observed for real materials because materials intrinsically have specific absorption bands because of their structure and composition, and thus, the emissivity of any real object is less than unity and is wavelength dependent.A good approximation of a black body is a cavity; however, this structure limits its utility. A material exhibiting black body behavior would solve this structural limitation and increase its practical usefulness. Hence, various processes and materials have been developed to blacken the surface by chemical treatment (10, 11), plating (4-6), and painting (8). Despite these efforts, emissivities for black coatings (Astro Black), chemically treated black surfaces (Hino Black), and microscale needle-like structure of nickel-phosphorus alloy (Anritsu Black) can be as high as 0.96 at 5-9 m but decreases notably at Ͼ9 m (Fig...

No abstract

Here we investigate the kinetics of water-assisted CVD (henceforth denoted as supergrowth CVD) by a quantitative time-evolution analysis based on a simple growth model. We found that the supergrowth can be well described by a model where the dynamics of the catalyst activity is treated similar to radioactive decay. An in-depth analysis based on this growth model revealed the kinetics of the supergrowth CVD, showing a scale relationship between the carbon source and water, and elucidated the role of water as a catalyst activity enhancer and preserver.