The electronic properties of molecular junctions of the general type carbon/molecule/TiO2Au were examined as examples of "molecular heterojunctions" consisting of a molecular monolayer and a semiconducting oxide. Junctions containing fluorene bonded to pyrolyzed photoresist film (PPF) were compared to those containing Al2O3 instead of fluorene, and those with only the TiO2 layer. The responses to voltage sweep and pulse stimulation were strongly dependent on junction composition and temperature. A transient current response lasting a few milliseconds results from injection and trapping of electrons in the TiO2 layer, and occurred in all three junction types studied. Conduction in PPFTiO2Au junctions is consistent with space charge limited conduction at low voltage, then a sharp increase in current once the space charge fills all the traps. With fluorene present, there is a slower, persistent change in junction conductance which may be removed by a reverse polarity pulse. This "memory" effect is attributed to a redox process in the TiO2 which generates TiIII and/or TiII, which have much higher conductance than TiO2 due to the presence of conduction band electrons. The redox process amounts to "dynamic doping" of the TiO2 layer by the imposed electric field. The memory effect arises from a combination of the properties of the molecular and oxide layers, and is a special property of the molecular heterojunction configuration.

The properties of silicon in hybrid CMOSimolecular capacitors were successfully engineered to produce multiple bit and long retention-time devices. Charge storage molecules were attached to silicon substrates to produce multiple bit and long retention time characteristics that may be attractive for nanoscale high density memory applications. IntroductionA hybrid silicodmolecular approach, where molecules are integrated with silicon devices, can provide a bridge between CMOS-only and future molecular-only technologies [l-41. The advantages of molecular-based memory devices include nanoscale sue, low voltage operation and multiple-state properties. Multiple-state