Knowledge of the relationship between structure and function of the normal pulmonary arterial tree is necessary for understanding normal pulmonary hemodynamics and the functional consequences of the vascular remodeling that accompanies pulmonary vascular diseases. In an effort to provide a means for relating the measurable vascular geometry and vessel mechanics data to the mean pressure-flow relationship and longitudinal pressure profile, we present a mathematical model of the pulmonary arterial tree. The model is based on the observation that the normal pulmonary arterial tree is a bifurcating tree in which the parent-to-daughter diameter ratios at a bifurcation and vessel distensibility are independent of vessel diameter, and although the actual arterial tree is quite heterogeneous, the diameter of each route, through which the blood flows, tapers from the arterial inlet to essentially the same terminal arteriolar diameter. In the model the average route is represented as a tapered tube through which the blood flow decreases with distance from the inlet because of the diversion of flow at the many bifurcations along the route. The taper and flow diversion are expressed in terms of morphometric parameters obtained using various methods for summarizing morphometric data. To help put the model parameter values in perspective, we applied one such method to morphometric data obtained from perfused dog lungs. Model simulations demonstrate the sensitivity of model pressure-flow relationships to variations in the morphometric parameters. Comparisons of simulations with experimental data also raise questions as to the "hemodynamically" appropriate ways to summarize morphometric data.

Little is known about the constituent hemodynamic consequences of structural changes that occur in the pulmonary arteries during the onset and progression of pulmonary arterial remodeling. Many disease processes are known to be responsible for vascular remodeling that leads to pulmonary arterial hypertension, cor pulmonale, and death. Histology has been the primary tool for evaluating pulmonary remodeling, but it does not provide information on intact vascular structure or the vessel mechanical properties. This study is an extension of our previous work in which we developed an alternative imaging technique to evaluate pulmonary arterial structure. The lungs from Sprague-Dawley rats were removed, perfusion analysis was performed on the isolated lungs, and then an X-ray contrast agent was used to fill the arterial network for imaging. The lungs were scanned over a range of intravascular pressures by volumetric micro-computed tomography, and the arterial morphometry was mapped and measured in the reconstructed isotropic volumes. A quantitative assessment of hemodynamic, structural, and biomechanical differences between rats exposed for 21 days to hypoxia (10% O(2)) or normoxia (21.0% O(2)) was performed. One metric, the normalized distensibility of the arteries, is significantly (P < 0.001) larger [0.025 +/- 0.0011 (SE) mmHg(-1)] (n = 9) in normoxic rats compared with hypoxic [0.015 +/- 0.00077 (SE) mmHg(-1)] (n = 9). The results of the study show that these models can be applied to the Sprague-Dawley rat data and, specifically, can be used to differentiate between the hypoxic and the control groups.

Although the use of currently available noise reduction filters improves image noise and ameliorates beam-hardening artifacts at low-dose CT, such filters are limited by a compromise in lesion conspicuity and appearance in comparison with lesion conspicuity and appearance on baseline low-dose CT images.

The objective of this study was to develop an X-ray computed tomographic method for measuring pulmonary arterial dimensions and locations within the intact rat lung. Lungs were removed from rats and their pulmonary arterial trees were filled with perfluorooctyl bromide to enhance X-ray absorbance. The lungs were rotated within the cone of the X-ray beam projected from a microfocal X-ray source onto an image intensifier, and 360 images were obtained at 1 degrees increments. The three-dimensional image volumes were reconstructed with isotropic resolution using a cone beam reconstruction algorithm. The vessel diameters were obtained by fitting a functional form to the image of the vessel circular cross section. The functional form was chosen to take into account the point spread function of the image acquisition and reconstruction system. The diameter measurements obtained over a range of vascular pressures were used to characterize the distensibility of the rat pulmonary arteries. The distensibility coefficient alpha [defined by D(P) = D(0)(1 + alphaP), where D(P) is the diameter at intravascular pressure (P)] was approximately 2.8% mmHg and independent of vessel diameter in the diameter range (about 100 to 2,000 mm) studied.