We report the fabrication and characterization of carbon microelectrode arrays (MEAs) and their application to spatially and temporally resolve neurotransmitter release from single pheochromocytoma (PC12) cells. The carbon MEAs are composed of individually addressable 2.5-mum-radius microdisks embedded in glass. The fabrication involves pulling a multibarrel glass capillary containing a single carbon fiber in each barrel into a sharp tip, followed by beveling the electrode tip to form an array (10-20 microm) of carbon microdisks. This simple fabrication procedure eliminates the need for complicated wiring of the independent electrodes, thus allowing preparation of high-density individually addressable microelectrodes. The carbon MEAs have been characterized using scanning electron microscopy, steady-state and fast-scan voltammetry, and numerical simulations. Amperometric results show that subcellular heterogeneity in single-cell exocytosis can be electrochemically detected with MEAs. These ultrasmall electrochemical probes are suitable for detecting fast chemical events in tight spaces, as well as for developing multifunctional electrochemical microsensors.

This article reviews recent work involving electrochemical methods for in vitro analysis of biomolecules, with an emphasis on detection and manipulation at and of single cells and cultures of cells. The techniques discussed include constant potential amperometry, chronoamperometry, cellular electroporation, scanning electrochemical microscopy, and microfluidic platforms integrated with electrochemical detection. The principles of these methods are briefly described, followed in most cases with a short description of an analytical or biological application and its significance. The use of electrochemical methods to examine specific mechanistic issues in exocytosis is highlighted, as a great deal of recent work has been devoted to this application.

Here we report a new type of microelectrode sensor for single-cell exocytotic dopamine release. The new microsensor is built by forming a gold-nanoparticle (AuNP) network on a carbon fiber microelectrode. First a gold surface is obtained on a carbon fiber microdisk electrode by partially etching away the carbon followed by electrochemical deposition of gold into the pore. The gold surface is chemically functionalized with a sol-gel silicate network derived from (3-mercaptopropyl)trimethoxysilane (MPTS). A AuNP network is formed by immobilizing Au nanoparticles onto the thiol groups in the sol-gel silicate network. The AuNP-network microelectrode has been characterized by scanning electron microscopy (SEM) and steady-state voltammetry. The AuNP-network microelectrode has been used for amperometric detection of exocytotic dopamine secretion from individual pheochromocytoma (PC12) cells. The results show significant differences in the kinetic peak parameters including shorter rise time, decay time, and half-width as compared to a bare carbon fiber electrode equivalent. These results indicate AuNP-network microelectrodes possess an excellent sensing activity for single-cell exocytotic catecholamine release, specifically dopamine. Moreover, key advantageous properties inherent to bare carbon fiber microelectrodes (i.e., rigidity, flexibility, and small size) are maintained in addition to an observed prolonged shelf life stability and resistance to cellular debris fouling and dopamine polymerization.

By exploiting the capabilities of steady-state electrochemical measurements, we have measured the inner diameter of a lipid nanotube using Fick's first law of diffusion in conjunction with an imposed linear concentration gradient of electroactive molecules over the length of the nanotube. Fick's law has been used in this way to provide a direct relationship between the nanotube diameter and the measurable experimental parameters Δi (change in current) and nanotube length. Catechol was used to determine the Δi attributed to its flux out of the nanotube. Comparing the nanotube diameter as a function of nanotube length revealed that membrane elastic energy was playing an important role in determining the size of the nanotube and was different when the tube was connected to either end of two vesicles or to a vesicle on one end and a pipette tip on the other. We assume that repulsive interaction between neck regions can be used to explain the trends observed. This theoretical approach based on elastic energy considerations provides a qualitative description consistent with experimental data.