Single-cell proteomics (SCP) has great potential to advance biomedical research and personalized medicine. The sensitivity of such measurements increases with low-flow separations (<100 nL/min) due to improved ionization efficiency, but the time required for sample loading, column washing, and regeneration in these systems can lead to low measurement throughput and inefficient utilization of the mass spectrometer. Herein, we developed a two-column liquid chromatography (LC) system that dramatically increases the throughput of label-free SCP using two parallel subsystems to multiplex sample loading, online desalting, analysis, and column regeneration. The integration of MS1-based feature matching increased proteome coverage when short LC gradients were used. The high-throughput LC system was reproducible between the columns, with a 4% difference in median peptide abundance and a median CV of 18% across 100 replicate analyses of a single-cell-sized peptide standard. An average of 621, 774, 952, and 1622 protein groups were identified with total analysis times of 7, 10, 15, and 30 min, corresponding to a measurement throughput of 206, 144, 96, and 48 samples per day, respectively. When applied to single HeLa cells, we identified nearly 1000 protein groups per cell using 30 min cycles and 660 protein groups per cell for 15 min cycles. We explored the possibility of measuring cancer therapeutic targets with a pilot study comparing the K562 and Jurkat leukemia cell lines. This work demonstrates the feasibility of high-throughput label-free single-cell proteomics.

The bulky dehydroamino acids dehydrovaline (ΔVal) and dehydroethylnorvaline (ΔEnv) can be inserted into the turn regions of β-hairpin peptides without altering their secondary structures. These residues increase proteolytic stability, with ΔVal at the (i + 1) position having the most substantial impact. Additionally, a bulky dehydroamino acid can be paired with a D-amino acid (i.e., D-Pro) to synergistically enhance resistance to proteolysis. A link between proteolytic stability and peptide structure is established by the finding that a stabilized ΔVal-containing β-hairpin is more highly folded than its Asn-containing congener.

The sensitivity of single-cell proteomics (SCP) has increased dramatically in recent years due to advances in experimental design, sample preparation, separations and mass spectrometry instrumentation. Further increasing the sensitivity of SCP methods and instrumentation will enable the study of proteins within single cells that are expressed at copy numbers too small to be measured by current methods. Here we combine efficient nanoPOTS sample preparation and ultra-low-flow liquid chromatography with a newly developed data acquisition and analysis scheme termed wide window acquisition (WWA) to quantify >3,000 proteins from single cells in fast label-free analyses. WWA is based on data-dependent acquisition (DDA) but employs larger precursor isolation windows to intentionally co-isolate and co-fragment additional precursors along with the selected precursor. The resulting chimeric MS2 spectra are then resolved using the CHIMERYS search engine within Proteome Discoverer 3.0. Compared to standard DDA workflows, WWA employing isolation windows of 8-12 Th increases peptide and proteome coverage by ~28% and ~39%, respectively. For a 40-min LC gradient operated at ~15 nL/min, we identified an average of 2,150 proteins per single-cell-sized aliquots of protein digest directly from MS2 spectra, which increased to an average of 3,524 proteins including proteins identified with MS1-level feature matching. Reducing the active gradient to 20 min resulted in a modest 10% decrease in proteome coverage. We also compared the performance of WWA with DIA. DIA underperformed WWA in terms of proteome coverage, especially with faster separations. Average proteome coverage for single HeLa and K562 cells was respectively 1,758 and 1,642 based on MS2 identifications with 1% false discovery rate and 3042 and 2891 with MS1 feature matching. As such, WWA combined with efficient sample preparation and rapid separations extends the depths of the proteome that can be studied at the single-cell level.

Sample preparation for single-cell proteomics is generally performed in a one-pot workflow with multiple dispensing and incubation steps. These hours-long processes can be labor intensive and lead to long sample-to-answer times. Here we report a sample preparation method that achieves cell lysis, protein denaturation, and digestion in 1 h using commercially available high-temperature-stabilized proteases with a single reagent dispensing step. Four different one-step reagent compositions were evaluated, and the mixture providing the highest proteome coverage was compared to the previously employed multistep workflow. The one-step preparation increases proteome coverage relative to the previous multistep workflow while minimizing labor input and the possibility of human error. We also compared sample recovery between previously used microfabricated glass nanowell chips and injection-molded polypropylene chips and found the polypropylene provided improved proteome coverage. Combined, the one-step sample preparation and the polypropylene substrates enabled the identification of an average of nearly 2400 proteins per cell using a standard data-dependent workflow with Orbitrap mass spectrometers. These advances greatly simplify sample preparation for single-cell proteomics and broaden accessibility with no compromise in terms of proteome coverage.

No abstract