The synergism of large surface area, multiscale porous structure, and good conductivity endows hierarchical carbon nanocages with high-level supercapacitive performances. Further nitrogen doping greatly improves the hydrophilicity, which boosts the supercapacitive performances to an ultrahigh specific capacitance of up to 313 F g(-1) at 1 A g(-1).

Supercapacitor electrode materials: Carbon nanocages are conveniently produced by an in situ MgO template method and demonstrate high specific capacitance over a wide range of charging-discharging rates with high stability, superior to the most carbonaceous supercapacitor electrode materials to date. The large specific surface area, good mesoporosity, and regular structure are responsible for the excellent performance.

The carbon dioxide reduction reaction (CO 2 RR) presents the opportunity to consume CO 2 and produce desirable products. However, the alkaline conditions required for productive CO 2 RR result in the bulk of input CO 2 being lost to bicarbonate and carbonate. This loss imposes a 25% limit on the conversion of CO 2 to multicarbon (C 2+ ) products for systems that use anions as the charge carrierand overcoming this limit is a challenge of singular importance to the field. Here, we find that cation exchange membranes (CEMs) do not provide the required locally alkaline conditions, and bipolar membranes (BPMs) are unstable, delaminating at the membrane−membrane interface. We develop a permeable CO 2 regeneration layer (PCRL) that provides an alkaline environment at the CO 2 RR catalyst surface and enables local CO 2 regeneration. With the PCRL strategy, CO 2 crossover is limited to 15% of the amount of CO 2 converted into products, in all cases. Low crossover and low flow rate combine to enable a single pass CO 2 conversion of 85% (at 100 mA/cm 2 ), with a C 2+ faradaic efficiency and full cell voltage comparable to the anion-conducting membrane electrode assembly.

Single-walled carbon nanotubes and chitosan composite yarn is prepared using a wet-spinning method. After thermal treatment, mesoporous all-carbon yarn is obtained. Based on this material, flexible all-solid-state yarn micro-supercapacitors are fabricated. Electrochemical results show high specific capacitance and energy density, good rate capability and stable cycling life. Results of this research offer prospect for application in portable and wearable electronics.

In alkaline and neutral MEA CO2 electrolyzers, CO2 rapidly converts to (bi)carbonate, imposing a significant energy penalty arising from separating CO2 from the anode gas outlets. Here we report a CO2 electrolyzer uses a bipolar membrane (BPM) to convert (bi)carbonate back to CO2, preventing crossover; and that surpasses the single-pass utilization (SPU) limit (25% for multi-carbon products, C2+) suffered by previous neutral-media electrolyzers. We employ a stationary unbuffered catholyte layer between BPM and cathode to promote C2+ products while ensuring that (bi)carbonate is converted back, in situ, to CO2 near the cathode. We develop a model that enables the design of the catholyte layer, finding that limiting the diffusion path length of reverted CO2 to ~10 μm balances the CO2 diffusion flux with the regeneration rate. We report a single-pass CO2 utilization of 78%, which lowers the energy associated with downstream separation of CO2 by 10× compared with past systems.