A new hybrid-drive (HD) nonisobaric ignition scheme of inertial confinement fusion (ICF) is proposed, in which a HD pressure to drive implosion dynamics increases via increasing density rather than temperature in the conventional indirect drive (ID) and direct drive (DD) approaches. In this HD (combination of ID and DD) scheme, an assembled target of a spherical hohlraum and a layered deuterium-tritium capsule inside is used. The ID lasers first drive the shock to perform a spherical symmetry implosion and produce a large-scale corona plasma. Then, the DD lasers, whose critical surface in ID corona plasma is far from the radiation ablation front, drive a supersonic electron thermal wave, which slows down to a high-pressure electron compression wave, like a snowplow, piling up the corona plasma into high density and forming a HD pressurized plateau with a large width. The HD pressure is several times the conventional ID and DD ablation pressure and launches an enhanced precursor shock and a continuous compression wave, which give rise to the HD capsule implosion dynamics in a large implosion velocity. The hydrodynamic instabilities at imploding capsule interfaces are suppressed, and the continuous HD compression wave provides main pdV work large enough to hotspot, resulting in the HD nonisobaric ignition. The ignition condition and target design based on this scheme are given theoretically and by numerical simulations. It shows that the novel scheme can significantly suppress implosion asymmetry and hydrodynamic instabilities of current isobaric hotspot ignition design, and a high-gain ICF is promising.

In the present Letter, we investigate a spherical hohlraums with octahedral six laser entrance holes (LEHs) for inertial fusion, which has advantages over the conventional hohlraums of cylindrical geometry since it contains only one cone at each LEH and the problems caused by the beam overlap and crossed-beam energy transfer can be eliminated and the backscattering can be reduced. In particular, our study indicates that at a specific hohlraum-to-capsule radius ratio, i.e., the golden ratio, the flux asymmetry on capsule can be significantly reduced. From our study, this golden octahedral hohlraum has robust high symmetry, low plasma filling and low backscattering. Though the golden octahedral hohlraum needs 30% more laser energy than traditional cylinder for producing the ignition radiation pulse of 300 eV, it is worth for a robust high symmetry and low backscattering. The proposed octahedral hohlraum is also flexible and can be applicable to diverse inertial fusion drive approaches. As an application, we design an ignition octahedral hohlraum for the hybrid drive.PACS numbers: 52.70. La, 52.35.Tc, 47.40.Nm Introduction-The hohlraum is crucial for the inertial fusions of both indirect drive [1][2][3] and the hybrid indirectdirect drive proposed recently (HID) [4]. In the indirect drive approach, the hohlraum is first heated by laser beams to a few million Kelvin and then the energy flux of the transferred X-ray radiation compress the deuterium-tritium capsule at a convergence ratio of 25 to 45, making the nuclear fuel finally burn in a self-sustained way. In the corresponding hohlraum design, the hohlraum shape, size and the number of Laser Entrance Hole (LEH) are optimized to balance tradeoffs among the needs for capsule symmetry, the acceptable hohlraum plasma filling, the requirements for energy and power, and the laser plasma interactions. Among many requirements, the energy coupling and flux symmetry are of most concerned. A higher energy coupling will economize the input energy and increase the fusion energy gain. More importantly, a very uniform flux from the hohlraum on the shell of capsule is mandatory because a small drive asymmetry of 1% [2] can lead to the failure of ignition. Actually, the small flux asymmetry will be magnified during the compression process due to the varied kinds of instabilities and results in a serious hot-cold fuel mixture that can dramatically lessen the temperature or density of the hot spot for ignition.Various hohlraums with different shapes have been proposed and investigated, such as cylinder hohlraum [1,2], rugby hohlraum [5-10] and elliptical hohlraum [11]. These hohlraums are elongated with a length-to-diameter ratio greater than unity and have cylindrically symmetry with two LEHs on the ends. Among all above hohlraums, the cylindrical hohlraums are used most often in inertial fusion studies and are chosen as the ignition hohlraum on NIF [3,12,13], though it breaks the spherical symmetry and leads to cross coupling between the modes.Intuitively, spherical hohlraum h...

In this paper, we give a review of our theoretical and experimental progress in octahedral spherical hohlraum study. From our theoretical study, the octahedral spherical hohlraums with 6 Laser Entrance Holes (LEHs) of octahedral symmetry have robust high symmetry during the capsule implosion at hohlraum-to-capsule radius ratio larger than 3.7. In addition, the octahedral spherical hohlraums also have potential superiority on low backscattering without supplementary technology. We studied the laser arrangement and constraints of the octahedral spherical hohlraums, and gave a design on the laser arrangement for ignition octahedral hohlraums. As a result, the injection angle of laser beams of 50°–60° was proposed as the optimum candidate range for the octahedral spherical hohlraums. We proposed a novel octahedral spherical hohlraum with cylindrical LEHs and LEH shields, in order to increase the laser coupling efficiency and improve the capsule symmetry and to mitigate the influence of the wall blowoff on laser transport. We studied on the sensitivity of the octahedral spherical hohlraums to random errors and compared the sensitivity among the octahedral spherical hohlraums, the rugby hohlraums and the cylindrical hohlraums, and the results show that the octahedral spherical hohlraums are robust to these random errors while the cylindrical hohlraums are the most sensitive. Up till to now, we have carried out three experiments on the spherical hohlraum with 2 LEHs on Shenguang(SG) laser facilities, including demonstration of improving laser transport by using the cylindrical LEHs in the spherical hohlraums, spherical hohlraum energetics on the SGIII prototype laser facility, and comparisons of laser plasma instabilities between the spherical hohlraums and the cylindrical hohlraums on the SGIII laser facility.

A recent publication [K. Lan et al., Phys. Plasmas 21, 010704 (2014)] proposed a spherical hohlraum with six laser entrance holes of octahedral symmetry at a specific hohlraum-to-capsule radius ratio of 5.14 for inertial fusion study, which has robust high symmetry during the capsule implosion and superiority on low backscatter without supplementary technology. This paper extends the previous one by studying the laser arrangement and constraints of octahedral hohlraum in detail. As a result, it has serious beam crossing at h L 45 , and h L ¼ 50 to 60 is proposed as the optimum candidate range for the golden octahedral hohlraum, here h L is the opening angle that the laser quad beam makes with the Laser Entrance Hole (LEH) normal direction. In addition, the design of the LEH azimuthal angle should avoid laser spot overlapping on hohlraum wall and laser beam transferring outside hohlraum from a neighbor LEH. The octahedral hohlraums are flexible and can be applicable to diverse inertial fusion drive approaches. This paper also applies the octahedral hohlraum to the recent proposed hybrid indirect-direct drive approach. V C 2014 AIP Publishing LLC.

No abstract

A space-resolving flux detector (SRFD) is developed to measure the X-ray flux emitted from a specified region in hohlraum with a high resolution up to 0.11mm for the first time. This novel detector has been used successfully to measure the distinct X-ray fluxes emitted from hot laser spot and cooler re-emitting region simultaneously, in the hohlraum experiments on SGIII prototype laser facility. According to our experiments, the ratio of laser spot flux to re-emitted flux shows a strong time-dependent behavior, and the area-weighted flux post-processed from the measured laser spot flux and re-emitting wall flux agrees with that measured from Laser Entrance Hole by using flat-response X-ray detector (F-XRD). The experimental observations is reestablished by our two-dimensional hydrodynamic simulations and is well understood with the power balance relationship.

We investigate a new laser-driven spherically convergent plasma fusion scheme (SCPF) that can produce thermonuclear neutrons stably and efficiently. In the SCPF scheme, laser beams of nanosecond pulse duration and 10^{14}-10^{15}  W/cm^{2} intensity uniformly irradiate the fuel layer lined inside a spherical hohlraum. The fuel layer is ablated and heated to expand inwards. Eventually, the hot fuel plasmas converge, collide, merge, and stagnate at the central region, converting most of their kinetic energy to internal energy, forming a thermonuclear fusion fireball. With the assumptions of steady ablation and adiabatic expansion, we theoretically predict the neutron yield Y_{n} to be related to the laser energy E_{L}, the hohlraum radius R_{h}, and the pulse duration τ through a scaling law of Y_{n}∝(E_{L}/R_{h}^{1.2}τ^{0.2})^{2.5}. We have done experiments at the ShengGuangIII-prototype facility to demonstrate the principle of the SCPF scheme. Some important implications are discussed.

Radiation transfer in low-density foam is influenced by the external radiation field which impacts on the foam when the size of plasma created in laboratory is not large to be opatical thick. The radiation transfers of different photon groups are sensitive probes of the conditions of the medium through which they propagate. The temporal behavior of photon groups to which the plasma is optical thin is quite different from that of photon groups to which the plasma is optical thick. The breakout times of different photon groups through the foam are distinguishable different in experiment when we measures them at the end of foam. The multi-group supersonic radiation transfer behavior in low-density foam is studied both by multi-group transfer numerical simulation and experiments. Two characteristic photon groups are chosen to do experimental research on the multi-group transfer behavior in low-density CH foam. A time-resolved chromatic streaked X-ray spectrometer measure the breakout of the two photon group from the far end of the foam cylinder. The distinguishable transfer time delay between two groups is observed.