The quality of a wound roll is highly dependent upon the in-roll stress distribution, which is controlled by the operating parameters of the center-wind torque, nip and tension. With increasing demands for higher performance of paper winding systems in terms of higher winding speeds, wider web widths and larger wound roll diameters, it becomes of vital importance to determine and understand the optimum operating conditions of these machines. In this paper, a numerical formulation for estimating the in-roll stress of a wound roll is proposed with taking account of the effect of nonlinearity in web compressibility, airentrainment and permeance. The in-roll stress is calculated as the superposition of the stress increments caused by each winding. The theory of elasto-hydrodynamic lubrication with the compressibility of air is introduced to evaluate the effect of air-entrainment at the roll-inlet. Permeance of air is newly incorporated into the winding model, which is expressed under the assumption that permeance is proportional to the pressure difference of both sides of a web. In order to assure the applicability of the proposed theory, winding tests were conducted using the dry-end section of the paper-making pilot machine. The numerical analysis and experimental observation show the significant effect of the air-entrainment and permeance upon the in-roll stress.
IntroductionIn the paper industry, winding is one of the important operations of the paper (or more generally 'web') handling process, which controls the quality of final products. With increasing demands for higher performance of paper winding machines, it is getting more delicate to maintain the stable winding operations. For example, high-speed winding of coated paper sometimes causes roll defects, such as irregular movement of the paper in its lateral direction and wrinkles, due to the air-entrainment in the wound roll.In order to cope with such difficulties, in-roll stress fields of wound rolls, especially the influences of winding parameters, have been investigated experimentally and theoretically by many researchers in the past. Researches [1] and [2] are well known as presenting basic winding models, and they are widely used for the process design of winding in paper industries. After their propositions, these models have been verified by many other researchers and several modifications of the models have been proposed. The present authors, [3], also extended the model and examined the conditions to cause wrinkles or breakage in a wound roll. This
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.