In this study, we investigated the effect of silica (SiO2) layer included in a cathode catalyst layer (CL) on the performance for polymer electrolyte fuel cells (PEFCs). Porous carbons such as Ketjen black (KB) have been widely used as a support for Pt catalysts in PEFCs. Such KB-supported Pt catalyst (Pt/KB) was used as a cathode CL with low ionomer content (a condition of low proton conductivity). The Pt/KB was then coated with SiO2. In addition, the Pt/KB and SiO2-coated Pt/KB (SiO2-Pt/KB) were measured and analyzed under relative humidity (RH) conditions (100% and 20%). The catalyst ink of SiO2-Pt/KB showed higher stability and dispersion compared to Pt/KB, due to the hydrophilic surface characteristics of SiO2, which act as a binder-like ionomer. The performance of the SiO2-Pt/KB at 100% RH, was significantly lower than that of Pt/KB, whereas the performance of the Pt/KB at 20% RH, was significantly improved by SiO2 coating. This is due to an increase in the proton conductivity, which can be attributed to the hydrophilic properties of SiO2. Based on these results, the effect of SiO2 coating on performance, depending on carbon supports of SiO2-coated Pt/Carbon catalysts, could be evaluated.
Optimization of the structure of cathode catalyst layers (CCLs) for promoting the transfer of reactants and products in polymer electrolyte fuel cells (PEFCs) is important for improving the cell performance. In this study, using theoretical equations, we confirmed that the shortened proton conduction path in the ionomer layer (IL) with a 3D-patterned structure, compared to that in the IL with a flat-patterned structure, can improve the cell performance. We experimentally investigated the effect of the IL with a 3D-patterned structure included in the CCLs on the cell performance. Based on the combination of the flat- or 3D-pattern of the IL and the catalyst layer (CL), the samples were categorized as Str. 1 (3D-patterned CL without IL), Str. 2 (flat-patterned IL and CL), Str. 3 (3D-patterned IL and flat-patterned CL), and Str. 4 (3D-patterned IL and CL). All of the samples had different morphologies. According to the I–V curves and impedance spectra data acquired at 80 °C and 40% relative humidity, Str. 4 showed superior cell performance relative to those of the other CCLs. These results indicate that the structure of Str. 4 enhanced the proton conductivity at a low humidity at which proton conduction is usually poor, thereby resulting in improved cell performance.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.