Supercapacitors, also called ultracapacitors or electrochemical capacitors, store electrical charge on high-surface-area conducting materials. Their widespread use is limited by their low energy storage density and relatively high effective series resistance. Using chemical activation of exfoliated graphite oxide, we synthesized a porous carbon with a Brunauer-Emmett-Teller surface area of up to 3100 square meters per gram, a high electrical conductivity, and a low oxygen and hydrogen content. This sp(2)-bonded carbon has a continuous three-dimensional network of highly curved, atom-thick walls that form primarily 0.6- to 5-nanometer-width pores. Two-electrode supercapacitor cells constructed with this carbon yielded high values of gravimetric capacitance and energy density with organic and ionic liquid electrolytes. The processes used to make this carbon are readily scalable to industrial levels.

Hierarchical zeolites are a class of microporous catalysts and adsorbents that also contain mesopores, which allow for fast transport of bulky molecules and thereby enable improved performance in petrochemical and biomass processing. We used repetitive branching during one-step hydrothermal crystal growth to synthesize a new hierarchical zeolite made of orthogonally connected microporous nanosheets. The nanosheets are 2 nanometers thick and contain a network of 0.5-nanometer micropores. The house-of-cards arrangement of the nanosheets creates a permanent network of 2- to 7-nanometer mesopores, which, along with the high external surface area and reduced micropore diffusion length, account for higher reaction rates for bulky molecules relative to those of other mesoporous and conventional MFI zeolites.

This review focuses on important aspects of applying physisorption for the pore structural characterization of hierarchical materials such as mesoporous zeolites. During the last decades major advances in understanding the adsorption and phase behavior of fluids confined in ordered nanoporous materials have been made, which led to major progress in the physisorption characterization methodology (summarized in the 2015 IUPAC report on physisorption characterization). Here we discuss progress and challenges for the physisorption characterization of nanoporous solids exhibiting various levels of porosity from micro- to macropores. While physisorption allows one to assess micro- and mesopores, a widely employed method for textural analysis of macroporous materials is mercury porosimetry and we also review important insights associated with the underlying mechanisms governing mercury intrusion/extrusion experiments. Hence, although the main focus of this review is on physical adsorption, we strongly emphasize the importance of combining advanced physical adsorption with other complementary experimental techniques for obtaining a reliable and comprehensive understanding of the texture of hierarchically structured materials.

No abstract

The stability of a variety of microporous coordination polymers (MCPs) to water-containing solutions was studied using powder X-ray diffraction. It was determined that the stability of the MCP is related to the metal cluster present in the structure with trinuclear chromium clusters more stable than copper paddlewheel clusters which are more stable than basic zinc acetate clusters. Zn(2-methylimidizolate) 2 was found to be more water stable than zinc MCPs with carboxylate linkers; however, extended exposure to water led to decomposition of all zinc-based MCPs. Mat eriaux de l'Institut Lavoisier (MIL)-100 was also found to be completely water stable and was used to adsorb the pharmaceuticals furosemide and sulfasalazine from water with large uptakes achievable at low concentrations, indicating that the adsorption of wastewater contaminants may be a feasible application for these materials.

The use of sulfur in the next generation Li-ion batteries is currently precluded by its poor cycling stability caused by irreversible Li 2 S formation and the dissolution of soluble polysulfi des in organic electrolytes that leads to parasitic cell reactions. Here, a new C/S cathode material comprising short-chain sulfur species (predominately S 2 ) confi ned in carbonaceous subnanometer and the unique charge mechanism for the subnano-entrapped S 2 cathodes are reported. The fi rst charge-discharge cycle of the C/S cathode in the carbonate electrolyte forms a new type of thiocarbonate-like solid electrolyte interphase (SEI). The SEI coated C/S cathode stably delivers ≈600 mAh g −1 capacity over 4020 cycles (0.0014% loss cycle −1 ) at ≈100% Coulombic effi ciency. Extensive X-ray photoelectron spectroscopy analysis of the discharged cathodes shows a new type of S 2 species and a new carbide-like species simultaneously, and both peaks disappear upon charging. These data suggest a new sulfur redox mechanism involving a separated Li + /S 2− ion couple that precludes Li 2 S compound formation and prevents the dissolution of soluble sulfur anions. This new charge/discharge process leads to remarkable cycling stability and reversibility.

The utility of microporous coordination polymers (MCPs) for the adsorption of large organosulfur compounds (benzothiophene, dibenzothiophene, 4,6-dimethyldibenzothiophene) found in fuels is demonstrated. Large capacities are obtained at both low and high sulfur concentrations. For 4,6-dimethyldibenzothiophene, the compound most difficult to remove using current industrial techniques, a capacity of 41 g S/kg MCP at 1500 ppmw S is achieved by UMCM-150. It was determined that the size/shape of the pores in the MCP, rather than the surface area or pore volume, is the most important factor controlling adsorption capacity.

No abstract