Here, we explore the enhancement of single molecule emission by polymeric nano-antenna that can harvest energy from thousands of donor dyes to a single acceptor. In this nano-antenna, the cationic dyes are brought together in very close proximity using bulky counterions, thus enabling ultrafast diffusion of excitation energy (≤30 fs) with minimal losses. Our 60-nm nanoparticles containing >10,000 rhodamine-based donor dyes can efficiently transfer energy to 1-2 acceptors resulting in an antenna effect of ~1,000. Therefore, single Cy5-based acceptors become 25-fold brighter than quantum dots QD655. This unprecedented amplification of the acceptor dye emission enables observation of single molecules at illumination powers (1-10 mW cm-2) that are >10,000-fold lower than typically required in single-molecule measurements. Finally, using a basic setup, which includes a 20X air objective and a sCMOS camera, we could detect single Cy5 molecules by simply shining divergent light on the sample at powers equivalent to sunlight.

Fluorescent nanoparticles (NPs) help to increase spatial and temporal resolution in bioimaging. Advanced microscopy techniques require very bright NPs that exhibit either stable emission for single-particle tracking or complete on/off switching (blinking) for super-resolution imaging. Here, ultrabright dye-loaded polymer NPs with controlled switching properties are developed. To this aim, the salt of a dye (rhodamine B octadecyl ester) with a hydrophobic counterion (fluorinated tetraphenylborate) is encapsulated at very high concentrations up to 30 wt % in NPs made of poly(lactic-co-glycolic acid) (PLGA), poly(methyl methacrylate) (PMMA), and polycaprolactone (PCL) through nanoprecipitation. The obtained 35 nm NPs are nearly 100 times brighter than quantum dots. The nature of the polymer is found to define the collective behavior of the encapsulated dyes so that NPs containing thousands of dyes exhibit either whole particle blinking, for PLGA, or stable emission, for PMMA and PCL. Fluorescence anisotropy measurements together with small-angle X-ray scattering experiments suggest that in less hydrophobic PLGA, dyes tend to cluster, whereas in more hydrophobic PMMA and PCL, dyes are dispersed within the matrix, thus altering the switching behavior of NPs. Experiments using a perylene diimide derivative show a similar effect of the polymer nature. The resulting fluorescent NPs are suitable for a wide range of imaging applications from tracking to super-resolution imaging. The findings on the organization of the load innside NPs will have impact on the development of materials for applications ranging from photovoltaics to drug delivery.

Because of the limited signal-to-background ratio, molecular diagnostics requires molecular amplification of the target molecules or molecular signal amplification after target recognition. For direct molecular detection, we demonstrate a purely physical fluorescence enhancement process which can elevate the fluorescence signal of single fluorescent dyes by several orders of magnitude. To this end, DNA origami-based optical antennas with a height of around 125 nm are used, which utilize metallic nanoparticles to create a hotspot where fluorescence signals are enhanced by plasmonic effects. By equipping the hotspot with a molecular beacon-like structure, we combine the plasmonic signal enhancement with a specific signal generation, leading to an enhanced and therefore easy to detect signal only in the presence of the specific target nucleic acid. Exemplified with Zika virus detection, we show the applicability of this approach by detecting Zika-specific artificial DNA and RNA both in buffer and in heat-inactivated human blood serum. We show the sensitivity against small nucleotide variations of this approach, allowing the discrimination of closely related pathogens. Furthermore, we show how the modularity offered by DNA nanotechnology enables multiplexing by incorporating orthogonal fluorescent labels for the simultaneous detection of different sequences. The achieved signal enhancement will allow technically simplified signal detection, paving the way for single molecule-based point-of-care diagnosis.

Fluorescent organic nanoparticles (NPs) are attractive alternatives to quantum dots due to their potential biodegradability. However, preparation of fluorescent organic NPs is challenging due to the problem of self-quenching of the encapsulated dyes. Moreover, the photostability of organic dyes is much lower than that of quantum dots. To address both problems, we studied encapsulation into biodegradable polymer PLGA NPs of perylene diimide (PDI) derivatives, which are among the most photostable dyes reported to date. Two PDIs were tested, one bearing bulky hydrophobic groups at the imides, while the other was substituted in both imide and bay regions (Lumogen Red). Encapsulation of the former resulted in aggregation, which was accompanied by the emission color change from green to red, some decrease in the fluorescence quantum yield and a significant drop in the photostability, unexpected for PDI dyes. In contrast, Lumogen Red showed nearly no aggregation inside polymer NPs and maintained high quantum yield and photostability. According to wide-field fluorescence microscopy with a 532 nm excitation laser, our 40 nm PLGA NPs loaded with 1 wt% Lumogen Red were >10-fold brighter than quantum dots (QD-585). These NPs were stable in biological media, including serum, and entered spontaneously into HeLa cells by endocytosis showing no sign of cytotoxicity. Due to excellent photostability, these nanoparticles could be considered as biodegradable substitutes of quantum dots in bioimaging.

The advent of highly sensitive photodetectors and the development of photostabilization strategies made detecting the fluorescence of single molecules a routine task in many labs around the world. However, to this day, this process requires cost-intensive optical instruments due to the truly nanoscopic signal of a single emitter. Simplifying single-molecule detection would enable many exciting applications, e.g., in point-of-care diagnostic settings, where costly equipment would be prohibitive. Here, we introduce addressable NanoAntennas with Cleared HOtSpots (NACHOS) that are scaffolded by DNA origami nanostructures and can be specifically tailored for the incorporation of bioassays. Single emitters placed in NACHOS emit up to 461-fold (average of 89 ± 7-fold) brighter enabling their detection with a customary smartphone camera and an 8-US-dollar objective lens. To prove the applicability of our system, we built a portable, battery-powered smartphone microscope and successfully carried out an exemplary single-molecule detection assay for DNA specific to antibiotic-resistant Klebsiella pneumonia on the road.

Fluorescent dyes used for single-molecule spectroscopy can undergo millions of excitation-emission cycles before photobleaching. Due to the upconcentration of light in a plasmonic hotspot, the conditions for fluorescent dyes are even more demanding in DNA origami nanoantennas. Here, we briefly review the current state of fluorophore stabilization for single-molecule imaging and reveal additional factors relevant in the context of plasmonic fluorescence enhancement. We show that despite the improved photostability of single-molecule fluorophores by DNA origami nanoantennas, their performance in the intense electric fields in plasmonic hotspots is still limited by the underlying photophysical processes, such as formation of dim states and photoisomerization. These photophysical processes limit the photon count rates, increase heterogeneity and aggravate quantification of fluorescence enhancement factors. These factors also reduce the time resolution that can be achieved in biophysical single-molecule experiments. Finally, we show how the photophysics of a DNA hairpin assay with a fluorophore-quencher pair can be influenced by plasmonic DNA origami nanoantennas leading to implications for their use in fluorescence-based diagnostic assays. Especially, we show that such assays can produce false positive results by premature photobleaching of the dark quencher.

Hydrophobicity of a fluorescent cargo loaded into PLGA nanoparticles is crucial for minimizing its leakage in biological media.

† These authors contributed equallyThe advent of highly sensitive photodetectors 1,2 and the development of photostabilization strategies 3 made detecting the fluorescence of a single molecule a routine task in many labs around the world. However, to this day, this process requires cost-intensive optical instruments due to the truly nanoscopic signal of a single emitter. Simplifying single-molecule detection would enable many exciting applications, e.g. in point-of-care diagnostic settings, where costly equipment would be prohibitive. 4 Here, we introduce addressable NanoAntennas with Cleared HOtSpots (NACHOS) that are scaffolded by DNA origami nanostructures and can be specifically tailored for the incorporation of bioassays. Single emitters placed in the NACHOS emit up to 461-fold brighter enabling their detection with a customary smartphone camera and an 8-US-dollar objective lens. To prove the applicability of our system, we built a portable, battery-powered smartphone microscope and successfully carried out an exemplary single-molecule detection assay for DNA specific to antibiotic-resistant Klebsiella pneumonia "on the road ".Early detection of disease biomarkers generally requires high sensitivity enabled by molecular amplification mechanisms 5-9 or physical signal enhancement of commonly used fluorescence signals. [10][11][12][13] Physical fluorescence signal enhancement could enable sensitivity improvement, detection of singlemolecules on cost-effective and mobile devices and therefore help to distinguish specific signals against an unavoidable background of impurities even in low-resource settings. Fluorescence from emitters such as fluorescent dyes can be enhanced using plasmonic nanoantennas, [14][15][16] and the challenge of placing quantum emitters in their hotspots was overcome using DNA origami as constructing material. 17,18 The immense requirements for small, defined and rigid gaps between the gold or silver nanoparticles forming the gap in the nanoantenna aggravated the usability of the space between the nanoparticles for a biosensing assay that could thus far only be realized with mono-particle antennas and low enhancement values. 19 In this work, we introduce NACHOS that enable high fluorescence signal amplification and use them for a single-molecule diagnostic assay on a portable and inexpensive smartphone microscope. A novel threedimensional DNA origami structure was designed ( Fig. 1a) and folded from an M13mp18-derived scaffold strand and complementary staple strands ( Supplementary Tables 1-3). The NACHOS origami design uses two pillars to attach silver nanoparticles and creates the plasmonic hotspot at the bifurcation in the gap between the two pillars and the nanoparticles (see DNA origami sketches in Fig. 1a and full NACHOS structure in Fig.