Abstract:The content and distribution of stilbenes and resin acids in Scots pine (Pinus sylvestris) and spruce (Picea abies), sampled in central Norway, have been examined. The contents of pinosylvin stilbenes in pine heartwood/living knots were 0.2-2/2-8 % (w/w). No stilbenes could be detected in spruce (Picea abies). The resin acid contents of pine sapwood/heartwood and knots were 1-4 and 5-10 % (w/w), respectively. Minor amounts of resin acids (<0.2/<0.04 %w/w) were identified in spruce wood/knots. The lignan content in knots of Norwegian spruce was 6.5 % (w/w). Diastereomerically pure hydroxymatairesinol (HMR, 84 % of total lignans) was readily isolated from this source since only minor quantities (2.6 % of total lignans) of the allo-HMR diastereomer was detected. Insignificant amounts of lignans were present in the sapwood. Lignans could not be detected in the sapwood or knots of Norwegian sallow (Salix caprea), birch (Betula pendula) or juniper (Juniperus communis).

When mouse hybridoma cells were grown in culture media which were made hyperosmotic through the addition of NaCl or sucrose, the specific rate of antibody production increased with medium osmolality, reaching approx. 1.9 times the level obtained at physiological osmolality. However, due to a simultaneous reduction of the maximal cell density in the hyperosmotic media, the effect of the increased production rate did not give significant increases in the maximum antibody titer obtained in the cultures. When the osmoprotective compound, glycine betaine, was included in the NaCl- or sucrose-stressed cultures, the specific antibody production rate wasincreased up to 2.6-fold and maximum antibody titer up to twofold over that obtained in the control culture (physiological osmolality). A similar pattern of response was observed when other osmoprotective compounds (sarcosine, proline, glycine) were added to NaCl-stressed hybridoma cell cultures. For the present experiments, the results suggest that medium osmolality, rather than growth rate, will determine the specific antibody production rate by hybridoma cell line 6H11 growing in hyperosmotic culture media. (c) 1994 John Wiley & Sons, Inc.

The viability of single-step microwave-induced pressurized hot water conditions for co-production of xylan-based biopolymers and bioethanol from aspenwood sawdust and sugarcane trash was investigated. Extraction of hemicelluloses was conducted using microwave-assisted pressurized hot water system. The effects of temperature and time on extraction yield and enzymatic digestibility of resulting solids were determined. Temperatures between 170-200°C for aspenwood and 165-195°C for sugarcane trash; retention times between 8-22min for both feedstocks, were selected for optimization purpose. Maximum xylan extraction yields of 66 and 50%, and highest cellulose digestibilities of 78 and 74%, were attained for aspenwood and sugarcane trash respectively. Monomeric xylose yields for both feedstocks were below 7%, showing that the xylan extracts were predominantly in non-monomeric form. Thus, single-step microwave-assisted hot water method is viable biorefinery approach to extract xylan from lignocelluloses while rendering the solid residues sufficiently digestible for ethanol production.

No abstract