Teeth restored with the biologic dentin post system demonstrated the highest fracture resistance and repairable fractures, closely followed by FRC post system. The least fracture resistance and most catastrophic fractures were demonstrated by the zirconia post system.
To compare the timing of instrumentation and cleaning efficacy between manual K files and NiTi rotary files in extracted primary molars. Study design: in-vitro study was conducted in 90 root canals of extracted primary molars which were subdivided in three groups viz. Control (No instrumentation), Manual (K files), Rotary (ProFiles) with 30 canals in each group. Mesiobuccal (MB) and Mesiolingual (ML) canals of mandibular molars, and MB and Distobuccal (DB) canals of maxillary molars were included in the test group whereas Distal canals in mandibular molars and Palatal canals in maxillary molars were included in the control group. Method: Teeth were mounted and canals were injected with India ink to stain the canal walls. Canal preparation was done as per the group. After instrumentation, teeth were demounted, decalcified and cleared to make them transparent for scoring according to the extent of removal of India ink. Timing of instrumentation and cleaning efficacy of canals in coronal, middle and apical thirds were assessed in each sample. Results: Mean timing of instrumentation in rotary group was 3.54 ± 1.14 min and 4.32 ± 1.04 min in manual group. Mean cleaning efficacy scores in manual and rotary groups were 2.03 and 1.66 in coronal third, 1.08 and 1.18 in middle third and 0.67 and 1.08 in apical third respectively. Inter-group comparisons showed no statistically significant difference in cleaning efficacy among test groups in all thirds of root canals. Conclusion: NiTi rotary technique has comparable cleaning efficacy, with significantly less timing of instrumentation compared to manual K-files.
Sixty bovine teeth with simulated mesio-incisal angle fracture were randomly and equally divided in one untreated (control) group and three experimental groups (Bevel, Chamfer and newly introduced Stair-step Chamfer preparation group) to evaluate the effect of enamel preparations on the fracture resistance of composite resin. Post restoration, fracture mechanics approach was used to quantify the failure of composite resins in testing the samples in Instron testing machine. Mean peak failure load (Newton) of composite amongst experimental groups was observed in the order; Chamfer (326.09 +/- 72.73), Stair-step chamfer (315.21 +/- 81.77) and Bevel (253.83 +/- 67.38). Results of the One-Way ANOVA revealed significant difference in the mean peak failure load values of the four different groups. (P<0.001) Scheffe's Post-Hoc comparison test (Subset for alpha = 0.05) revealed that there was no significant difference in the mean peak failure load values of the bevel, stair-step chamfer and chamfer preparation when considered together, but the mean peak values of control group (605.22 +/- 48.96) were observed significantly higher. Failure mode evaluation revealed, majority of failures occurred as cohesive and mixed type for all the experimental groups. Adhesive type failure was observed maximum (33%) in the bevel group. Stair-step chamfer preparation showed greatest potential for application and use as it no only demonstrated comparable values to Chamfer preparation ['t' value (0.39) (P > 0.05)] but also involved sacrificing less amount of tooth structure adjacent to fractured edge.
Aim
The study was designed to evaluate and compare the success of Biodentine and mineral trioxide aggregate (MTA) in comparison to formocresol as pulpotomy medicaments over 9 months of the follow-up period.
Materials and methods
The sample of 60 deciduous molars of patients aged 4–7 years were incorporated in the study. The molars were randomly allocated to the experimental and control groups. Following coronal pulp removal and achieving hemostasis, the radicular pulp was covered with either Biodentine or MTA (experimental groups). In the control group, a cotton pellet soaked with diluted formocresol (one-fifth dilution of Buckley's formocresol) was placed over the radicular pulp for 1 minute. All pulpotomized molars were later restored with stainless steel crowns (SSCs).
Results
The achieved clinical success over 9 months of the follow-up period was 100, 95, and 70% with Biodentine, MTA, and formocresol, respectively. The achieved radiographic success over 9 months of the follow-up period was 95, 60, and 25% with Biodentine, MTA, and formocresol, respectively.
Conclusion
Favorable biological, physical, mechanical, and good manipulation properties of Biodentine show that this material can be used efficiently as a pulpotomy medicament in the clinical practice.
How to cite this article
Ahuja S, Surabhi K, Gandhi K,
et al.
Comparative Evaluation of Success of Biodentine and Mineral Trioxide Aggregate with Formocresol as Pulpotomy Medicaments in Primary Molars: An
In Vivo
Study. Int J Clin Pediatr Dent 2020;13(2):167–173.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.