On September 28 2018, an Mw 7.5 strike-slip earthquake occurred to the north of Palu Bay on the Sulawesi Island, Indonesia. This triggered a destructive tsunami within the bay, which reached Palu city. Simulation have been conducted to investigate the landslide source. However, the tsunami should be investigated considering a physical model in the area where detailed bathymetric survey had not been conducted. In this study, we investigated the impact of coastal landslides on the southern part of the bay using a two-layer model. Owing to the increasing collapse volume, the southern west coastal landslide could approximately explain the observations in Palu city. However, the calculated mass volume of the source largely overestimated the bathymetric survey data. Hence, we considered the possibility of submarine landslide in the southern part of the bay and the simulation results could approximately explain the maximum tsunami heights in the southern part of the bay. These results suggest that more detailed multibeam data will be required to investigate the possible submarine landslide in the southern area which could induce a destructive tsunami reaching Palu city within a few minutes after the collapse.
Concrete cutting at construction sites causes problems such as noise, vibration, and dust. In particular, during the demolition and renovation work on buildings in urban areas, protection against noise, vibration, dust, etc., is needed. Concrete cutting using a CO2 laser was investigated 20 years ago. However, this method had never used because the equipment is difficult to carry. In this study, we used a portable fibre laser, which is convenient to carry. Two types of concretes with different strengths were prepared for the experiment. High-strength concrete has never been used in similar research before. High-strength concrete is just only used for skyscrapers because of its high quality and costs. Furthermore, it has already been used for skyscrapers in Japan. It is for this reason that we chose to use it in this study. Irradiation measurements were conducted under various conditions using laser powers of 6 and 9 kW. It was confirmed that the cutting effectiveness of CO2 and fibre lasers was approximately identical for concretes with a thickness of 200 mm. Furthermore, the cutting effectiveness for the two concretes with different densities was almost the same. However, the situation after cutting was different because the vitrification of the cutting and glass formation progressed in low-density concrete and an explosion phenomenon occurred in high-density concrete, simultaneously. This study suggests that laser concrete cutting can be used as a solution when noise and dust are major problems.
BackgroundTo allow for correct evaluation of clinical trial results, readers require comprehensive, clear, and highly transparent information on the methodology used and the results obtained. This study aimed to evaluate the quality of reporting in articles on randomized controlled trials (RCTs) of antiretroviral therapy (ART) in the field of HIV/AIDS.MethodsWe searched for original articles on RCTs of ART developed in the field of HIV/AIDS in PubMed database by 5 April 2016. Searched articles were divided into three groups based on the revision year in which the Consolidated Standards of Reporting Trials (CONSORT) guidelines were published: Period 1 (1996–2001); Period 2 (2002–2010); and Period 3 (2011–2016). We evaluated the articles using the reporting rates of the 37 items in the CONSORT 2010 checklist, five items in the protocol deviation, and the three items in the ethics.ResultsFifty-two articles were extracted and included in this study. Many of the reporting rates calculated using the CONSORT 2010 checklist showed a significantly increasing trend over the successive periods (65% in Period 1, 67% in Period 2, 79% in Period 3; p < 0.0001). The items with reporting rates < 50% were “the presence or absence of a protocol change and the reason for such a change,” “randomization and blinding,” and “where the full trial protocol can be accessed.” Reporting rates of deviations were as low as < 30%, while the reporting rates for patient compliance were the highest (>80% in Period 3) among the five items. The reporting rates for obtaining informed consent and approval by the ethics committee or institutional review board were high (>88%), regardless of the time period assessed.ConclusionIn terms of representative RCT articles in the field of HIV/AIDS, the reporting rate of the items defined by CONSORT was approximately 70%, improving over the successive CONSORT statement revision periods.Electronic supplementary materialThe online version of this article (doi:10.1186/s13063-017-2360-2) contains supplementary material, which is available to authorized users.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.