Aim:The fracture of the denture resulting from the accidental fall on the ground is affected by the impact strength of the acrylic resin. Many attempts have been made to improve the mechanical properties of acrylic resin by reinforcing it with different materials. The aim of this study was to evaluate the effect of addition of different nano materials on the impact strength and surface hardness of the acrylic resin. Materials and methods: Fifty samples of dimensions 65 mm × 10 mm × 3 mm were made and divided into five groups. Group I is the control group of heat-activated polymethyl methacrylate (PMMA) acrylic resin, while groups II, III, IV, and V are having 1% and 3% zirconium oxide (ZrO 2 ) and silicon dioxide (SiO 2 ) nanoparticles in heat-activated PMMA by weight, respectively. A metallic block was fabricated and invested into addition silicone impression material to form a mold. The modeling wax was melted and flown into the mold cavity to form the wax block. The samples were subsequently polymerized, retrieved, finished, and polished. Impact strength and surface hardness were measured by Izod impact testing machine and Vickers hardness tester, respectively. Results: The results showed that the control group had the highest impact strength and lowest value was observed with 1% SiO 2 . The value of Vickers hardness was maximum with 1% ZrO 2 and least with the control group. The analysis of variance (ANOVA) for both the impact strength and surface hardness indicated a p value of <0.001, which is very highly significant. Conclusion: Incorporation of ZrO 2 and SiO 2 nanoparticles into the heat-activated PMMA affects the impact strength and surface hardness.
Statement of problem: Provisional restorations play a critical role in the success of restorative treatment so they must maintain their integrity in the oral environment throughout the diagnostic and restorative phases. Purpose: The aim of this study was to compare and evaluate the hardness of four different materials used fabrication of interim restoration. Material and methods: Ten samples with dimensions of 10mmx10mmx2mm were fabricated from four interim materials (DPI, Tempron, Protemp 4 and Transcan). Hardness of samples was measured using Fischer scope hardness tester. Result: The highest mean hardness was found in Heat polymerizing acrylic resin group. ANOVA test indicated F value to be 2201.01 which was highly signifi cant (p < 0.001). Conclusion: Heat polymerizing resin and bisacrylics may be considered in a long term provisional fi xed prosthesis.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.